table of contents
sane-tamarack(5) | SANE Scanner Access Now Easy | sane-tamarack(5) |
NAME¶
sane-tamarack - SANE backend for Tamarack flatbed scanners
DESCRIPTION¶
The sane-tamarack library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Tamarack flatbed scanners:
Artiscan 8000C
Artiscan 12000C
DEVICE NAMES¶
This backend expects device names of the form:
Where special is the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI device or a symlink to such a device. The program sane-find-scanner(1) helps to find out the correct device. Under Linux, such a device name could be /dev/sga or /dev/sge, for example. See sane-scsi(5) for details.
FILES¶
- /etc/sane.d/tamarack.conf
- The backend configuration file (see also description of SANE_CONFIG_DIR below).
- /usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.a
- The static library implementing this backend.
- /usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so
- The shared library implementing this backend (present on systems that support dynamic loading).
ENVIRONMENT¶
- SANE_CONFIG_DIR
- This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories tmp/config, ., and /etc/sane.d being searched (in this order).
- SANE_DEBUG_TAMARACK
- If the library was compiled with debug support enabled, this environment
variable controls the debug level for this backend. Higher debug levels
increase the verbosity of the output.
Example: export SANE_DEBUG_TAMARACK=4
SEE ALSO¶
sane(7), sane-find-scanner(1), sane-scsi(5)
AUTHOR¶
Roger Wolff
14 Jul 2008 |