NAME¶

perf-c2c - Shared Data C2C/HITM Analyzer.

SYNOPSIS¶

perf c2c record [<options>] <command>
perf c2c record [<options>] — [<record command options>] <command>
perf c2c report [<options>]

DESCRIPTION¶

C2C stands for Cache To Cache.

The perf c2c tool provides means for Shared Data C2C/HITM analysis. It allows you to track down the cacheline contentions.

The tool is based on x86’s load latency and precise store facility events provided by Intel CPUs. These events provide: - memory address of the access - type of the access (load and store details) - latency (in cycles) of the load access

The c2c tool provide means to record this data and report back access details for cachelines with highest contention - highest number of HITM accesses.

The basic workflow with this tool follows the standard record/report phase. User uses the record command to record events data and report command to display it.

RECORD OPTIONS¶

-e, --event=

-v, --verbose

-l, --ldlat

-k, --all-kernel

-u, --all-user

REPORT OPTIONS¶

-k, --vmlinux=<file>

-v, --verbose

-i, --input

-N, --node-info

-c, --coalesce

-g, --call-graph

--stdio

--stats

--full-symbols

--no-source

--show-all

-f, --force

-d, --display

C2C RECORD¶

The perf c2c record command setup options related to HITM cacheline analysis and calls standard perf record command.

Following perf record options are configured by default: (check perf record man page for details)

-W,-d,--sample-cpu

Unless specified otherwise with -e option, following events are monitored by default:

cpu/mem-loads,ldlat=30/P
cpu/mem-stores/P

User can pass any perf record option behind -- mark, like (to enable callchains and system wide monitoring):

$ perf c2c record -- -g -a

Please check RECORD OPTIONS section for specific c2c record options.

C2C REPORT¶

The perf c2c report command displays shared data analysis. It comes in two display modes: stdio and tui (default).

The report command workflow is following: - sort all the data based on the cacheline address - store access details for each cacheline - sort all cachelines based on user settings - display data

In general perf report output consist of 2 basic views: 1) most expensive cachelines list 2) offsets details for each cacheline

For each cacheline in the 1) list we display following data: (Both stdio and TUI modes follow the same fields output)

Index
- zero based index to identify the cacheline

Cacheline
- cacheline address (hex number)

Total records
- sum of all cachelines accesses

Rmt/Lcl Hitm
- cacheline percentage of all Remote/Local HITM accesses

LLC Load Hitm - Total, Lcl, Rmt
- count of Total/Local/Remote load HITMs

Store Reference - Total, L1Hit, L1Miss


  Total - all store accesses


  L1Hit - store accesses that hit L1


  L1Hit - store accesses that missed L1

Load Dram
- count of local and remote DRAM accesses

LLC Ld Miss
- count of all accesses that missed LLC

Total Loads
- sum of all load accesses

Core Load Hit - FB, L1, L2
- count of load hits in FB (Fill Buffer), L1 and L2 cache

LLC Load Hit - Llc, Rmt
- count of LLC and Remote load hits

For each offset in the 2) list we display following data:

HITM - Rmt, Lcl
- % of Remote/Local HITM accesses for given offset within cacheline

Store Refs - L1 Hit, L1 Miss
- % of store accesses that hit/missed L1 for given offset within cacheline

Data address - Offset
- offset address

Pid
- pid of the process responsible for the accesses

Tid
- tid of the process responsible for the accesses

Code address
- code address responsible for the accesses

cycles - rmt hitm, lcl hitm, load


  - sum of cycles for given accesses - Remote/Local HITM and generic load

cpu cnt


  - number of cpus that participated on the access

Symbol


  - code symbol related to the 'Code address' value

Shared Object


  - shared object name related to the 'Code address' value

Source:Line


  - source information related to the 'Code address' value

Node


  - nodes participating on the access (see NODE INFO section)

NODE INFO¶

The Node field displays nodes that accesses given cacheline offset. Its output comes in 3 flavors: - node IDs separated by , - node IDs with stats for each ID, in following format: Node{cpus %hitms %stores} - node IDs with list of affected CPUs in following format: Node{cpu list}

User can switch between above flavors with -N option or use n key to interactively switch in TUI mode.

COALESCE¶

User can specify how to sort offsets for cacheline.

Following fields are available and governs the final output fields set for caheline offsets output:

tid   - coalesced by process TIDs
pid   - coalesced by process PIDs
iaddr - coalesced by code address, following fields are displayed:


           Code address, Code symbol, Shared Object, Source line
dso   - coalesced by shared object

By default the coalescing is setup with pid,iaddr.

STDIO OUTPUT¶

The stdio output displays data on standard output.

Following tables are displayed: Trace Event Information - overall statistics of memory accesses

Global Shared Cache Line Event Information
- overall statistics on shared cachelines

Shared Data Cache Line Table
- list of most expensive cachelines

Shared Cache Line Distribution Pareto
- list of all accessed offsets for each cacheline

TUI OUTPUT¶

The TUI output provides interactive interface to navigate through cachelines list and to display offset details.

For details please refer to the help window by pressing ? key.

CREDITS¶

Although Don Zickus, Dick Fowles and Joe Mario worked together to get this implemented, we got lots of early help from Arnaldo Carvalho de Melo, Stephane Eranian, Jiri Olsa and Andi Kleen.

C2C BLOG¶

Check Joe’s blog on c2c tool for detailed use case explanation: https://joemario.github.io/blog/2016/09/01/c2c-blog/

SEE ALSO¶

perf_4.15-record(1), perf_4.15-mem(1)