table of contents
- bookworm 6.1.4-2
- testing 6.1.4-2
- unstable 6.1.4-2
- experimental 6.2.0-1
QwtWheel(3) | Qwt User's Guide | QwtWheel(3) |
NAME¶
QwtWheel - The Wheel Widget.
SYNOPSIS¶
#include <qwt_wheel.h>
Inherits QWidget.
Public Slots¶
void setValue (double)
Set a new value without adjusting to the step raster. void
setTotalAngle (double)
Set the total angle which the wheel can be turned. void setViewAngle
(double)
Specify the visible portion of the wheel. void setMass (double)
Set the slider's mass for flywheel effect.
Signals¶
void valueChanged (double value)
Notify a change of value. void wheelPressed ()
void wheelReleased ()
void wheelMoved (double value)
Public Member Functions¶
QwtWheel (QWidget *parent=NULL)
Constructor. virtual ~QwtWheel ()
Destructor. double value () const
void setOrientation (Qt::Orientation)
Set the wheel's orientation. Qt::Orientation orientation () const
double totalAngle () const
double viewAngle () const
void setTickCount (int)
Adjust the number of grooves in the wheel's surface. int tickCount ()
const
void setWheelWidth (int)
Set the width of the wheel. int wheelWidth () const
void setWheelBorderWidth (int)
Set the wheel border width of the wheel. int wheelBorderWidth () const
void setBorderWidth (int)
Set the border width. int borderWidth () const
void setInverted (bool)
En/Disable inverted appearance. bool isInverted () const
void setWrapping (bool)
En/Disable wrapping. bool wrapping () const
void setSingleStep (double)
Set the step size of the counter. double singleStep () const
void setPageStepCount (int)
Set the page step count. int pageStepCount () const
void setStepAlignment (bool on)
En/Disable step alignment. bool stepAlignment () const
void setRange (double min, double max)
Set the minimum and maximum values. void setMinimum (double)
double minimum () const
void setMaximum (double)
double maximum () const
void setUpdateInterval (int)
Specify the update interval when the wheel is flying. int
updateInterval () const
void setTracking (bool)
En/Disable tracking. bool isTracking () const
double mass () const
Protected Member Functions¶
virtual void paintEvent (QPaintEvent *) override
Qt Paint Event. virtual void mousePressEvent (QMouseEvent *) override
Mouse press event handler. virtual void mouseReleaseEvent (QMouseEvent
*) override
Mouse Release Event handler. virtual void mouseMoveEvent (QMouseEvent
*) override
Mouse Move Event handler. virtual void keyPressEvent (QKeyEvent *)
override
virtual void wheelEvent (QWheelEvent *) override
Handle wheel events. virtual void timerEvent (QTimerEvent *) override
Qt timer event. void stopFlying ()
Stop the flying movement of the wheel. QRect wheelRect () const
virtual QSize sizeHint () const override
virtual QSize minimumSizeHint () const override
virtual void drawTicks (QPainter *, const QRectF &)
virtual void drawWheelBackground (QPainter *, const QRectF &)
virtual double valueAt (const QPoint &) const
Detailed Description¶
The Wheel Widget.
The wheel widget can be used to change values over a very large range in very small steps. Using the setMass() member, it can be configured as a flying wheel.
The default range of the wheel is [0.0, 100.0]
See also
Definition at line 27 of file qwt_wheel.h.
Member Function Documentation¶
int QwtWheel::borderWidth () const¶
Returns
See also
Definition at line 586 of file qwt_wheel.cpp.
void QwtWheel::drawTicks (QPainter * painter, const QRectF & rect) [protected], [virtual]¶
Draw the Wheel's ticks
Parameters
rect Geometry for the wheel
Definition at line 817 of file qwt_wheel.cpp.
void QwtWheel::drawWheelBackground (QPainter * painter, const QRectF & rect) [protected], [virtual]¶
Draw the Wheel's background gradient
Parameters
rect Geometry for the wheel
Definition at line 761 of file qwt_wheel.cpp.
bool QwtWheel::isInverted () const¶
Returns
See also
Definition at line 1176 of file qwt_wheel.cpp.
bool QwtWheel::isTracking () const¶
Returns
See also
Definition at line 129 of file qwt_wheel.cpp.
void QwtWheel::keyPressEvent (QKeyEvent * event) [override], [protected], [virtual]¶
Handle key events
- Qt::Key_Home
Step to minimum() - Qt::Key_End
Step to maximum() - Qt::Key_Up
In case of a horizontal or not inverted vertical wheel the value will be incremented by the step size. For an inverted vertical wheel the value will be decremented by the step size. - Qt::Key_Down
In case of a horizontal or not inverted vertical wheel the value will be decremented by the step size. For an inverted vertical wheel the value will be incremented by the step size. - Qt::Key_PageUp
The value will be incremented by pageStepSize() * singleStepSize(). - Qt::Key_PageDown
The value will be decremented by pageStepSize() * singleStepSize().
Parameters
Definition at line 409 of file qwt_wheel.cpp.
double QwtWheel::mass () const¶
Returns
See also
Definition at line 1240 of file qwt_wheel.cpp.
double QwtWheel::maximum () const¶
Returns
See also
Definition at line 1114 of file qwt_wheel.cpp.
double QwtWheel::minimum () const¶
Returns
See also
Definition at line 1094 of file qwt_wheel.cpp.
QSize QwtWheel::minimumSizeHint () const [override], [protected], [virtual]¶
Returns
Warning
Definition at line 962 of file qwt_wheel.cpp.
void QwtWheel::mouseMoveEvent (QMouseEvent * event) [override], [protected], [virtual]¶
Mouse Move Event handler. Turn the wheel according to the mouse position
Parameters
Definition at line 188 of file qwt_wheel.cpp.
void QwtWheel::mousePressEvent (QMouseEvent * event) [override], [protected], [virtual]¶
Mouse press event handler. Start movement of the wheel.
Parameters
Definition at line 163 of file qwt_wheel.cpp.
void QwtWheel::mouseReleaseEvent (QMouseEvent * event) [override], [protected], [virtual]¶
Mouse Release Event handler. When the wheel has no mass the movement of the wheel stops, otherwise it starts flying.
Parameters
Definition at line 237 of file qwt_wheel.cpp.
Qt::Orientation QwtWheel::orientation () const¶
Returns
See also
Definition at line 661 of file qwt_wheel.cpp.
int QwtWheel::pageStepCount () const¶
Returns
See also
Definition at line 1043 of file qwt_wheel.cpp.
void QwtWheel::paintEvent (QPaintEvent * event) [override], [protected], [virtual]¶
Qt Paint Event.
Parameters
Definition at line 736 of file qwt_wheel.cpp.
void QwtWheel::setBorderWidth (int width)¶
Set the border width. The border defaults to 2.
Parameters
See also
Definition at line 576 of file qwt_wheel.cpp.
void QwtWheel::setInverted (bool on)¶
En/Disable inverted appearance. An inverted wheel increases its values in the opposite direction. The direction of an inverted horizontal wheel will be from right to left an inverted vertical wheel will increase from bottom to top.
Parameters
See also
Definition at line 1163 of file qwt_wheel.cpp.
void QwtWheel::setMass (double mass) [slot]¶
Set the slider's mass for flywheel effect. If the slider's mass is greater then 0, it will continue to move after the mouse button has been released. Its speed decreases with time at a rate depending on the slider's mass. A large mass means that it will continue to move for a long time.
Derived widgets may overload this function to make it public.
Parameters
See also
Definition at line 1221 of file qwt_wheel.cpp.
void QwtWheel::setMaximum (double value)¶
Set the maximum value of the range
Parameters
See also
Definition at line 1105 of file qwt_wheel.cpp.
void QwtWheel::setMinimum (double value)¶
Set the minimum value of the range
Parameters
See also
Note
Definition at line 1085 of file qwt_wheel.cpp.
void QwtWheel::setOrientation (Qt::Orientation orientation)¶
Set the wheel's orientation. The default orientation is Qt::Horizontal.
Parameters
See also
Definition at line 639 of file qwt_wheel.cpp.
void QwtWheel::setPageStepCount (int count)¶
Set the page step count. pageStepCount is a multiplicator for the single step size that typically corresponds to the user pressing PageUp or PageDown.
A value of 0 disables page stepping.
The default value is 1.
Parameters
See also
Definition at line 1034 of file qwt_wheel.cpp.
void QwtWheel::setRange (double min, double max)¶
Set the minimum and maximum values. The maximum is adjusted if necessary to ensure that the range remains valid. The value might be modified to be inside of the range.
Parameters
max Maximum value
See also
Definition at line 1059 of file qwt_wheel.cpp.
void QwtWheel::setSingleStep (double stepSize)¶
Set the step size of the counter. A value <= 0.0 disables stepping
Parameters
See also
Definition at line 980 of file qwt_wheel.cpp.
void QwtWheel::setStepAlignment (bool on)¶
En/Disable step alignment. When step alignment is enabled value changes initiated by user input ( mouse, keyboard, wheel ) are aligned to the multiples of the single step.
Parameters
See also
Definition at line 1004 of file qwt_wheel.cpp.
void QwtWheel::setTickCount (int count)¶
Adjust the number of grooves in the wheel's surface. The number of grooves is limited to 6 <= count <= 50. Values outside this range will be clipped. The default value is 10.
Parameters
See also
Definition at line 519 of file qwt_wheel.cpp.
void QwtWheel::setTotalAngle (double angle) [slot]¶
Set the total angle which the wheel can be turned. One full turn of the wheel corresponds to an angle of 360 degrees. A total angle of n*360 degrees means that the wheel has to be turned n times around its axis to get from the minimum value to the maximum value.
The default setting of the total angle is 360 degrees.
Parameters
See also
Definition at line 613 of file qwt_wheel.cpp.
void QwtWheel::setTracking (bool enable)¶
En/Disable tracking. If tracking is enabled (the default), the wheel emits the valueChanged() signal while the wheel is moving. If tracking is disabled, the wheel emits the valueChanged() signal only when the wheel movement is terminated.
The wheelMoved() signal is emitted regardless id tracking is enabled or not.
Parameters
See also
Definition at line 120 of file qwt_wheel.cpp.
void QwtWheel::setUpdateInterval (int interval)¶
Specify the update interval when the wheel is flying. Default and minimum value is 50 ms.
Parameters
See also
Definition at line 142 of file qwt_wheel.cpp.
void QwtWheel::setValue (double value) [slot]¶
Set a new value without adjusting to the step raster.
Parameters
See also
Warning
Definition at line 1127 of file qwt_wheel.cpp.
void QwtWheel::setViewAngle (double angle) [slot]¶
Specify the visible portion of the wheel. You may use this function for fine-tuning the appearance of the wheel. The default value is 175 degrees. The value is limited from 10 to 175 degrees.
Parameters
See also
Definition at line 676 of file qwt_wheel.cpp.
void QwtWheel::setWheelBorderWidth (int borderWidth)¶
Set the wheel border width of the wheel. The wheel border must not be smaller than 1 and is limited in dependence on the wheel's size. Values outside the allowed range will be clipped.
The wheel border defaults to 2.
Parameters
See also
Definition at line 551 of file qwt_wheel.cpp.
void QwtWheel::setWheelWidth (int width)¶
Set the width of the wheel. Corresponds to the wheel height for horizontal orientation, and the wheel width for vertical orientation.
Parameters
See also
Definition at line 934 of file qwt_wheel.cpp.
void QwtWheel::setWrapping (bool on)¶
En/Disable wrapping. If wrapping is true stepping up from maximum() value will take you to the minimum() value and vice versa.
Parameters
See also
Definition at line 1190 of file qwt_wheel.cpp.
double QwtWheel::singleStep () const¶
Returns
See also
Definition at line 989 of file qwt_wheel.cpp.
QSize QwtWheel::sizeHint () const [override], [protected], [virtual]¶
Returns
Definition at line 952 of file qwt_wheel.cpp.
bool QwtWheel::stepAlignment () const¶
Returns
See also
Definition at line 1016 of file qwt_wheel.cpp.
int QwtWheel::tickCount () const¶
Returns
See also
Definition at line 534 of file qwt_wheel.cpp.
void QwtWheel::timerEvent (QTimerEvent * event) [override], [protected], [virtual]¶
Qt timer event. The flying wheel effect is implemented using a timer
Parameters
See also
Definition at line 283 of file qwt_wheel.cpp.
double QwtWheel::totalAngle () const¶
Returns
See also
Definition at line 626 of file qwt_wheel.cpp.
int QwtWheel::updateInterval () const¶
Returns
See also
Definition at line 151 of file qwt_wheel.cpp.
double QwtWheel::value () const¶
Returns
See also
Definition at line 1147 of file qwt_wheel.cpp.
double QwtWheel::valueAt (const QPoint & pos) const [protected], [virtual]¶
Determine the value corresponding to a specified point
Parameters
Returns
Definition at line 697 of file qwt_wheel.cpp.
void QwtWheel::valueChanged (double value) [signal]¶
Notify a change of value. When tracking is enabled this signal will be emitted every time the value changes.
Parameters
See also
double QwtWheel::viewAngle () const¶
Returns
See also
Definition at line 686 of file qwt_wheel.cpp.
int QwtWheel::wheelBorderWidth () const¶
Returns
See also
Definition at line 563 of file qwt_wheel.cpp.
void QwtWheel::wheelEvent (QWheelEvent * event) [override], [protected], [virtual]¶
Handle wheel events. In/Decrement the value
Parameters
Definition at line 324 of file qwt_wheel.cpp.
void QwtWheel::wheelMoved (double value) [signal]¶
This signal is emitted when the user moves the wheel with the mouse.
Parameters
void QwtWheel::wheelPressed () [signal]¶
This signal is emitted when the user presses the the wheel with the mouse
QRect QwtWheel::wheelRect () const [protected]¶
Returns
Definition at line 594 of file qwt_wheel.cpp.
void QwtWheel::wheelReleased () [signal]¶
This signal is emitted when the user releases the mouse
int QwtWheel::wheelWidth () const¶
Returns
See also
Definition at line 944 of file qwt_wheel.cpp.
bool QwtWheel::wrapping () const¶
Returns
See also
Definition at line 1199 of file qwt_wheel.cpp.
Author¶
Generated automatically by Doxygen for Qwt User's Guide from the source code.
Sun Jul 18 2021 | Version 6.2.0 |