fdformat - low-level format a floppy disk
fdformat [options] device
fdformat does a low-level format on a floppy disk. device is
usually one of the following (for floppy devices the major = 2, and the minor
is shown for informational purposes only):
/dev/fd0d360 (minor = 4)
/dev/fd0h1200 (minor = 8)
/dev/fd0D360 (minor = 12)
/dev/fd0H360 (minor = 12)
/dev/fd0D720 (minor = 16)
/dev/fd0H720 (minor = 16)
/dev/fd0h360 (minor = 20)
/dev/fd0h720 (minor = 24)
/dev/fd0H1440 (minor = 28)
/dev/fd1d360 (minor = 5)
/dev/fd1h1200 (minor = 9)
/dev/fd1D360 (minor = 13)
/dev/fd1H360 (minor = 13)
/dev/fd1D720 (minor = 17)
/dev/fd1H720 (minor = 17)
/dev/fd1h360 (minor = 21)
/dev/fd1h720 (minor = 25)
/dev/fd1H1440 (minor = 29)
The generic floppy devices, /dev/fd0 and /dev/fd1, will fail to
work with fdformat when a non-standard format is being used, or if
the format has not been autodetected earlier. In this case, use
setfdprm(8) to load the disk parameters.
- -f, --from N
- Start at the track N (default is 0).
- -t, --to N
- Stop at the track N.
- -r, --repair N
- Try to repair tracks failed during the verification (max N
- -n, --no-verify
- Skip the verification that is normally performed after the
- -V, --version
- Display version information and exit.
- -h, --help
- Display help text and exit.
fd(4), emkfs(8), mkfs(8), setfdprm(8)
Werner Almesberger (firstname.lastname@example.org)