.\" .\" Author: Joao Marcelo Martins or .\" Copyright (c) 2010-2012 OpenStack Foundation. .\" .\" Licensed under the Apache License, Version 2.0 (the "License"); .\" you may not use this file except in compliance with the License. .\" You may obtain a copy of the License at .\" .\" http://www.apache.org/licenses/LICENSE-2.0 .\" .\" Unless required by applicable law or agreed to in writing, software .\" distributed under the License is distributed on an "AS IS" BASIS, .\" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or .\" implied. .\" See the License for the specific language governing permissions and .\" limitations under the License. .\" .TH account-server.conf 5 "8/26/2011" "Linux" "OpenStack Swift" .SH NAME .LP .B account-server.conf \- configuration file for the OpenStack Swift account server .SH SYNOPSIS .LP .B account-server.conf .SH DESCRIPTION .PP This is the configuration file used by the account server and other account background services, such as; replicator, auditor and reaper. The configuration file follows the python-pastedeploy syntax. The file is divided into sections, which are enclosed by square brackets. Each section will contain a certain number of key/value parameters which are described later. Any line that begins with a '#' symbol is ignored. You can find more information about python-pastedeploy configuration format at \fIhttp://pythonpaste.org/deploy/#config-format\fR .SH GLOBAL SECTION .PD 1 .RS 0 This is indicated by section named [DEFAULT]. Below are the parameters that are acceptable within this section. .IP "\fBbind_ip\fR" IP address the account server should bind to. The default is 0.0.0.0 which will make it bind to all available addresses. .IP "\fBbind_port\fR" TCP port the account server should bind to. The default is 6202. .IP "\fBkeep_idle\fR" Value to set for socket TCP_KEEPIDLE. The default value is 600. .IP "\fBbind_timeout\fR" Timeout to bind socket. The default is 30. .IP \fBbacklog\fR TCP backlog. Maximum number of allowed pending connections. The default value is 4096. .IP \fBworkers\fR The number of pre-forked processes that will accept connections. Zero means no fork. The default is auto which will make the server try to match the number of effective cpu cores if python multiprocessing is available (included with most python distributions >= 2.6) or fallback to one. It's worth noting that individual workers will use many eventlet co-routines to service multiple concurrent requests. .IP \fBmax_clients\fR Maximum number of clients one worker can process simultaneously (it will actually accept(2) N + 1). Setting this to one (1) will only handle one request at a time, without accepting another request concurrently. The default is 1024. .IP \fBuser\fR The system user that the account server will run as. The default is swift. .IP \fBswift_dir\fR Swift configuration directory. The default is /etc/swift. .IP \fBdevices\fR Parent directory of where devices are mounted. Default is /srv/node. .IP \fBmount_check\fR Whether or not check if the devices are mounted to prevent accidentally writing to the root device. The default is set to true. .IP \fBdisable_fallocate\fR Disable pre-allocate disk space for a file. The default is false. .IP \fBlog_name\fR Label used when logging. The default is swift. .IP \fBlog_facility\fR Syslog log facility. The default is LOG_LOCAL0. .IP \fBlog_level\fR Logging level. The default is INFO. .IP "\fBlog_address\fR Logging address. The default is /dev/log. .IP \fBlog_max_line_length\fR The following caps the length of log lines to the value given; no limit if set to 0, the default. .IP \fBlog_custom_handlers\fR Comma separated list of functions to call to setup custom log handlers. functions get passed: conf, name, log_to_console, log_route, fmt, logger, adapted_logger. The default is empty. .IP \fBlog_udp_host\fR If set, log_udp_host will override log_address. .IP "\fBlog_udp_port\fR UDP log port, the default is 514. .IP \fBlog_statsd_host\fR StatsD server. IPv4/IPv6 addresses and hostnames are supported. If a hostname resolves to an IPv4 and IPv6 address, the IPv4 address will be used. .IP \fBlog_statsd_port\fR The default is 8125. .IP \fBlog_statsd_default_sample_rate\fR The default is 1. .IP \fBlog_statsd_sample_rate_factor\fR The default is 1. .IP \fBlog_statsd_metric_prefix\fR The default is empty. .IP \fBdb_preallocation\fR If you don't mind the extra disk space usage in overhead, you can turn this on to preallocate disk space with SQLite databases to decrease fragmentation. The default is false. .IP \fBeventlet_debug\fR Debug mode for eventlet library. The default is false. .IP \fBfallocate_reserve\fR You can set fallocate_reserve to the number of bytes or percentage of disk space you'd like fallocate to reserve, whether there is space for the given file size or not. Percentage will be used if the value ends with a '%'. The default is 1%. .IP \fBnice_priority\fR Modify scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority. .IP \fBionice_class\fR Modify I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Work only with ionice_priority. .IP \fBionice_priority\fR Modify I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set. .RE .PD .SH PIPELINE SECTION .PD 1 .RS 0 This is indicated by section name [pipeline:main]. Below are the parameters that are acceptable within this section. .IP "\fBpipeline\fR" It is used when you need apply a number of filters. It is a list of filters ended by an application. The normal pipeline is "healthcheck recon account-server". .RE .PD .SH APP SECTION .PD 1 .RS 0 This is indicated by section name [app:account-server]. Below are the parameters that are acceptable within this section. .IP "\fBuse\fR" Entry point for paste.deploy for the account server. This is the reference to the installed python egg. This is normally \fBegg:swift#account\fR. .IP "\fBset log_name\fR Label used when logging. The default is account-server. .IP "\fBset log_facility\fR Syslog log facility. The default is LOG_LOCAL0. .IP "\fBset log_level\fR Logging level. The default is INFO. .IP "\fBset log_requests\fR Enables request logging. The default is True. .IP "\fBset log_address\fR Logging address. The default is /dev/log. .IP "\fBauto_create_account_prefix [deprecated]\fR" The default is ".". Should be configured in swift.conf instead. .IP "\fBreplication_server\fR Configure parameter for creating specific server. To handle all verbs, including replication verbs, do not specify "replication_server" (this is the default). To only handle replication, set to a true value (e.g. "true" or "1"). To handle only non-replication verbs, set to "false". Unless you have a separate replication network, you should not specify any value for "replication_server". The default is empty. .IP \fBnice_priority\fR Modify scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority. .IP \fBionice_class\fR Modify I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Work only with ionice_priority. .IP \fBionice_priority\fR Modify I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set. .RE .PD .SH FILTER SECTION .PD 1 .RS 0 Any section that has its name prefixed by "filter:" indicates a filter section. Filters are used to specify configuration parameters for specific swift middlewares. Below are the filters available and respective acceptable parameters. .IP "\fB[filter:healthcheck]\fR" .RE .RS 3 .IP "\fBuse\fR" Entry point for paste.deploy for the healthcheck middleware. This is the reference to the installed python egg. This is normally \fBegg:swift#healthcheck\fR. .IP "\fBdisable_path\fR" An optional filesystem path which, if present, will cause the healthcheck URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE". .RE .RS 0 .IP "\fB[filter:recon]\fR" .RS 3 .IP "\fBuse\fR" Entry point for paste.deploy for the recon middleware. This is the reference to the installed python egg. This is normally \fBegg:swift#recon\fR. .IP "\fBrecon_cache_path\fR" The recon_cache_path simply sets the directory where stats for a few items will be stored. Depending on the method of deployment you may need to create this directory manually and ensure that swift has read/write. The default is /var/cache/swift. .RE .PD .RS 0 .IP "\fB[filter:xprofile]\fR" .RS 3 .IP "\fBuse\fR" Entry point for paste.deploy for the xprofile middleware. This is the reference to the installed python egg. This is normally \fBegg:swift#xprofile\fR. .IP "\fBprofile_module\fR" This option enable you to switch profilers which should inherit from python standard profiler. Currently the supported value can be 'cProfile', 'eventlet.green.profile' etc. .IP "\fBlog_filename_prefix\fR" This prefix will be used to combine process ID and timestamp to name the profile data file. Make sure the executing user has permission to write into this path (missing path segments will be created, if necessary). If you enable profiling in more than one type of daemon, you must override it with an unique value like, the default is /var/log/swift/profile/account.profile. .IP "\fBdump_interval\fR" The profile data will be dumped to local disk based on above naming rule in this interval. The default is 5.0. .IP "\fBdump_timestamp\fR" Be careful, this option will enable profiler to dump data into the file with time stamp which means there will be lots of files piled up in the directory. The default is false .IP "\fBpath\fR" This is the path of the URL to access the mini web UI. The default is __profile__. .IP "\fBflush_at_shutdown\fR" Clear the data when the wsgi server shutdown. The default is false. .IP "\fBunwind\fR" Unwind the iterator of applications. Default is false. .RE .PD .SH ADDITIONAL SECTIONS .PD 1 .RS 0 The following sections are used by other swift-account services, such as replicator, auditor and reaper. .IP "\fB[account-replicator]\fR" .RE .RS 3 .IP \fBlog_name\fR Label used when logging. The default is account-replicator. .IP \fBlog_facility\fR Syslog log facility. The default is LOG_LOCAL0. .IP \fBlog_level\fR Logging level. The default is INFO. .IP \fBlog_address\fR Logging address. The default is /dev/log. .IP \fBper_diff\fR Maximum number of database rows that will be sync'd in a single HTTP replication request. The default is 1000. .IP \fBmax_diffs\fR This caps how long the replicator will spend trying to sync a given database per pass so the other databases don't get starved. The default is 100. .IP \fBconcurrency\fR Number of replication workers to spawn. The default is 8. .IP "\fBrun_pause [deprecated]\fR" Time in seconds to wait between replication passes. The default is 30. .IP \fBinterval\fR Replaces run_pause with the more standard "interval", which means the replicator won't pause unless it takes less than the interval set. The default is 30. .IP \fBnode_timeout\fR Request timeout to external services. The default is 10 seconds. .IP \fBconn_timeout\fR Connection timeout to external services. The default is 0.5 seconds. .IP \fBreclaim_age\fR Time elapsed in seconds before an account can be reclaimed. The default is 604800 seconds. .IP \fBrsync_compress\fR Allow rsync to compress data which is transmitted to destination node during sync. However, this is applicable only when destination node is in a different region than the local one. The default is false. .IP \fBrsync_module\fR Format of the rsync module where the replicator will send data. See etc/rsyncd.conf-sample for some usage examples. .IP \fBrecon_cache_path\fR Path to recon cache directory. The default is /var/cache/swift. .IP \fBnice_priority\fR Modify scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority. .IP \fBionice_class\fR Modify I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Work only with ionice_priority. .IP \fBionice_priority\fR Modify I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set. .RE .RS 0 .IP "\fB[account-auditor]\fR" .RE .RS 3 .IP \fBlog_name\fR Label used when logging. The default is account-auditor. .IP \fBlog_facility\fR Syslog log facility. The default is LOG_LOCAL0. .IP \fBlog_level\fR Logging level. The default is INFO. .IP \fBlog_address\fR Logging address. The default is /dev/log. .IP \fBinterval\fR Will audit, at most, 1 account per device per interval. The default is 1800 seconds. .IP \fBaccounts_per_second\fR Maximum accounts audited per second. Should be tuned according to individual system specs. 0 is unlimited. The default is 200. .IP \fBrecon_cache_path\fR Path to recon cache directory. The default is /var/cache/swift. .IP \fBnice_priority\fR Modify scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority. .IP \fBionice_class\fR Modify I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Work only with ionice_priority. .IP \fBionice_priority\fR Modify I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set. .RE .RS 0 .IP "\fB[account-reaper]\fR" .RE .RS 3 .IP \fBlog_name\fR Label used when logging. The default is account-reaper. .IP \fBlog_facility\fR Syslog log facility. The default is LOG_LOCAL0. .IP \fBlog_level\fR Logging level. The default is INFO. .IP \fBlog_address\fR Logging address. The default is /dev/log. .IP \fBconcurrency\fR Number of reaper workers to spawn. The default is 25. .IP \fBinterval\fR Minimum time for a pass to take. The default is 3600 seconds. .IP \fBnode_timeout\fR Request timeout to external services. The default is 10 seconds. .IP \fBconn_timeout\fR Connection timeout to external services. The default is 0.5 seconds. .IP \fBdelay_reaping\fR Normally, the reaper begins deleting account information for deleted accounts immediately; you can set this to delay its work however. The value is in seconds. The default is 0. The sum of this value and the container-updater interval should be less than the account-replicator reclaim_age. This ensures that once the account-reaper has deleted a container there is sufficient time for the container-updater to report to the account before the account DB is removed. .IP \fBreap_warn_after\fR If the account fails to be reaped due to a persistent error, the account reaper will log a message such as: Account has not been reaped since You can search logs for this message if space is not being reclaimed after you delete account(s). Default is 2592000 seconds (30 days). This is in addition to any time requested by delay_reaping. .IP \fBnice_priority\fR Modify scheduling priority of server processes. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). The default does not modify priority. .IP \fBionice_class\fR Modify I/O scheduling class of server processes. I/O niceness class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE (idle). The default does not modify class and priority. Work only with ionice_priority. .IP \fBionice_priority\fR Modify I/O scheduling priority of server processes. I/O niceness priority is a number which goes from 0 to 7. The higher the value, the lower the I/O priority of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set. .RE .PD .SH DOCUMENTATION .LP More in depth documentation about the swift-account-server and also OpenStack Swift as a whole can be found at .BI https://docs.openstack.org/swift/latest/admin_guide.html and .BI https://docs.openstack.org/swift/latest/ .SH "SEE ALSO" .BR swift-account-server(1),