## table of contents

- buster 1:21.2.6+dfsg-1
- testing 1:23.2.6+dfsg-1
- unstable 1:23.2.6+dfsg-1
- experimental 1:24.0.4+dfsg-1

crypto(3erl) | Erlang Module Definition | crypto(3erl) |

# NAME¶

crypto - Crypto Functions# DESCRIPTION¶

This module provides a set of cryptographic functions.**Hash functions:**

**SHA1, SHA2:**- Secure Hash Standard [FIPS PUB 180-4]
**SHA3:**- SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions [FIPS PUB 202]
**BLAKE2:**- BLAKE2 — fast secure hashing
**MD5:**- The MD5 Message Digest Algorithm [RFC 1321]
**MD4:**- The MD4 Message Digest Algorithm [RFC 1320]

**MACs - Message Authentication Codes:**

**Hmac functions:**- Keyed-Hashing for Message Authentication [RFC 2104]
**Cmac functions:**- The AES-CMAC Algorithm [RFC 4493]
**POLY1305:**- ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]

**Symmetric Ciphers:**

**DES, 3DES and AES:**- Block Cipher Techniques [NIST]
**Blowfish:**- Fast Software Encryption, Cambridge Security Workshop Proceedings (December 1993), Springer-Verlag, 1994, pp. 191-204.
**Chacha20:**- ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]
**Chacha20_poly1305:**- ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]

**Modes:**

**ECB, CBC, CFB, OFB and CTR:**- Recommendation for Block Cipher Modes of Operation: Methods and Techniques [NIST SP 800-38A]
**GCM:**- Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC [NIST SP 800-38D]
**CCM:**- Recommendation for Block Cipher Modes of Operation: The CCM Mode for Authentication and Confidentiality [NIST SP 800-38C]

**Asymetric Ciphers - Public Key Techniques:**

**RSA:**- PKCS #1: RSA Cryptography Specifications [RFC 3447]
**DSS:**- Digital Signature Standard (DSS) [FIPS 186-4]
**ECDSA:**- Elliptic Curve Digital Signature Algorithm [ECDSA]
**SRP:**- The SRP Authentication and Key Exchange System [RFC 2945]

**Note:**

Enabling FIPS mode will also disable algorithms and features.

The CRYPTO User's Guide has more information on FIPS, Engines and Algorithm Details like key lengths.

# DATA TYPES¶

## Ciphers¶

cipher()= cipher_no_iv() | cipher_iv() | cipher_aead()

cipher_no_iv()= aes_128_ecb | aes_192_ecb | aes_256_ecb | aes_ecb | blowfish_ecb | des_ecb | rc4

cipher_iv()= aes_128_cbc | aes_192_cbc | aes_256_cbc | aes_cbc | aes_128_cfb128 | aes_192_cfb128 | aes_256_cfb128 | aes_cfb128 | aes_128_cfb8 | aes_192_cfb8 | aes_256_cfb8 | aes_cfb8 | aes_128_ctr | aes_192_ctr | aes_256_ctr | aes_ctr | blowfish_cbc | blowfish_cfb64 | blowfish_ofb64 | chacha20 | des_ede3_cbc | des_ede3_cfb | des_cbc | des_cfb | rc2_cbc

cipher_aead()= aes_128_ccm | aes_192_ccm | aes_256_ccm | aes_ccm | aes_128_gcm | aes_192_gcm | aes_256_gcm | aes_gcm | chacha20_poly1305

Ciphers known by the CRYPTO application.

Note that this list might be reduced if the underlying libcrypto does not support all of them.

crypto_opts()= boolean() | [crypto_opt()]

crypto_opt()= {encrypt, boolean()} | {padding, padding()}

Selects encryption (*{encrypt,true}*) or decryption
(*{encrypt,false}*).

padding()= cryptolib_padding() | otp_padding()

This option handles padding in the last block. If not set, no padding is done and any bytes in the last unfilled block is silently discarded.

cryptolib_padding()= none | pkcs_padding

The *cryptolib_padding* are paddings that may be present in
the underlying cryptolib linked to the Erlang/OTP crypto app.

For OpenSSL, see the OpenSSL documentation. and find
*EVP_CIPHER_CTX_set_padding()* in cryptolib for your linked
version.

otp_padding()= zero | random

Erlang/OTP adds a either padding of zeroes or padding with random bytes.

## Digests and hash¶

hash_algorithm()= sha1() | sha2() | sha3() | blake2() | ripemd160 | compatibility_only_hash()

hmac_hash_algorithm()= sha1() | sha2() | sha3() | compatibility_only_hash()

cmac_cipher_algorithm()= aes_128_cbc | aes_192_cbc | aes_256_cbc | aes_cbc | aes_128_cfb128 | aes_192_cfb128 | aes_256_cfb128 | aes_cfb128 | aes_128_cfb8 | aes_192_cfb8 | aes_256_cfb8 | aes_cfb8 | blowfish_cbc | des_cbc | des_ede3_cbc | rc2_cbc

rsa_digest_type()= sha1() | sha2() | md5 | ripemd160

dss_digest_type()= sha1() | sha2()

ecdsa_digest_type()= sha1() | sha2()

sha1()= sha

sha2()= sha224 | sha256 | sha384 | sha512

sha3()= sha3_224 | sha3_256 | sha3_384 | sha3_512

blake2()= blake2b | blake2s

compatibility_only_hash()= md5 | md4

The *compatibility_only_hash()* algorithms are recommended
only for compatibility with existing applications.

## Elliptic Curves¶

ec_named_curve()= brainpoolP160r1 | brainpoolP160t1 | brainpoolP192r1 | brainpoolP192t1 | brainpoolP224r1 | brainpoolP224t1 | brainpoolP256r1 | brainpoolP256t1 | brainpoolP320r1 | brainpoolP320t1 | brainpoolP384r1 | brainpoolP384t1 | brainpoolP512r1 | brainpoolP512t1 | c2pnb163v1 | c2pnb163v2 | c2pnb163v3 | c2pnb176v1 | c2pnb208w1 | c2pnb272w1 | c2pnb304w1 | c2pnb368w1 | c2tnb191v1 | c2tnb191v2 | c2tnb191v3 | c2tnb239v1 | c2tnb239v2 | c2tnb239v3 | c2tnb359v1 | c2tnb431r1 | ipsec3 | ipsec4 | prime192v1 | prime192v2 | prime192v3 | prime239v1 | prime239v2 | prime239v3 | prime256v1 | secp112r1 | secp112r2 | secp128r1 | secp128r2 | secp160k1 | secp160r1 | secp160r2 | secp192k1 | secp192r1 | secp224k1 | secp224r1 | secp256k1 | secp256r1 | secp384r1 | secp521r1 | sect113r1 | sect113r2 | sect131r1 | sect131r2 | sect163k1 | sect163r1 | sect163r2 | sect193r1 | sect193r2 | sect233k1 | sect233r1 | sect239k1 | sect283k1 | sect283r1 | sect409k1 | sect409r1 | sect571k1 | sect571r1 | wtls1 | wtls10 | wtls11 | wtls12 | wtls3 | wtls4 | wtls5 | wtls6 | wtls7 | wtls8 | wtls9

edwards_curve_dh()= x25519 | x448

edwards_curve_ed()= ed25519 | ed448

Note that some curves are disabled if FIPS is enabled.

ec_explicit_curve()= {Field :: ec_field(), Curve :: ec_curve(), BasePoint :: binary(), Order :: binary(), CoFactor :: none | binary()}

ec_field()= ec_prime_field() | ec_characteristic_two_field()

ec_curve()= {A :: binary(), B :: binary(), Seed :: none | binary()}

Parametric curve definition.

ec_prime_field()= {prime_field, Prime :: integer()}

ec_characteristic_two_field()= {characteristic_two_field, M :: integer(), Basis :: ec_basis()}

ec_basis()= {tpbasis, K :: integer() >= 0} | {ppbasis, K1 :: integer() >= 0, K2 :: integer() >= 0, K3 :: integer() >= 0} | onbasis

Curve definition details.

## Keys¶

key_integer()= integer() | binary()

Always *binary()* when used as return value

## Public/Private Keys¶

rsa_public()= [key_integer()]

rsa_private()= [key_integer()]

rsa_params()= {ModulusSizeInBits :: integer(), PublicExponent :: key_integer()}

rsa_public() = [E, N]

rsa_private() = [E, N, D] | [E, N, D, P1, P2, E1, E2, C]

Where E is the public exponent, N is public modulus and D is the private exponent. The longer key format contains redundant information that will make the calculation faster. P1 and P2 are first and second prime factors. E1 and E2 are first and second exponents. C is the CRT coefficient. The terminology is taken from RFC 3447.

dss_public()= [key_integer()]

dss_private()= [key_integer()]

dss_public() = [P, Q, G, Y]

Where P, Q and G are the dss parameters and Y is the public key.

dss_private() = [P, Q, G, X]

Where P, Q and G are the dss parameters and X is the private key.

ecdsa_public()= key_integer()

ecdsa_private()= key_integer()

ecdsa_params()= ec_named_curve() | ec_explicit_curve()

eddsa_public()= key_integer()

eddsa_private()= key_integer()

eddsa_params()= edwards_curve_ed()

srp_public()= key_integer()

srp_private()= key_integer()

srp_public() = key_integer()

Where is *A* or *B* from SRP design

srp_private() = key_integer()

Where is *a* or *b* from SRP design

srp_gen_params()= {user, srp_user_gen_params()} | {host, srp_host_gen_params()}

srp_comp_params()= {user, srp_user_comp_params()} | {host, srp_host_comp_params()}

srp_user_gen_params() = [DerivedKey::binary(), Prime::binary(), Generator::binary(), Version::atom()]

srp_host_gen_params() = [Verifier::binary(), Prime::binary(), Version::atom() ]

srp_user_comp_params() = [DerivedKey::binary(), Prime::binary(), Generator::binary(), Version::atom() | ScramblerArg::list()]

srp_host_comp_params() = [Verifier::binary(), Prime::binary(), Version::atom() | ScramblerArg::list()]

Where Verifier is *v*, Generator is *g* and Prime is*
N*, DerivedKey is *X*, and Scrambler is *u* (optional will be
generated if not provided) from SRP design Version = '3' | '6' | '6a'

## Public Key Ciphers¶

pk_encrypt_decrypt_algs()= rsa

Algorithms for public key encrypt/decrypt. Only RSA is supported.

pk_encrypt_decrypt_opts()= [rsa_opt()] | rsa_compat_opts()

rsa_opt()= {rsa_padding, rsa_padding()} | {signature_md, atom()} | {rsa_mgf1_md, sha} | {rsa_oaep_label, binary()} | {rsa_oaep_md, sha}

rsa_padding()= rsa_pkcs1_padding | rsa_pkcs1_oaep_padding | rsa_sslv23_padding | rsa_x931_padding | rsa_no_padding

Options for public key encrypt/decrypt. Only RSA is supported.

**Warning:**

The RSA options are experimental.

The exact set of options and there syntax *may* be changed
without prior notice.

rsa_compat_opts()= [{rsa_pad, rsa_padding()}] | rsa_padding()

Those option forms are kept only for compatibility and should not be used in new code.

## Public Key Sign and Verify¶

pk_sign_verify_algs()= rsa | dss | ecdsa | eddsa

Algorithms for sign and verify.

pk_sign_verify_opts()= [rsa_sign_verify_opt()]

rsa_sign_verify_opt()= {rsa_padding, rsa_sign_verify_padding()} | {rsa_pss_saltlen, integer()} | {rsa_mgf1_md, sha2()}

rsa_sign_verify_padding()= rsa_pkcs1_padding | rsa_pkcs1_pss_padding | rsa_x931_padding | rsa_no_padding

Options for sign and verify.

**Warning:**

The RSA options are experimental.

The exact set of options and there syntax *may* be changed
without prior notice.

## Diffie-Hellman Keys and parameters¶

dh_public()= key_integer()

dh_private()= key_integer()

dh_params()= [key_integer()]

dh_params() = [P, G] | [P, G, PrivateKeyBitLength]

ecdh_public()= key_integer()

ecdh_private()= key_integer()

ecdh_params()= ec_named_curve() | edwards_curve_dh() | ec_explicit_curve()

## Types for Engines¶

engine_key_ref()= #{engine := engine_ref(), key_id := key_id(), password => password(), term() => term()}

engine_ref()= term()

The result of a call to engine_load/3.

key_id()= string() | binary()

Identifies the key to be used. The format depends on the loaded
engine. It is passed to the *ENGINE_load_(private|public)_key*
functions in libcrypto.

password()= string() | binary()

The password of the key stored in an engine.

engine_method_type()= engine_method_rsa | engine_method_dsa | engine_method_dh | engine_method_rand | engine_method_ecdh | engine_method_ecdsa | engine_method_ciphers | engine_method_digests | engine_method_store | engine_method_pkey_meths | engine_method_pkey_asn1_meths | engine_method_ec

engine_cmnd()= {unicode:chardata(), unicode:chardata()}

Pre and Post commands for engine_load/3 and /4.

## Internal data types¶

crypto_state()

hash_state()

mac_state()

Contexts with an internal state that should not be manipulated but passed between function calls.

## Error types¶

run_time_error()= any()

The exception *error:badarg* signifies that one or more
arguments are of wrong data type, or are otherwise badly formed.

The exception *error:notsup* signifies that the algorithm is
known but is not supported by current underlying libcrypto or explicitly
disabled when building that.

For a list of supported algorithms, see supports(ciphers).

descriptive_error()= any()

This is a more developed variant of the older run_time_error().

The exception is:

{Tag, {C_FileName,LineNumber}, Description} Tag = badarg | notsup | error C_FileName = string() LineNumber = integer() Description = string()

It is like the older type an exception of the *error* class.
In addition they contain a descriptive text in English. That text is
targeted to a developer. Examples are "Bad key size" or
"Cipher id is not an atom".

The exception tags are:

*badarg*:- Signifies that one or more arguments are of wrong data type or are otherwise badly formed.
*notsup*:- Signifies that the algorithm is known but is not supported by current underlying libcrypto or explicitly disabled when building that one.
*error*:- An error condition that should not occur, for example a memory allocation failed or the underlying cryptolib returned an error code, for example "Can't initialize context, step 1". Those text usually needs searching the C-code to be understood.

To catch the exception, use for example:

try crypto:crypto_init(Ciph, Key, IV, true) catch error:{Tag, {C_FileName,LineNumber}, Description} -> do_something(......) ..... end

# EXPORTS¶

crypto_init(Cipher, Key, FlagOrOptions) ->State | descriptive_error()

Types:

Key = iodata()

FlagOrOptions = crypto_opts() | boolean()

State = crypto_state()

Equivalent to the call *crypto_init(Cipher, Key,
<<>>, FlagOrOptions)*. It is intended for ciphers without an
IV (nounce).

crypto_init(Cipher, Key, IV, FlagOrOptions) ->State | descriptive_error()

Types:

Key = IV = iodata()

FlagOrOptions = crypto_opts()

State = crypto_state()

Initializes a series of encryptions or decryptions and creates an internal state with a reference that is returned.

If *IV = <<>>*, no IV is used. This is intended
for ciphers without an IV (nounce). See crypto_init/3.

If *IV = undefined*, the IV must be added by calls to
crypto_dyn_iv_update/3. This is intended for cases where the IV (nounce)
need to be changed for each encryption and decryption. See
crypto_dyn_iv_init/3.

The actual encryption or decryption is done by crypto_update/2 (or crypto_dyn_iv_update/3 ).

For encryption, set the *FlagOrOptions* to *true* or
*[{encrypt,true}]*. For decryption, set it to *false* or
*[{encrypt,false}]*.

Padding could be enabled with the option {padding,Padding}. The
cryptolib_padding enables *pkcs_padding* or no padding (*none*).
The paddings *zero* or *random* fills the last part of the last
block with zeroes or random bytes. If the last block is already full,
nothing is added.

In decryption, the cryptolib_padding removes such padding, if present. The otp_padding is not removed - it has to be done elsewhere.

If padding is *{padding,none}* or not specifed and the total
data from all subsequent crypto_updates does not fill the last block fully,
that last data is lost. In case of *{padding,none}* there will be an
error in this case. If padding is not specified, the bytes of the unfilled
block is silently discarded.

The actual padding is performed by crypto_final/1.

For blocksizes call cipher_info/1.

See examples in the User's Guide.

crypto_update(State, Data) -> Result | descriptive_error()

Types:

Data = iodata()

Result = binary()

It does an actual crypto operation on a part of the full text. If
the part is less than a number of full blocks, only the full blocks
(possibly none) are encrypted or decrypted and the remaining bytes are saved
to the next *crypto_update* operation. The *State* should be
created with crypto_init/3 or crypto_init/4.

See examples in the User's Guide.

crypto_dyn_iv_init(Cipher, Key, FlagOrOptions) ->State | descriptive_error()

Types:

Key = iodata()

FlagOrOptions = crypto_opts() | boolean()

State = crypto_state()

Initializes a series of encryptions or decryptions where the IV is provided later. The actual encryption or decryption is done by crypto_dyn_iv_update/3.

The function is equivalent to *crypto_init(Cipher, Key,
undefined, FlagOrOptions)*.

crypto_final(State) -> FinalResult | descriptive_error()

Types:

FinalResult = binary()

Finalizes a series of encryptions or decryptions and delivers the final bytes of the final block. The data returned from this function may be empty if no padding was enabled in crypto_init/3,4 or crypto_dyn_iv_init/3.

crypto_get_data(State) -> Result

Types:

Result = map()

Returns information about the State in the argument. The information is the form of a map, which currently contains at least:

*size*:- The number of bytes encrypted or decrypted so far.
*padding_size*:- After a call to crypto_final/1 it contains the number of bytes padded. Otherwise 0.
*padding_type*:- The type of the padding as provided in the call ot crypto_init/3,4.
*encrypt*:- Is
*true*if encryption is performed. It is*false*otherwise.

crypto_dyn_iv_update(State, Data, IV) ->Result | descriptive_error()

Types:

Data = IV = iodata()

Result = binary()

Do an actual crypto operation on a part of the full text and the
IV is supplied for each part. The *State* should be created with
crypto_dyn_iv_init/3.

crypto_one_time(Cipher, Key, Data, FlagOrOptions) ->Result | descriptive_error()

Types:

Key = Data = iodata()

FlagOrOptions = crypto_opts() | boolean()

Result = binary()

As crypto_one_time/5 but for ciphers without IVs.

crypto_one_time(Cipher, Key, IV, Data, FlagOrOptions) ->Result | descriptive_error()

Types:

Key = IV = Data = iodata()

FlagOrOptions = crypto_opts() | boolean()

Result = binary()

Do a complete encrypt or decrypt of the full text in the argument
*Data*.

For encryption, set the *FlagOrOptions* to *true*. For
decryption, set it to *false*. For setting other options, see
crypto_init/4.

See examples in the User's Guide.

crypto_one_time_aead(Cipher, Key, IV, InText, AAD,EncFlag :: true) ->Result | descriptive_error()

crypto_one_time_aead(Cipher, Key, IV, InText, AAD, TagOrTagLength,EncFlag) ->Result | descriptive_error()

Types:

Key = IV = InText = AAD = iodata()

TagOrTagLength = EncryptTagLength | DecryptTag

EncryptTagLength = integer() >= 0

DecryptTag = iodata()

EncFlag = boolean()

Result = EncryptResult | DecryptResult

EncryptResult = {OutCryptoText, OutTag}

DecryptResult = OutPlainText | error

OutCryptoText = OutTag = OutPlainText = binary()

Do a complete encrypt or decrypt with an AEAD cipher of the full text.

For encryption, set the *EncryptFlag* to *true* and set
the *TagOrTagLength* to the wanted size (in bytes) of the tag, that is,
the tag length. If the default length is wanted, the *crypto_aead/6*
form may be used.

For decryption, set the *EncryptFlag* to *false* and put
the tag to be checked in the argument *TagOrTagLength*.

See examples in the User's Guide.

supports(Type) -> Support

Types:

Support = Hashs | Ciphers | PKs | Macs | Curves | RSAopts

Hashs = [sha1() | sha2() | sha3() | blake2() | ripemd160 | compatibility_only_hash()]

Ciphers = [cipher()]

PKs = [rsa | dss | ecdsa | dh | ecdh | eddh | ec_gf2m]

Macs = [hmac | cmac | poly1305]

Curves = [ec_named_curve() | edwards_curve_dh() | edwards_curve_ed()]

RSAopts = [rsa_sign_verify_opt() | rsa_opt()]

Can be used to determine which crypto algorithms that are supported by the underlying libcrypto library

See hash_info/1 and cipher_info/1 for information about the hash and cipher algorithms.

mac(Type :: poly1305, Key, Data) -> Mac | descriptive_error()

Types:

Mac = binary()

Short for mac(Type, undefined, Key, Data).

mac(Type, SubType, Key, Data) -> Mac | descriptive_error()

Types:

SubType = hmac_hash_algorithm() | cmac_cipher_algorithm() | undefined

Key = Data = iodata()

Mac = binary()

Computes a MAC (Message Authentication Code) of type *Type*
from *Data*.

*SubType* depends on the MAC *Type*:

- *
- For
*hmac*it is a hash algorithm, see Algorithm Details in the User's Guide. - *
- For
*cmac*it is a cipher suitable for cmac, see Algorithm Details in the User's Guide. - *
- For
*poly1305*it should be set to*undefined*or the mac/2 function could be used instead, see Algorithm Details in the User's Guide.

*Key* is the authentication key with a length according to
the *Type* and *SubType*. The key length could be found with the
hash_info/1 (*hmac*) for and cipher_info/1 (*cmac*) functions. For
*poly1305* the key length is 32 bytes. Note that the cryptographic
quality of the key is not checked.

The *Mac* result will have a default length depending on the
*Type* and *SubType*. To set a shorter length, use macN/4 or
macN/5 instead. The default length is documented in Algorithm Details in the
User's Guide.

macN(Type :: poly1305, Key, Data, MacLength) ->Mac | descriptive_error()

Types:

Mac = binary()

MacLength = integer() >= 1

Short for macN(Type, undefined, Key, Data, MacLength).

macN(Type, SubType, Key, Data, MacLength) ->Mac | descriptive_error()

Types:

SubType = hmac_hash_algorithm() | cmac_cipher_algorithm() | undefined

Key = Data = iodata()

Mac = binary()

MacLength = integer() >= 1

Computes a MAC (Message Authentication Code) as mac/3 and mac/4
but *MacLength* will limit the size of the resultant *Mac* to at
most *MacLength* bytes. Note that if *MacLength* is greater than
the actual number of bytes returned from the underlying hash, the returned
hash will have that shorter length instead.

The max *MacLength* is documented in Algorithm Details in the
User's Guide.

mac_init(Type :: poly1305, Key) -> State | descriptive_error()

Types:

State = mac_state()

Short for mac_init(Type, undefined, Key).

mac_init(Type, SubType, Key) -> State | descriptive_error()

Types:

SubType = hmac_hash_algorithm() | cmac_cipher_algorithm() | undefined

Key = iodata()

State = mac_state()

Initializes the context for streaming MAC operations.

*Type* determines which mac algorithm to use in the MAC
operation.

*SubType* depends on the MAC *Type*:

- *
- For
*hmac*it is a hash algorithm, see Algorithm Details in the User's Guide. - *
- For
*cmac*it is a cipher suitable for cmac, see Algorithm Details in the User's Guide. - *
- For
*poly1305*it should be set to*undefined*or the mac/2 function could be used instead, see Algorithm Details in the User's Guide.

*Key* is the authentication key with a length according to
the *Type* and *SubType*. The key length could be found with the
hash_info/1 (*hmac*) for and cipher_info/1 (*cmac*) functions. For
*poly1305* the key length is 32 bytes. Note that the cryptographic
quality of the key is not checked.

The returned *State* should be used in one or more subsequent
calls to mac_update/2. The MAC value is finally returned by calling
mac_final/1 or mac_finalN/2.

See examples in the User's Guide.

mac_update(State0, Data) -> State | descriptive_error()

Types:

State0 = State = mac_state()

Updates the MAC represented by *State0* using the given
*Data* which could be of any length.

The *State0* is the State value originally from a MAC init
function, that is mac_init/2, mac_init/3 or a previous call of
*mac_update/2*. The value *State0* is returned unchanged by the
function as *State*.

mac_final(State) -> Mac | descriptive_error()

Types:

Mac = binary()

Finalizes the MAC operation referenced by *State*. The
*Mac* result will have a default length depending on the *Type*
and *SubType* in the mac_init/2,3 call. To set a shorter length, use
mac_finalN/2 instead. The default length is documented in Algorithm Details
in the User's Guide.

mac_finalN(State, MacLength) -> Mac | descriptive_error()

Types:

MacLength = integer() >= 1

Mac = binary()

Finalizes the MAC operation referenced by *State*.

*Mac* will be a binary with at most *MacLength* bytes.
Note that if *MacLength* is greater than the actual number of bytes
returned from the underlying hash, the returned hash will have that shorter
length instead.

The max *MacLength* is documented in Algorithm Details in the
User's Guide.

bytes_to_integer(Bin :: binary()) -> integer()

Convert binary representation, of an integer, to an Erlang integer.

compute_key(Type, OthersPublicKey, MyPrivateKey, Params) ->SharedSecret

Types:

SharedSecret = binary()

OthersPublicKey = dh_public() | ecdh_public() | srp_public()

MyPrivateKey = dh_private() | ecdh_private() | {srp_public(), srp_private()}

Params = dh_params() | ecdh_params() | srp_comp_params()

Computes the shared secret from the private key and the other party's public key. See also public_key:compute_key/2

exor(Bin1 :: iodata(), Bin2 :: iodata()) -> binary()

Performs bit-wise XOR (exclusive or) on the data supplied.

generate_key(Type, Params) -> {PublicKey, PrivKeyOut}

generate_key(Type, Params, PrivKeyIn) -> {PublicKey, PrivKeyOut}

Types:

PublicKey = dh_public() | ecdh_public() | rsa_public() | srp_public()

PrivKeyIn = undefined | dh_private() | ecdh_private() | rsa_private() | {srp_public(), srp_private()}

PrivKeyOut = dh_private() | ecdh_private() | rsa_private() | {srp_public(), srp_private()}

Params = dh_params() | ecdh_params() | eddsa_params() | rsa_params() | srp_comp_params()

Generates a public key of type *Type*. See also
public_key:generate_key/1. May raise exception:

- *
*error:badarg*: an argument is of wrong type or has an illegal value,- *
*error:low_entropy*: the random generator failed due to lack of secure "randomness",- *
*error:computation_failed*: the computation fails of another reason than*low_entropy*.

**Note:**

*error:notsup*.

hash(Type, Data) -> Digest

Types:

Data = iodata()

Digest = binary()

Computes a message digest of type *Type* from
*Data*.

May raise exception *error:notsup* in case the chosen
*Type* is not supported by the underlying libcrypto implementation.

hash_init(Type) -> State

Types:

State = hash_state()

Initializes the context for streaming hash operations. *Type*
determines which digest to use. The returned context should be used as
argument to hash_update.

May raise exception *error:notsup* in case the chosen
*Type* is not supported by the underlying libcrypto implementation.

hash_update(State, Data) -> NewState

Types:

Data = iodata()

Updates the digest represented by *Context* using the given
*Data*. *Context* must have been generated using hash_init or a
previous call to this function. *Data* can be any length.
*NewContext* must be passed into the next call to *hash_update* or
hash_final.

hash_final(State) -> Digest

Types:

Digest = binary()

Finalizes the hash operation referenced by *Context* returned
from a previous call to hash_update. The size of *Digest* is determined
by the type of hash function used to generate it.

info_fips() -> not_supported | not_enabled | enabled

Provides information about the FIPS operating status of crypto and
the underlying libcrypto library. If crypto was built with FIPS support this
can be either *enabled* (when running in FIPS mode) or
*not_enabled*. For other builds this value is always
*not_supported*.

See enable_fips_mode/1 about how to enable FIPS mode.

**Warning:**

*error:notsup*. Check supports(ciphers) that in FIPS mode returns the restricted list of available algorithms.

enable_fips_mode(Enable) -> Result

Types:

Enables (*Enable = true*) or disables (*Enable = false*)
FIPS mode. Returns *true* if the operation was successful or
*false* otherwise.

Note that to enable FIPS mode succesfully, OTP must be built with
the configure option *--enable-fips*, and the underlying libcrypto must
also support FIPS.

See also info_fips/0.

info_lib() -> [{Name, VerNum, VerStr}]

Types:

VerNum = integer()

VerStr = binary()

Provides the name and version of the libraries used by crypto.

*Name* is the name of the library. *VerNum* is the
numeric version according to the library's own versioning scheme.
*VerStr* contains a text variant of the version.

> info_lib(). [{<<"OpenSSL">>,269484095,<<"OpenSSL 1.1.0c 10 Nov 2016"">>}]

**Note:**

*numeric version*represents the version of the OpenSSL

*header files*(

*openssl/opensslv.h*) used when crypto was compiled. The text variant represents the libcrypto library used at runtime. In earlier OTP versions both numeric and text was taken from the library.

hash_info(Type) -> Result | run_time_error()

Types:

Result = #{size := integer(), block_size := integer(), type := integer()}

Provides a map with information about block_size, size and possibly other properties of the hash algorithm in question.

For a list of supported hash algorithms, see supports(hashs).

cipher_info(Type) -> Result | run_time_error()

Types:

Result = #{key_length := integer(), iv_length := integer(), block_size := integer(), mode := CipherModes, type := undefined | integer(), prop_aead := boolean()}

CipherModes = undefined | cbc_mode | ccm_mode | cfb_mode | ctr_mode | ecb_mode | gcm_mode | ige_mode | ocb_mode | ofb_mode | wrap_mode | xts_mode

Provides a map with information about block_size, key_length, iv_length, aead support and possibly other properties of the cipher algorithm in question.

**Note:**

*aes_cbc*,

*aes_cfb8*,

*aes_cfb128*,

*aes_ctr*,

*aes_ecb*,

*aes_gcm*and

*aes_ccm*has no keylength in the

*Type*as opposed to for example

*aes_128_ctr*. They adapt to the length of the key provided in the encrypt and decrypt function. Therefor it is impossible to return a valid keylength in the map.

Always use a *Type* with an explicit key length,

For a list of supported cipher algorithms, see supports(ciphers).

mod_pow(N, P, M) -> Result

Types:

Result = binary() | error

Computes the function *N^P mod M*.

private_decrypt(Algorithm, CipherText, PrivateKey, Options) ->PlainText

Types:

CipherText = binary()

PrivateKey = rsa_private() | engine_key_ref()

Options = pk_encrypt_decrypt_opts()

PlainText = binary()

Decrypts the *CipherText*, encrypted with public_encrypt/4
(or equivalent function) using the *PrivateKey*, and returns the
plaintext (message digest). This is a low level signature verification
operation used for instance by older versions of the SSL protocol. See also
public_key:decrypt_private/[2,3]

private_encrypt(Algorithm, PlainText, PrivateKey, Options) ->CipherText

Types:

PlainText = binary()

PrivateKey = rsa_private() | engine_key_ref()

Options = pk_encrypt_decrypt_opts()

CipherText = binary()

Encrypts the *PlainText* using the *PrivateKey* and
returns the ciphertext. This is a low level signature operation used for
instance by older versions of the SSL protocol. See also
public_key:encrypt_private/[2,3]

public_decrypt(Algorithm, CipherText, PublicKey, Options) ->PlainText

Types:

CipherText = binary()

PublicKey = rsa_public() | engine_key_ref()

Options = pk_encrypt_decrypt_opts()

PlainText = binary()

Decrypts the *CipherText*, encrypted with
private_encrypt/4(or equivalent function) using the *PrivateKey*, and
returns the plaintext (message digest). This is a low level signature
verification operation used for instance by older versions of the SSL
protocol. See also public_key:decrypt_public/[2,3]

public_encrypt(Algorithm, PlainText, PublicKey, Options) ->CipherText

Types:

PlainText = binary()

PublicKey = rsa_public() | engine_key_ref()

Options = pk_encrypt_decrypt_opts()

CipherText = binary()

Encrypts the *PlainText* (message digest) using the
*PublicKey* and returns the *CipherText*. This is a low level
signature operation used for instance by older versions of the SSL protocol.
See also public_key:encrypt_public/[2,3]

rand_seed(Seed :: binary()) -> ok

Set the seed for PRNG to the given binary. This calls the
RAND_seed function from openssl. Only use this if the system you are running
on does not have enough "randomness" built in. Normally this is
when strong_rand_bytes/1 raises *error:low_entropy*

**rand_uniform(Lo, Hi) -> N**

Types:

Generate a random number *N, Lo =< N < Hi.* Uses the
*crypto* library pseudo-random number generator. *Hi* must be
larger than *Lo*.

start() -> ok | {error, Reason :: term()}

Equivalent to application:start(crypto).

stop() -> ok | {error, Reason :: term()}

Equivalent to application:stop(crypto).

strong_rand_bytes(N :: integer() >= 0) -> binary()

Generates N bytes randomly uniform 0..255, and returns the result
in a binary. Uses a cryptographically secure prng seeded and periodically
mixed with operating system provided entropy. By default this is the
*RAND_bytes* method from OpenSSL.

May raise exception *error:low_entropy* in case the random
generator failed due to lack of secure "randomness".

rand_seed() -> rand:state()

Creates state object for random number generation, in order to
generate cryptographically strong random numbers (based on OpenSSL's
*BN_rand_range*), and saves it in the process dictionary before
returning it as well. See also rand:seed/1 and rand_seed_s/0.

When using the state object from this function the rand functions
using it may raise exception *error:low_entropy* in case the random
generator failed due to lack of secure "randomness".

*Example*

_ = crypto:rand_seed(), _IntegerValue = rand:uniform(42), % [1; 42] _FloatValue = rand:uniform(). % [0.0; 1.0[

rand_seed_s() -> rand:state()

Creates state object for random number generation, in order to
generate cryptographically strongly random numbers (based on OpenSSL's
*BN_rand_range*). See also rand:seed_s/1.

When using the state object from this function the rand functions
using it may raise exception *error:low_entropy* in case the random
generator failed due to lack of secure "randomness".

**Note:**

The only supported usage is to generate one distinct random sequence from this start state.

**rand_seed_alg(Alg) -> rand:state()**

Types:

Creates state object for random number generation, in order to generate cryptographically strong random numbers, and saves it in the process dictionary before returning it as well. See also rand:seed/1 and rand_seed_alg_s/1.

When using the state object from this function the rand functions
using it may raise exception *error:low_entropy* in case the random
generator failed due to lack of secure "randomness".

*Example*

_ = crypto:rand_seed_alg(crypto_cache), _IntegerValue = rand:uniform(42), % [1; 42] _FloatValue = rand:uniform(). % [0.0; 1.0[

**rand_seed_alg(Alg, Seed) -> rand:state()**

Types:

Creates a state object for random number generation, in order to generate cryptographically unpredictable random numbers, and saves it in the process dictionary before returning it as well. See also rand_seed_alg_s/2.

*Example*

_ = crypto:rand_seed_alg(crypto_aes, "my seed"), IntegerValue = rand:uniform(42), % [1; 42] FloatValue = rand:uniform(), % [0.0; 1.0[ _ = crypto:rand_seed_alg(crypto_aes, "my seed"), IntegerValue = rand:uniform(42), % Same values FloatValue = rand:uniform(). % again

**rand_seed_alg_s(Alg) -> rand:state()**

Types:

Creates state object for random number generation, in order to generate cryptographically strongly random numbers. See also rand:seed_s/1.

If *Alg* is *crypto* this function behaves exactly like
rand_seed_s/0.

If *Alg* is *crypto_cache* this function fetches random
data with OpenSSL's *RAND_bytes* and caches it for speed using an
internal word size of 56 bits that makes calculations fast on 64 bit
machines.

*error:low_entropy* in case the random
generator failed due to lack of secure "randomness".

The cache size can be changed from its default value using the
crypto app's configuration parameter *rand_cache_size*.

When using the state object from this function the rand functions
using it may throw exception *low_entropy* in case the random generator
failed due to lack of secure "randomness".

**Note:**

In fact since random data is cached some numbers may get reproduced if you try, but this is unpredictable.

The only supported usage is to generate one distinct random sequence from this start state.

**rand_seed_alg_s(Alg, Seed) -> rand:state()**

Types:

Creates a state object for random number generation, in order to generate cryptographically unpredictable random numbers. See also rand_seed_alg/1.

To get a long period the Xoroshiro928 generator from the rand module is used as a counter (with period 2^928 - 1) and the generator states are scrambled through AES to create 58-bit pseudo random values.

The result should be statistically completely unpredictable random values, since the scrambling is cryptographically strong and the period is ridiculously long. But the generated numbers are not to be regarded as cryptographically strong since there is no re-keying schedule.

- *
- If you need cryptographically strong random numbers use rand_seed_alg_s/1
with
*Alg =:= crypto*or*Alg =:= crypto_cache*. - *
- If you need to be able to repeat the sequence use this function.
- *
- If you do not need the statistical quality of this function, there are faster algorithms in the rand module.

Thanks to the used generator the state object supports the
*rand:jump/0,1* function with distance 2^512.

Numbers are generated in batches and cached for speed reasons. The
cache size can be changed from its default value using the crypto app's
configuration parameter *rand_cache_size*.

ec_curves() -> [EllipticCurve]

Types:

Can be used to determine which named elliptic curves are supported.

ec_curve(CurveName) -> ExplicitCurve

Types:

ExplicitCurve = ec_explicit_curve()

Return the defining parameters of a elliptic curve.

sign(Algorithm, DigestType, Msg, Key) -> Signature

sign(Algorithm, DigestType, Msg, Key, Options) -> Signature

Types:

DigestType = rsa_digest_type() | dss_digest_type() | ecdsa_digest_type() | none

Msg = iodata() | {digest, iodata()}

Key = rsa_private() | dss_private() | [ecdsa_private() | ecdsa_params()] | [eddsa_private() | eddsa_params()] | engine_key_ref()

Options = pk_sign_verify_opts()

Signature = binary()

Creates a digital signature.

The msg is either the binary "cleartext" data to be signed or it is the hashed value of "cleartext" i.e. the digest (plaintext).

Algorithm *dss* can only be used together with digest type
*sha*.

See also public_key:sign/3.

verify(Algorithm, DigestType, Msg, Signature, Key) -> Result

verify(Algorithm, DigestType, Msg, Signature, Key, Options) ->Result

Types:

DigestType = rsa_digest_type() | dss_digest_type() | ecdsa_digest_type() | none

Msg = iodata() | {digest, iodata()}

Signature = binary()

Key = rsa_public() | dss_public() | [ecdsa_public() | ecdsa_params()] | [eddsa_public() | eddsa_params()] | engine_key_ref()

Options = pk_sign_verify_opts()

Result = boolean()

Verifies a digital signature

The msg is either the binary "cleartext" data to be signed or it is the hashed value of "cleartext" i.e. the digest (plaintext).

Algorithm *dss* can only be used together with digest type
*sha*.

See also public_key:verify/4.

# ENGINE API¶

# EXPORTS¶

privkey_to_pubkey(Type, EnginePrivateKeyRef) -> PublicKey

Types:

EnginePrivateKeyRef = engine_key_ref()

PublicKey = rsa_public() | dss_public()

Fetches the corresponding public key from a private key stored in an Engine. The key must be of the type indicated by the Type parameter.

engine_get_all_methods() -> Result

Types:

Returns a list of all possible engine methods.

May raise exception *error:notsup* in case there is no engine
support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

engine_load(EngineId, PreCmds, PostCmds) -> Result

Types:

PreCmds = PostCmds = [engine_cmnd()]

Result = {ok, Engine :: engine_ref()} | {error, Reason :: term()}

Loads the OpenSSL engine given by *EngineId* if it is
available and then returns ok and an engine handle. This function is the
same as calling *engine_load/4* with *EngineMethods* set to a list
of all the possible methods. An error tuple is returned if the engine can't
be loaded.

The function raises a *error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

engine_load(EngineId, PreCmds, PostCmds, EngineMethods) -> Result

Types:

PreCmds = PostCmds = [engine_cmnd()]

EngineMethods = [engine_method_type()]

Result = {ok, Engine :: engine_ref()} | {error, Reason :: term()}

Loads the OpenSSL engine given by *EngineId* if it is
available and then returns ok and an engine handle. An error tuple is
returned if the engine can't be loaded.

The function raises a *error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

engine_unload(Engine) -> Result

Types:

Result = ok | {error, Reason :: term()}

Unloads the OpenSSL engine given by *Engine*. An error tuple
is returned if the engine can't be unloaded.

The function raises a *error:badarg* if the parameter is in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

engine_by_id(EngineId) -> Result

Types:

Result = {ok, Engine :: engine_ref()} | {error, Reason :: term()}

Get a reference to an already loaded engine with *EngineId*.
An error tuple is returned if the engine can't be unloaded.

The function raises a *error:badarg* if the parameter is in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

engine_ctrl_cmd_string(Engine, CmdName, CmdArg) -> Result

Types:

CmdName = CmdArg = unicode:chardata()

Result = ok | {error, Reason :: term()}

Sends ctrl commands to the OpenSSL engine given by *Engine*.
This function is the same as calling *engine_ctrl_cmd_string/4* with
*Optional* set to *false*.

The function raises a *error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_ctrl_cmd_string(Engine, CmdName, CmdArg, Optional) ->Result

Types:

CmdName = CmdArg = unicode:chardata()

Optional = boolean()

Result = ok | {error, Reason :: term()}

Sends ctrl commands to the OpenSSL engine given by *Engine*.
*Optional* is a boolean argument that can relax the semantics of the
function. If set to *true* it will only return failure if the ENGINE
supported the given command name but failed while executing it, if the
ENGINE doesn't support the command name it will simply return success
without doing anything. In this case we assume the user is only supplying
commands specific to the given ENGINE so we set this to *false*.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_add(Engine) -> Result

Types:

Result = ok | {error, Reason :: term()}

Add the engine to OpenSSL's internal list.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_remove(Engine) -> Result

Types:

Result = ok | {error, Reason :: term()}

Remove the engine from OpenSSL's internal list.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_get_id(Engine) -> EngineId

Types:

EngineId = unicode:chardata()

Return the ID for the engine, or an empty binary if there is no id set.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_get_name(Engine) -> EngineName

Types:

EngineName = unicode:chardata()

Return the name (eg a description) for the engine, or an empty binary if there is no name set.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

engine_list() -> Result

Types:

List the id's of all engines in OpenSSL's internal list.

It may also raise the exception *error:notsup* in case there
is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

May raise exception *error:notsup* in case engine
functionality is not supported by the underlying OpenSSL implementation.

ensure_engine_loaded(EngineId, LibPath) -> Result

Types:

Result = {ok, Engine :: engine_ref()} | {error, Reason :: term()}

Loads the OpenSSL engine given by *EngineId* and the path to
the dynamic library implementing the engine. This function is the same as
calling *ensure_engine_loaded/3* with *EngineMethods* set to a
list of all the possible methods. An error tuple is returned if the engine
can't be loaded.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

ensure_engine_loaded(EngineId, LibPath, EngineMethods) -> Result

Types:

EngineMethods = [engine_method_type()]

Result = {ok, Engine :: engine_ref()} | {error, Reason :: term()}

Loads the OpenSSL engine given by *EngineId* and the path to
the dynamic library implementing the engine. This function differs from the
normal engine_load in that sense it also add the engine id to the internal
list in OpenSSL. Then in the following calls to the function it just fetch
the reference to the engine instead of loading it again. An error tuple is
returned if the engine can't be loaded.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

ensure_engine_unloaded(Engine) -> Result

Types:

Result = ok | {error, Reason :: term()}

Unloads an engine loaded with the *ensure_engine_loaded*
function. It both removes the label from the OpenSSL internal engine list
and unloads the engine. This function is the same as calling
*ensure_engine_unloaded/2* with *EngineMethods* set to a list of
all the possible methods. An error tuple is returned if the engine can't be
unloaded.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

ensure_engine_unloaded(Engine, EngineMethods) -> Result

Types:

EngineMethods = [engine_method_type()]

Result = ok | {error, Reason :: term()}

Unloads an engine loaded with the *ensure_engine_loaded*
function. It both removes the label from the OpenSSL internal engine list
and unloads the engine. An error tuple is returned if the engine can't be
unloaded.

*error:badarg* if the parameters are in
wrong format. It may also raise the exception *error:notsup* in case
there is no engine support in the underlying OpenSSL implementation.

See also the chapter Engine Load in the User's Guide.

crypto 5.0.2 | Ericsson AB |