Podman unit search path¶

Podman user unit search path¶

Enabling unit files¶

The services created by Podman are considered transient by systemd, which means they don't have the same persistence rules as regular units. In particular, it is not possible to "systemctl enable" them in order for them to become automatically enabled on the next boot.

To compensate for this, the generator manually applies the [Install] section of the container definition unit files during generation, in the same way systemctl enable would do when run later.

For example, to start a container on boot, add something like this to the file:

[Install]
WantedBy=default.target

Currently, only the Alias, WantedBy and RequiredBy keys are supported.

NOTE: To express dependencies between containers, use the generated names of the service. In other words WantedBy=other.service, not WantedBy=other.container. The same is true for other kinds of dependencies, too, like After=other.service.

AddCapability=¶

By default, the container runs with no capabilities (due to DropCapabilities='all'). If any specific caps are needed, then add them with this key. For example using AddCapability=CAP_DAC_OVERRIDE.

This is a space separated list of capabilities. This key can be listed multiple times.

For example:

AddCapability=CAP_DAC_OVERRIDE CAP_IPC_OWNER

AddDevice=¶

Adds a device node from the host into the container. The format of this is HOST-DEVICE[:CONTAINER-DEVICE][:PERMISSIONS], where HOST-DEVICE is the path of the device node on the host, CONTAINER-DEVICE is the path of the device node in the container, and PERMISSIONS is a list of permissions combining 'r' for read,

This key can be listed multiple times.

Annotation=¶

Set one or more OCI annotations on the container. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

ContainerName=¶

The (optional) name of the Podman container. If this is not specified, the default value of systemd-%N will be used, which is the same as the service name but with a systemd- prefix to avoid conflicts with user-managed containers.

DropCapability= (defaults to all)¶

Drop these capabilities from the default podman capability set, or all to drop all capabilities.

This is a space separated list of capabilities. This key can be listed multiple times.

For example:

DropCapability=CAP_DAC_OVERRIDE CAP_IPC_OWNER

Environment=¶

Set an environment variable in the container. This uses the same format as services in systemd and can be listed multiple times.

EnvironmentFile=¶

Use a line-delimited file to set environment variables in the container. The path may be absolute or relative to the location of the unit file. This key may be used multiple times, and the order persists when passed to podman run.

EnvironmentHost= (defaults to no)¶

Use the host environment inside of the container.

Exec=¶

If this is set then it defines what command line to run in the container. If it is not set the default entry point of the container image is used. The format is the same as for systemd command lines.

ExposeHostPort=¶

Exposes a port, or a range of ports (e.g. 50-59), from the host to the container. Equivalent to the Podman --expose option.

This key can be listed multiple times.

Group=¶

The (numeric) GID to run as inside the container. This does not need to match the GID on the host, which can be modified with UsersNS, but if that is not specified, this GID is also used on the host.

HealthCmd=¶

Set or alter a healthcheck command for a container. A value of none disables existing healthchecks. Equivalent to the Podman --health-cmd option.

HealthInterval=¶

Set an interval for the healthchecks. An interval of disable results in no automatic timer setup. Equivalent to the Podman --health-interval option.

HealthOnFailure=¶

Action to take once the container transitions to an unhealthy state. The "kill" action in combination integrates best with systemd. Once the container turns unhealthy, it gets killed and systemd will restart service. Equivalent to the Podman --health-on-failure option.

HealthRetries=¶

The number of retries allowed before a healthcheck is considered to be unhealthy. Equivalent to the Podman --health-retries option.

HealthStartPeriod=¶

The initialization time needed for a container to bootstrap. Equivalent to the Podman --health-start-period option.

HealthStartupCmd=¶

Set a startup healthcheck command for a container. Equivalent to the Podman --health-startup-cmd option.

HealthStartupInterval=¶

Set an interval for the startup healthcheck. An interval of disable results in no automatic timer setup. Equivalent to the Podman --health-startup-interval option.

HealthStartupRetries=¶

The number of attempts allowed before the startup healthcheck restarts the container. Equivalent to the Podman --health-startup-retries option.

HealthStartupSuccess=¶

The number of successful runs required before the startup healthcheck will succeed and the regular healthcheck will begin. Equivalent to the Podman --health-startup-success option.

HealthStartupTimeout=¶

The maximum time a startup healthcheck command has to complete before it is marked as failed. Equivalent to the Podman --health-startup-timeout option.

HealthTimeout=¶

The maximum time allowed to complete the healthcheck before an interval is considered failed. Equivalent to the Podman --health-timeout option.

Image=¶

The image to run in the container. This image must be locally installed for the service to work when it is activated, because the generated service file will never try to download images. It is recommended to use a fully qualified image name rather than a short name, both for performance and robustness reasons.

The format of the name is the same as when passed to podman run, so it supports e.g., using :tag or using digests guarantee a specific image version.

IP=¶

Specify a static IPv4 address for the container, for example 10.88.64.128. Equivalent to the Podman --ip option.

IP6=¶

Specify a static IPv6 address for the container, for example fd46:db93:aa76:ac37::10. Equivalent to the Podman --ip6 option.

Label=¶

Set one or more OCI labels on the container. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

LogDriver=¶

Set the log-driver Podman should use when running the container. Equivalent to the Podman --log-driver option.

Mount=¶

Attach a filesystem mount to the container. This is equivalent to the Podman --mount option, and generally has the form type=TYPE,TYPE-SPECIFIC-OPTION[,...].

As a special case, for type=volume if source ends with .volume, a Podman named volume called systemd-$name will be used as the source, and the generated systemd service will contain a dependency on the $name-volume.service. Such a volume can be automatically be lazily created by using a $name.volume quadlet file.

This key can be listed multiple times.

Network=¶

Specify a custom network for the container. This has the same format as the --network option to podman run. For example, use host to use the host network in the container, or none to not set up networking in the container.

As a special case, if the name of the network ends with .network, a Podman network called systemd-$name will be used, and the generated systemd service will contain a dependency on the $name-network.service. Such a network can be automatically created by using a $name.network quadlet file.

This key can be listed multiple times.

NoNewPrivileges= (defaults to no)¶

If enabled (which is the default), this disables the container processes from gaining additional privileges via things like setuid and file capabilities.

Rootfs=¶

The rootfs to use for the container. Rootfs points to a directory on the system that contains the content to be run within the container. This option conflicts with the Image option.

The format of the rootfs is the same as when passed to podman run --rootfs, so it supports ovelay mounts as well.

Note: On SELinux systems, the rootfs needs the correct label, which is by default unconfined_u:object_r:container_file_t:s0.

Notify= (defaults to no)¶

By default, Podman is run in such a way that the systemd startup notify command is handled by the container runtime. In other words, the service is deemed started when the container runtime starts the child in the container. However, if the container application supports sd_notify, then setting Notifyto true will pass the notification details to the container allowing it to notify of startup on its own.

PodmanArgs=¶

This key contains a list of arguments passed directly to the end of the podman run command in the generated file (right before the image name in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters. This key can be listed multiple times.

PublishPort=¶

Exposes a port, or a range of ports (e.g. 50-59), from the container to the host. Equivalent to the Podman --publish option. The format is similar to the Podman options, which is of the form ip:hostPort:containerPort, ip::containerPort, hostPort:containerPort or containerPort, where the number of host and container ports must be the same (in the case of a range).

If the IP is set to 0.0.0.0 or not set at all, the port will be bound on all IPv4 addresses on the host; use [::] for IPv6.

Note that not listing a host port means that Podman will automatically select one, and it may be different for each invocation of service. This makes that a less useful option. The allocated port can be found with the podman port command.

This key can be listed multiple times.

ReadOnly= (defaults to no)¶

If enabled, makes image read-only, with /var/tmp, /tmp and /run a tmpfs (unless disabled by VolatileTmp=no).r

NOTE: Podman will automatically copy any content from the image onto the tmpfs

RunInit= (default to no)¶

If enabled, the container will have a minimal init process inside the container that forwards signals and reaps processes.

SeccompProfile=¶

Set the seccomp profile to use in the container. If unset, the default podman profile is used. Set to either the pathname of a json file, or unconfined to disable the seccomp filters.

SecurityLabelDisable=¶

Turn off label separation for the container.

SecurityLabelFileType=¶

Set the label file type for the container files.

SecurityLabelLevel=¶

Set the label process level for the container processes.

SecurityLabelType=¶

Set the label process type for the container processes.

Secret=¶

Use a Podman secret in the container either as a file or an environment variable. This is equivalent to the Podman --secret option and generally has the form secret[,opt=opt ...]

Tmpfs=¶

Mount a tmpfs in the container. This is equivalent to the Podman --tmpfs option, and generally has the form CONTAINER-DIR[:OPTIONS].

This key can be listed multiple times.

Timezone= (if unset uses system-configured default)¶

The timezone to run the container in.

User=¶

The (numeric) UID to run as inside the container. This does not need to match the UID on the host, which can be modified with UserNS, but if that is not specified, this UID is also used on the host.

UserNS=¶

Set the user namespace mode for the container. This is equivalent to the Podman --userns option and generally has the form MODE[:OPTIONS,...].

VolatileTmp= (default to no, or yes if ReadOnly enabled)¶

If enabled, the container will have a fresh tmpfs mounted on /tmp.

NOTE: Podman will automatically copy any content from the image onto the tmpfs

Volume=¶

Mount a volume in the container. This is equivalent to the Podman --volume option, and generally has the form [[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]].

If SOURCE-VOLUME starts with ., Quadlet will resolve the path relative to the location of the unit file.

As a special case, if SOURCE-VOLUME ends with .volume, a Podman named volume called systemd-$name will be used as the source, and the generated systemd service will contain a dependency on the $name-volume.service. Such a volume can be automatically be lazily created by using a $name.volume quadlet file.

This key can be listed multiple times.

ConfigMap=¶

Pass the Kubernetes ConfigMap YAML at path to podman kube play via the --configmap argument. Unlike the configmap argument, the value may contain only one path but it may be absolute or relative to the location of the unit file.

This key may be used multiple times

LogDriver=¶

Set the log-driver Podman should use when running the container. Equivalent to the Podman --log-driver option.

Network=¶

Specify a custom network for the container. This has the same format as the --network option to podman kube play. For example, use host to use the host network in the container, or none to not set up networking in the container.

As a special case, if the name of the network ends with .network, a Podman network called systemd-$name will be used, and the generated systemd service will contain a dependency on the $name-network.service. Such a network can be automatically created by using a $name.network quadlet file.

This key can be listed multiple times.

PublishPort=¶

Exposes a port, or a range of ports (e.g. 50-59), from the container to the host. Equivalent to the podman kube play's --publish option. The format is similar to the Podman options, which is of the form ip:hostPort:containerPort, ip::containerPort, hostPort:containerPort or containerPort, where the number of host and container ports must be the same (in the case of a range).

If the IP is set to 0.0.0.0 or not set at all, the port will be bound on all IPv4 addresses on the host; use [::] for IPv6.

The list of published ports specified in the unit file will be merged with the list of ports specified in the Kubernetes YAML file. If the same container port and protocol is specified in both, the entry from the unit file will take precedence

This key can be listed multiple times.

UserNS=¶

Set the user namespace mode for the container. This is equivalent to the Podman --userns option and generally has the form MODE[:OPTIONS,...].

Yaml=¶

The path, absolute or relative to the location of the unit file, to the Kubernetes YAML file to use.

DisableDNS= (defaults to no)¶

If enabled, disables the DNS plugin for this network.

This is equivalent to the Podman --disable-dns option

Driver= (defaults to bridge)¶

Driver to manage the network. Currently bridge, macvlan and ipvlan are supported.

This is equivalent to the Podman --driver option

Gateway=¶

Define a gateway for the subnet. If you want to provide a gateway address, you must also provide a subnet option.

This is equivalent to the Podman --gateway option

This key can be listed multiple times.

Internal= (defaults to no)¶

Restrict external access of this network.

This is equivalent to the Podman --internal option

IPAMDriver=¶

Set the ipam driver (IP Address Management Driver) for the network. Currently host-local, dhcp and none are supported.

This is equivalent to the Podman --ipam-driver option

IPRange=¶

Allocate container IP from a range. The range must be a complete subnet and in CIDR notation. The ip-range option must be used with a subnet option.

This is equivalent to the Podman --ip-range option

This key can be listed multiple times.

IPv6=¶

Enable IPv6 (Dual Stack) networking.

This is equivalent to the Podman --ipv6 option

Label=¶

Set one or more OCI labels on the network. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

Options=¶

Set driver specific options.

This is equivalent to the Podman --opt option

Subnet=¶

The subnet in CIDR notation.

This is equivalent to the Podman --subnet option

This key can be listed multiple times.

Copy= (default to yes)¶

If enabled, the content of the image located at the mountpoint of the volume is copied into the volume on the first run.

Device=¶

The path of a device which should be mounted for the volume.

Group=¶

The host (numeric) GID, or group name to use as the group for the volume

Label=¶

Set one or more OCI labels on the volume. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

Options=¶

The mount options to use for a filesystem as used by the mount(8) command -o option.

Type=¶

The filesystem type of Device as used by the mount(8) commands -t option.

User=¶

The host (numeric) UID, or user name to use as the owner for the volume