Scroll to navigation

uhd_cal_tx_dc_offset(1) User Commands uhd_cal_tx_dc_offset(1)

NAME

uhd_cal_tx_dc_offset - Generate TX DC Offset Calibration Table for a UHD Device

DESCRIPTION

The Universal Software Radio Peripheral Hardware Drivers handle calibration information. This application reduces TX DC offset within the specified frequency range using transmit leakage into the receive path. Remove all external hardware from the RF antenna ports before using this application. This can take up to several minutes with default settings.

NOTE: This application can only be used with the WBX, SBX, XCVR2450, and RFX daughterboards.

OPTIONS

help message
enable some verbose
device address args [default = ""]
Transmit wave frequency in Hz
Transmit wave amplitude in counts
RX LO offset from the TX LO in Hz
Frequency start in Hz (will use beginning of frequency range if unspecified)
Frequency stop in Hz (will use end of frequency range if unspecified)
Step size for LO sweep in Hz
Samples per data capture

SEE ALSO

UHD documentation: http://files.ettus.com/manual/

GR-UHD documentation: http://gnuradio.org/doc/doxygen/page_uhd.html

Other UHD programs:

uhd_cal_rx_iq_balance(1) uhd_cal_tx_iq_balance(1)

AUTHOR

This manual page was written by Maitland Bottoms and Nicholas Corgan for the Debian project (but may be used by others).

COPYRIGHT

Copyright (c) 2012-2022 Ettus Research, A National Instruments Brand

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

3.7.0 UHD