.TH LIBPFM 3  "September, 2009" "" "Linux Programmer's Manual"
.SH NAME
pfm_get_perf_event_encoding \- encode event for perf_event API
.SH SYNOPSIS
.nf
.B #include <perfmon/pfmlib_perf_event.h>
.sp
.BI "int pfm_get_perf_event_encoding(const char *" str ", int " dfl_plm ", struct perf_event_attr *" attr ", char **" fstr ", int *" idx ");"
.sp
.SH DESCRIPTION
This function can be used in conjunction with the perf_events Linux kernel API which
provides access to hardware performance counters, kernel software counters and tracepoints.
The function takes an event string in \fBstr\fR and a default privilege level mask in \fBdfl_plm\fR
and fills out the relevant parts of the perf_events specific data structure in \fBattr\fR.

This function is \fBdeprecated\fR. It is superseded by \fBpfm_get_os_event_encoding()\fR
with the OS argument set to either \fBPFM_OS_PERF_EVENT\fR or \fBPFM_OS_PERF_EVENT_EXT\fR.
Using this function provides extended support for perf_events. Certain perf_event configuration
option are only available through this new interface.

The following examples illustrates the transition:

.nf
   struct perf_event_attr attr;
   int i, count = 0;
   uint64_t *codes;

   memset(&attr, 0, sizeof(attr));

   ret = pfm_get_perf_event_encoding("RETIRED_INSTRUCTIONS", PFM_PLM3, &attrs, NULL, NULL);
   if (ret != PFM_SUCCESS)
      err(1", cannot get encoding %s", pfm_strerror(ret));

.fi

is equivalent to:

.nf
   #include <perfmon/pfmlib_perf_event.h>
   struct perf_event_attr attr;
   pfm_perf_encode_arg_t arg;

   memset(&arg, 0, sizeof(arg));
   arg.size = sizeof(arg);
   arg.attr = &attr;

   ret = pfm_get_os_event_encoding("RETIRED_INSTRUCTIONS", PFM_PLM3, PFM_OS_PERF, &arg);
   if (ret != PFM_SUCCESS)
      err(1", cannot get encoding %s", pfm_strerror(ret));

.nf


The \fBdfl_plm\fR cannot be zero, though it may not necessarily be used by the event.
Depending on the event, combination of the following privilege levels may be used:
.TP
.B PFM_PLM3
Measure at privilege level 3. This usually corresponds to user level. On X86, it corresponds
to privilege levels 3, 2, 1. Check the PMU specific man page to verify if this level
is supported by your PMU model.
.TP
.B PFM_PLM2
Measure at privilege level 2. Check the PMU specific man page to verify if this level
is supported by your PMU model.
.TP
.B PFM_PLM1
Measure at privilege level 1. Check the PMU specific man page to verify if this level
is supported by your PMU model.
.TP
.B PFM_PLM0
Measure at privilege level 0. This usually corresponds to kernel level. Check the PMU
specific man page to verify if this level is supported by your PMU model.
.TP
.B PFM_PLMH
Measure at hypervisor privilege level. This is used in conjunction with hardware virtualization.
Check the PMU specific man page to verify if this level is supported by your PMU model.
.PP

If \fBfstr\fR is not NULL, the function will make it point to the fully qualified event string,
i.e., a string with the event name, all unit masks set, and the value of all modifiers.
The library will allocate memory to store the event string but it is the responsibility of the
caller to eventually free that string using free().

If \fBidx\fR is not NULL, it returns the corresponding unique event identifier.

Only select fields are modified by the function, the others are untouched.
The following fields in \fBattr\fR are modified:
.TP
.B type
The type of the event
.TP
.B config
The encoding of the event
.TP
.B exclude_user
Whether or not user level execution should be excluded from monitoring. The definition
of user is PMU model specific.
.TP
.B exclude_kernel
Whether or not kernel level execution should be excluded from monitoring. The definition
of kernel is PMU model specific.
.TP
.B exclude_hv
Whether or not hypervisor level execution should be excluded from monitoring. The definition
of hypervisor is PMU model specific.
.PP
By default, if no privilege level modifier is specified in the event string, the library clears
\fBexclude_user\fR, \fBexclude_kernel\fR and \fBexclude_hv\fR, resulting in the event being
measured at all levels subject to hardware support.

The function is able to work on only one event at a time. For convenience, it accepts
event strings with commas. In that case, it will translate the first event up to the
first comma. This is handy in case tools gets passed events as a comma-separated list.

.SH RETURN
The function returns in \fBattr\fR the perf_event encoding which corresponds to the event
string. If \fBidx\fR is not NULL, then it will contain the unique event identifier upon
successful return. The value \fBPFM_SUCCESS\fR is returned if successful, otherwise a negative
error code is returned.

.SH ERRORS
.TP
.B PFM_ERR_TOOSMALL
The \fBcode\fR argument is too small for the encoding.
.TP
.B PFM_ERR_INVAL
The \fBattr\fR argument is \fBNULL\fR.
.TP
.B PFM_ERR_NOMEM
Not enough memory.
.TP
.B PFM_ERR_NOTFOUND
Event not found.
.TP
.B PFM_ERR_ATTR
Invalid event attribute (unit mask or modifier)
.TP
.B PFM_ERR_ATTR_VAL
Invalid modifier value.
.TP
.B PFM_ERR_ATTR_SET
attribute already set, cannot be changed.
.TP
.B PFM_ERR_ATTR_UMASK
Missing unit mask.
.TP
.B PFM_ERR_ATTR_FEATCOMB
Unit masks or features cannot be combined into a single event.
.SH AUTHOR
Stephane Eranian <eranian@gmail.com>
.SH SEE ALSO
pfm_get_os_event_encoding(3)