Scroll to navigation

UPSSTATS.CGI(8) NUT Manual UPSSTATS.CGI(8)

NAME

upsstats.cgi - Web-based UPS status viewer

SYNOPSIS

upsstats.cgi


Note

As a CGI program, this should be invoked through your web server. If you run it from the command line, it will either complain about unauthorized access or spew a bunch of HTML at you.

DESCRIPTION

upsstats.cgi uses template files to build web pages containing status information from UPS hardware. It can repeat sections of those template files to monitor several UPSes simultaneously, or focus on a single UPS.

These templates can also include references to upsimage.cgi(8) for graphical displays of battery charge levels, voltage readings, and the UPS load.

ACCESS CONTROL

upsstats will only talk to upsd(8) servers that have been defined in your hosts.conf(5). If it complains that "Access to that host is not authorized", check that file first.

TEMPLATES

The web page that is displayed is actually a template containing commands to upsstats which are replaced by status information. The default file used for the overview is upsstats.html.

When monitoring a single UPS, the file displayed is upsstats-single.html.

The format of these files, including the possible commands, is documented in upsstats.html(5).

FILES

hosts.conf(5), upsstats.html(5), upsstats-single.html

SEE ALSO

upsimage.cgi(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

01/25/2023 Network UPS Tools 2.8.0