| LIMEUTIL(1) | User Commands | LIMEUTIL(1) |
NAME¶
LimeUtil - control and update LMS7 based transceiver devices
SYNOPSIS¶
LimeUtil [OPTIONS]
DESCRIPTION¶
LimeUtil is a tool to show information about and control LMS7 based transceiver devices such as the LimeSDR. It can be used to update the firmware and to calibrate the device.
OPTIONS¶
- --help
- Print a help message.
- --info
- Print information about LimeSuite and found devices.
- --find[="SPEC"]
- Discover available devices, restricted to those matching the SPEC if given. If no matching devices are found it will exit with exit status 1.
- --make[="SPEC"]
- Create a device instance.
Advanced options¶
- --args[="ARGS"]
- Supply arguments ARGS to the --update, --fpga and --fw options.
- --update
- Download latest firmware and program it into the device flash memory.
- --fpga="FILE"
- Program FPGA firmware image in FILE to device flash memory.
- --fw="FILE"
- Program FX3 firmware image in FILE to device flash memory.
- --timing
- Time interfaces and operations.
Calibrations sweep¶
- --cal[="ARGS"]
- Calibrate device. Use ARGS to select and configure device.
- --start=FREQ
- Start calibration sweep at frequency FREQ Hz.
- --stop=EQ
- Stop calibration sweep at frequency FREQ Hz.
- --step=STEP
- Step frequency during calibration sweep by STEP Hz (default 1 MHz).
- --bw=BW
- Set calibration bandwidth to BW Hz (default 30 MHz).
- --dir=DIR
- Set calibration direction to DIR (one of RX, TX or BOTH, default is BOTH).
- --chans=CHANNELS
- Set calibration channels to CHANNELS (one of 0, 1 or ALL, default is ALL).
HOMEPAGE¶
LimeUtil is part of the Lime Suite.
SEE ALSO¶
LimeSuiteGUI(1)
| 2017-09-18 | Lime Suite |