.\" Text automatically generated by txt2man
.TH IPACCESS-CONFIG 1 "23 March 2023" "" ""
.SH NAME
\fBipaccess-config \fP- Tool to configure an ip.access nanoBTS
\fB
.SH SYNOPSIS
.nf
.fam C
\fBipaccess-config\fP [\fIoptions\fP] <IP_OF_BTS>

.fam T
.fi
.fam T
.fi
.SH DESCRIPTION
\fBipaccess-config\fP is a small command line tool to configure an ip.access nanoBTS.
.PP
You can use this tool to perform basic operations such as setting NVRAM parameters or performing tests.
.PP
It is part of the OpenBSC base station controller from Osmocom.
.SH OPTIONS

Commands for writing to the BTS:
.RS
.TP
.B
\fB-u\fP \fB--unit-id\fP UNIT_ID
Set the Unit ID of the BTS
.TP
.B
\fB-o\fP \fB--oml-ip\fP IP
Set primary OML IP (IP of your BSC)
.TP
.B
\fB-i\fP \fB--ip-address\fP IP/MASK
Set static IP address + netmask of BTS
.TP
.B
\fB-g\fP \fB--ip-gateway\fP IP
Set static IP gateway of BTS
.TP
.B
\fB-r\fP \fB--restart\fP
Restart the BTS (after other operations)
.TP
.B
\fB-n\fP \fB--nvram-flags\fP FLAGS/MASK
Set NVRAM attributes
.TP
.B
\fB-S\fP \fB--nvattr-set\fP FLAG
Set one additional NVRAM attribute
.TP
.B
\fB-U\fP \fB--nvattr-unset\fP FLAG
Set one additional NVRAM attribute
.TP
.B
\fB-l\fP \fB--listen\fP TESTNR
Perform specified test number
.TP
.B
\fB-L\fP \fB--Listen\fP TEST_NAME
Perform specified test
.TP
.B
\fB-s\fP \fB--stream-id\fP ID
Set the IPA Stream Identifier for OML
.TP
.B
\fB-d\fP \fB--software\fP FIRMWARE
Download firmware into BTS
.RE
.PP
Miscellaneous commands:
.RS
.TP
.B
\fB-h\fP \fB--help\fP
this text
.TP
.B
\fB-H\fP \fB--HELP\fP
Print parameter details.
.TP
.B
\fB-f\fP \fB--firmware\fP FIRMWARE
Provide firmware information
.TP
.B
\fB-w\fP \fB--write-firmware\fP
This will dump the firmware parts to the filesystem. Use with \fB-f\fP.
.TP
.B
\fB-p\fP \fB--loop\fP
Loop the tests executed with the \fB--listen\fP command.
.SH SEE ALSO
\fBipaccess-find\fP(1)
.SH AUTHOR
This manual page was written by Ruben Undheim <ruben.undheim@gmail.com> for the Debian project (and may be used by others).
.RE
.PP