Scroll to navigation

containers-storage.conf(5) May 2017 containers-storage.conf(5)

NAME

storage.conf - Syntax of Container Storage configuration file

DESCRIPTION

The STORAGE configuration file specifies all of the available container storage options for tools using shared container storage, but in a TOML format that can be more easily modified and versioned.

FORMAT

The [TOML format][toml] is used as the encoding of the configuration file. Every option and subtable listed here is nested under a global "storage" table. No bare options are used. The format of TOML can be simplified to:

[table]
option = value
[table.subtable1]
option = value
[table.subtable2]
option = value

STORAGE TABLE

The storage table supports the following options:

graphroot=""
container storage graph dir (default: "/var/lib/containers/storage")
Default directory to store all writable content created by container storage programs

runroot=""
container storage run dir (default: "/var/run/containers/storage")
Default directory to store all temporary writable content created by container storage programs

driver=""
container storage driver (default: "overlay")
Default Copy On Write (COW) container storage driver
Valid drivers are "overlay", "vfs", "devmapper", "aufs", "btrfs", and "zfs"
Some drivers (for example, "zfs", "btrfs", and "aufs") may not work if your kernel lacks support for the filesystem

STORAGE OPTIONS TABLE

The storage.options table supports the following options:

additionalimagestores=[]
Paths to additional container image stores. Usually these are read/only and stored on remote network shares.

size=""
Maximum size of a container image. This flag can be used to set quota on the size of container images. (default: 10GB)

mount_program=""
Specifies the path to a custom program to use instead for mounting the file system.

mountopt=""

Comma separated list of default options to be used to mount container images. Suggested value "nodev".

[storage.options.thinpool]

Storage Options for thinpool

The storage.options.thinpool table supports the following options:

autoextend_percent=""

Tells the thinpool driver the amount by which the thinpool needs to be grown. This is specified in terms of % of pool size. So a value of 20 means that when threshold is hit, pool will be grown by 20% of existing pool size. (default: 20%)

autoextend_threshold=""

Tells the driver the thinpool extension threshold in terms of percentage of pool size. For example, if threshold is 60, that means when pool is 60% full, threshold has been hit. (default: 80%)

basesize=""

Specifies the size to use when creating the base device, which limits the size of images and containers. (default: 10g)

blocksize=""

Specifies a custom blocksize to use for the thin pool. (default: 64k)

directlvm_device=""

Specifies a custom block storage device to use for the thin pool. Required for using graphdriver devicemapper.

directlvm_device_force=""

Tells driver to wipe device (directlvm_device) even if device already has a filesystem. (default: false)

fs="xfs"

Specifies the filesystem type to use for the base device. (default: xfs)

log_level=""

Sets the log level of devicemapper.

0: LogLevelSuppress 0 (default)
2: LogLevelFatal
3: LogLevelErr
4: LogLevelWarn
5: LogLevelNotice
6: LogLevelInfo
7: LogLevelDebug

min_free_space=""

Specifies the min free space percent in a thin pool required for new device creation to succeed. Valid values are from 0% - 99%. Value 0% disables. (default: 10%)

mkfsarg=""

Specifies extra mkfs arguments to be used when creating the base device.

use_deferred_removal=""

Marks devicemapper block device for deferred removal. If the device is in use when its driver attempts to remove it, the driver tells the kernel to remove the device as soon as possible. Note this does not free up the disk space, use deferred deletion to fully remove the thinpool. (default: true).

use_deferred_deletion=""

Marks thinpool device for deferred deletion. If the thinpool is in use when the driver attempts to delete it, the driver will attempt to delete device every 30 seconds until successful, or when it restarts. Deferred deletion permanently deletes the device and all data stored in the device will be lost. (default: true).

xfs_nospace_max_retries=""

Specifies the maximum number of retries XFS should attempt to complete IO when ENOSPC (no space) error is returned by underlying storage device. (default: 0, which means to try continuously.)

ostree_repo=""
Tell storage drivers to use the specified OSTree repository. Some storage drivers, such as overlay, might use

skip_mount_home="" Tell storage drivers to not create a PRIVATE bind mount on their home directory.

SElinux labeling.

When running on an SELinux system, if you move the containers storage graphroot directory, you must make sure the labeling is correct.

Tell SELinux about the new containers storage by setting up an equivalence record. This tells SELinux to label content under the new path, as if it was stored under /var/lib/containers/storage.

semanage fcontext -a -e /var/lib/containers NEWSTORAGEPATH
restorecon -R -v /src/containers

The semanage command above tells SELinux to setup the default labeling of NEWSTORAGEPATH to match /var/lib/containers. The restorecon command tells SELinux to apply the labels to the actual content.

Now all new content created in these directories will automatically be created with the correct label.

SEE ALSO

semanage(8), restorecon(8)

FILES

Distributions often provide a /usr/share/containers/storage.conf file to define default storage configuration. Administrators can override this file by creating /etc/containers/storage.conf to specify their own configuration. The storage.conf file for rootless users is stored in the $HOME/.config/containers/storage.conf file.

HISTORY

May 2017, Originally compiled by Dan Walsh ⟨dwalsh@redhat.com⟩ Format copied from crio.conf man page created by Aleksa Sarai ⟨asarai@suse.de⟩

Container Storage Configuration File Dan Walsh