Scroll to navigation

DAEMON(1) User Commands DAEMON(1)

NAME

daemon - turns other processes into daemons

SYNOPSIS

 usage: daemon [options] [--] [cmd arg...]
 options:
 -h, --help                - Print a help message then exit
 -V, --version             - Print a version message then exit
 -v, --verbose[=level]     - Set the verbosity level
 -d, --debug[=level]       - Set the debugging level
 -C, --config=path         - Specify the system configuration file
 -N, --noconfig            - Bypass the system configuration file
 -n, --name=name           - Guarantee a single named instance
 -X, --command="cmd"       - Specify the client command as an option
 -P, --pidfiles=/dir       - Override standard pidfile location
 -F, --pidfile=/path       - Override standard pidfile name and location
 -u, --user=user[:[group]] - Run the client as user[:group]
 -R, --chroot=path         - Run the client with path as root
 -D, --chdir=path          - Run the client in directory path
 -m, --umask=umask         - Run the client with the given umask
 -e, --env="var=val"       - Set a client environment variable
 -i, --inherit             - Inherit environment variables
 -U, --unsafe              - Allow execution of unsafe executable
 -S, --safe                - Disallow execution of unsafe executable
 -c, --core                - Allow core file generation
     --nocore              - Disallow core file generation (default)
 -r, --respawn             - Respawn the client when it terminates
 -a, --acceptable=#        - Minimum acceptable client duration (seconds)
 -A, --attempts=#          - Respawn # times on error before delay
 -L, --delay=#             - Delay between respawn attempt bursts (seconds)
 -M, --limit=#             - Maximum number of respawn attempt bursts
     --idiot               - Idiot mode (trust root with the above)
 -f, --foreground          - Run the client in the foreground
 -p, --pty[=noecho]        - Allocate a pseudo terminal for the client
 -B, --bind                - Stop when the user's last logind session ends
 -l, --errlog=spec         - Send daemon's error output to syslog or file
 -b, --dbglog=spec         - Send daemon's debug output to syslog or file
 -o, --output=spec         - Send client's output to syslog or file
 -O, --stdout=spec         - Send client's stdout to syslog or file
 -E, --stderr=spec         - Send client's stderr to syslog or file
     --ignore-eof          - After SIGCHLD ignore any client output
     --read-eof            - After SIGCHLD read any client output (default)
     --running             - Check if a named daemon is running
     --restart             - Restart a named daemon client
     --stop                - Terminate a named daemon process
     --signal=signame      - Send a signal to a named daemon
     --list                - Print a list of named daemons

DESCRIPTION

daemon(1) turns other processes into daemons. There are many tasks that need to be performed to correctly set up a daemon process. This can be tedious. daemon performs these tasks for other processes.

The preparatory tasks that daemon performs for other processes are:

  • First, revoke any setuid or setgid privileges that daemon may have been installed with (by system administrators who laugh in the face of danger).
  • Process command line options.
  • Change the root directory if the --chroot option was supplied.
  • Change the process uid and gid if the --user option was supplied. Only root can use this option. Note that the uid of daemon itself is changed, rather than just changing the uid of the client process.
  • Read the system configuration file(s) (/etc/daemon.conf and /etc/daemon.conf.d/* by default, or specified by the --config option), unless the --noconfig option was supplied. Then read the user's personal configuration file(s) (~/.daemonrc and ~/.daemonrc.d/*), if any. Generic options that apply to all daemons are processed first, then options that are specific to the daemon with the given name. Note: The root directory and the user must be set before access to the configuration file(s) can be attempted, so neither the --chroot nor --user options may appear in the configuration file.

    On BSD systems (except macOS), the system configuration file(s) are /usr/local/etc/daemon.conf and /usr/local/etc/daemon.conf.d/* by default.

    On macOS, when installed via macports, the system configuration file(s) are /opt/local/etc/daemon.conf and /opt/local/etc/daemon.conf.d/*.

  • Disable core file generation to prevent leaking potentially sensitive information in daemons that are run by root (unless the --core option was supplied).
  • Become a daemon process:
If daemon was not invoked by init(8) (i.e. parent process id 1) or inetd(8) (i.e. stdin is a socket):
  • Ignore SIGHUP signals in case the current process session leader terminates while attached to a controlling terminal, causing us to receive a SIGHUP signal before we start our own process session below.

    This can happen when daemon was invoked interactively via the shell builtin exec. When this initial process terminates below, the terminal emulator that invoked the shell also terminates, so daemon need to protect itself from that.

  • Background the process to lose process group leadership.
  • Start a new process session.
  • Background the process again to lose process session leadership. Under SVR4, this prevents the process from ever gaining a controlling terminal. This is only necessary under SVR4, but is always done for simplicity. Note that ignoring SIGHUP signals earlier means that when the newly created process session leader terminates, then even if it has a controlling terminal open, the newly backgrounded process won't receive the corresponding SIGHUP signal that is sent to all processes in the process session's foreground process group, because it inherited signal dispositions from the initial process.
  • Change the current directory to the root directory so as not to hamper umounts.
  • Clear the umask to enable explicit file creation modes.
  • Close all open file descriptors. If daemon was invoked by inetd(8), stdin, stdout and stderr are left open, because they are open to a socket.
  • Open stdin, stdout and stderr to /dev/null, in case something requires them to be open. Of course, this is not done if daemon was invoked by inetd(8).
  • If the --name option was supplied, create and lock a file containing the process id of the daemon process. The presence of this locked file prevents two instances of a daemon with the same name from running at the same time. The default location of the pidfile is /var/run for root (/etc on Solaris, /opt/local/var/run on macOS when installed via macports), and /tmp for normal users. If the --pidfiles option was supplied, its argument specifies the directory in which the pidfile will be placed. If the --pidfile option was supplied, its argument specifies the name of the pidfile and the directory in which it will be placed.
  • If the --umask option was supplied, set the umask to its argument, which must be a valid three-digit octal mode. Otherwise, set the umask to 022, to prevent clients from accidentally creating group- or world-writable files.
  • Set the current directory if the --chdir option was supplied.
  • Spawn the client command and wait for it to terminate. The client command can be specified as command line arguments, or as the argument of the --command option. If both the --command option and command line arguments are present, the client command is the result of appending the command line arguments to the argument of the --command option.
  • If the --output, --stdout and/or --stderr options were supplied, the client's standard output and/or standard error are captured by daemon, and are sent to the respective syslog destinations.
  • When the client terminates, daemon respawns it if the --respawn option was supplied. If the client ran for less than 300 seconds (or the value of the --acceptable option), then daemon sees this as a failure. It will attempt to restart the client up to five times (or the value of the --attempts option), before waiting for 300 seconds (or the value of the --delay option). This gives the system administrator the chance to correct whatever is preventing the client from running successfully without overloading system resources. If the --limit option was supplied, daemon terminates after the specified number of respawn attempt bursts. The default is zero, which means never give up, never surrender.

    When the client terminates, and the --respawn option wasn't supplied, daemon terminates as well.

  • If daemon receives a SIGTERM signal (e.g. from a separate invocation of daemon with the --stop option), it propagates the signal to the client and then terminates.
  • If daemon receives a SIGUSR1 signal (from a separate invocation of daemon with the --restart option), it sends a SIGTERM signal to the client. If it was started with the --respawn option, the client process will be restarted after it is terminated by the SIGTERM signal.
  • If the --foreground option was supplied, the client process is run as a foreground process, and is not turned into a daemon at all. If daemon is connected to a terminal, then the client process will also be connected to it. If daemon is not connected to a terminal, but the client needs to be connected to a terminal, use the --pty option.

OPTIONS

Display a help message and exit.
Display a version message and exit.
Set the message verbosity level to level (or 1 if level is not supplied). This only effects the --running and --list options.
Set the debug message level to level (or 1 if level is not supplied). Level 1 traces high-level function calls. Level 2 traces lower-level function calls and shows configuration information. Level 3 adds environment variables. Level 9 adds every return value from select(2). Debug messages are sent to the destination specified by the --dbglog option (by default, the syslog(3) facility, daemon.debug).
Specify the system configuration file to use. By default, /etc/daemon.conf is the system configuration file, if it exists and is not group- or world-writable, and does not exist in a group- or world-writable directory. The configuration file lets you predefine options that apply to all clients, and to specifically named clients.

As well as the system configuration file, additional configuration files will be read from the directory whose path matches the system configuration file with ".d" appended to it (e.g. /etc/daemon.conf.d). Any file in that directory whose name starts with a dot character (".") is ignored. The same checks as described above apply to these files as well.

On BSD systems (except macOS), the system configuration file(s) are /usr/local/etc/daemon.conf and /usr/local/etc/daemon.conf.d/* by default.

On macOS, when installed via macports, the system configuration file(s) are /opt/local/etc/daemon.conf and /opt/local/etc/daemon.conf.d/*.

Bypass the system configuration files, /etc/daemon.conf and /etc/daemon.conf.d/*. Only the user's ~/.daemonrc and ~/.daemonrc.d/* configuration files will be read (if they exist).
Create and lock a pidfile (name.pid), ensuring that only one daemon with the given name is active at the same time. The standard location of the pidfile is /var/run for root (/etc on Solaris, /opt/local/var/run on macOS when installed via macports), and /tmp for normal users. This location can be overridden with the --pidfiles option.

The name may only consist of the following characters:

    -._abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
    

While a named daemon's client process is running, there will also be a separate pidfile to record the process id of the client process. Its filename will be the same as the daemon pidfile's, except that the filename extension will be .clientpid rather than .pid. The only reason that there should be a .pid file, with no .clientpid file, is during the delay between respawn attempts bursts.

Specify the client command as an option. If a command is specified along with its name in the configuration file, then a daemon can be invoked merely by mentioning its name:

    daemon --name ftumch
    

Note: If the client command is specified with the --command option, either in the configuration file, or on the command line, then any additional command line arguments on the daemon command line are appended to the client command that is specified with the --command option.

Override the standard pidfile location. The standard pidfile location is /var/run for root (/etc on Solaris, /opt/local/var/run on macOS when installed via macports), and /tmp for normal users.

This option only affects the --name and --list options. Use this option if these standard locations are unacceptable, but make sure that you don't forget where you put your pidfiles. This option is best used in configuration files, or in shell scripts, rather than on an interactive command line.

The pidfile location will be created automatically only if it is within the user's home directory.

Override the standard pidfile name and location. The standard pidfile location is described immediately above. The standard pidfile name is the argument of the --name option followed by .pid. Use this option if the standard pidfile name and location are unacceptable, but make sure that you don't forget where you put your pidfile. This option is best used in configuration files, or in shell scripts, rather than on an interactive command line.

The pidfile location will be created automatically only if it is within the user's home directory.

Run the client as a different user (and group). This only works for root. If the argument includes a :group specifier, daemon will assume the specified group and no other. Otherwise, daemon will assume all groups that the specified user is in. For backwards compatibility, "." may be used instead of ":" to separate the user and group but since "." can appear in user and group names, ambiguities can arise such as using --user=u.g when users u and u.g and group g all exist. With such an ambiguity, daemon will assume the user u and group g. Use --user=u.g: instead for the other interpretation.
Change the root directory to path before running the client. On some systems, only root can do this. Note that the path to the client program and to the configuration file (if any) must be relative to the new root path.
Change the current directory to path before running the client. The default current directory is the root directory (possibly after chroot).
Change the umask to umask before running the client. umask must be a valid octal mode. The default umask is 022.
Set an environment variable for the client process. This option can be used any number of times. If it is used, only the supplied environment variables are passed to the client process. Otherwise, the client process inherits the current set of environment variables.
Explicitly inherit environment variables. This is only needed when the --env option is used. When this option is used, the --env option adds to the inherited environment, rather than replacing it.
Allow reading an unsafe configuration file, and allow the execution of an unsafe executable. A configuration file or executable is considered to be unsafe if it is group- or world-writable or is in a directory that is group- or world-writable (following symbolic links). If an executable is a script that is interpreted by another executable, then it is considered to be unsafe if the interpreter is unsafe. If the interpreter is /usr/bin/env (with an argument that is a command name to be searched for in $PATH), then that command must be safe. By default, daemon(1) will refuse to read an unsafe configuration file or to execute an unsafe executable when run by root. This option overrides that behaviour and hence should never be used.
Disallow reading an unsafe configuration file, and disallow the execution of an unsafe executable. By default, daemon(1) will allow reading an unsafe configuration file, and allow the execution of an unsafe executable, when run by normal users. This option overrides that behaviour.
Allow the client to create a core file. This should only be used for debugging, as it could lead to security-related information disclosures by daemons run by root.
By default, clients are prevented from creating a core file. If the --core option has been used in a configuration file to apply to all named daemons, then this option can be used to restore the default behaviour for specific named daemons.
Respawn the client when it terminates. Without this option, the termination of a client process causes daemon itself to terminate as well.
Specify the minimum acceptable duration of a client process, in seconds. This option can only be used with the --respawn option. If a client process terminates before this threshold is reached, then it is considered to have failed. The default value is 300 seconds. It cannot be set to less than 10 seconds, except by root when used in conjunction with the --idiot option.
Specify the number of attempts to respawn before delaying. This option can only be used with the --respawn option. The default value is 5. It cannot be set to more than 100 attempts, except by root when used in conjunction with the --idiot option.
Specify the delay in seconds between each burst of respawn attempts. This option can only be used with the --respawn option. The default value is 300 seconds. It cannot be set to less than 10 seconds except by root when used in conjunction with the --idiot option.
Specify a limit to the number of respawn attempt bursts. This option can only be used with the --respawn option. The default value is 0, which means no limit.
Turn on idiot mode in which daemon will not enforce the minimum or maximum values normally imposed on the --acceptable, --attempts and --delay options. The --idiot option must appear before any of these options. Only the root user may use this option, because it can turn a slight misconfiguration into a lot of wasted CPU energy and log messages, somewhat akin to a self-inflicted denial of service.

Idiot mode also allows the root user to expand environment variable notation (e.g. $VAR and ${VAR}) in command line option arguments, and in configuration files. By default, internal environment variable expansion is only performed for normal users. Note that this doesn't apply to any such expansion performed earlier by the shell that invokes daemon(1). See the EXPANSION section below for more details.

Run the client in the foreground. The client is not turned into a daemon.
Connect the client to a pseudo terminal. This option can only be used with the --foreground option. This is the default when the --foreground option is supplied and daemon's standard input is connected to a terminal. This option is only necessary when the client process must be connected to a controlling terminal, but daemon itself has been run without a controlling terminal (e.g. from cron(8) or a pipeline).

If the noecho argument is supplied with this option, the client's side of the pseudo terminal will be set to noecho mode. Use this only if there really is a terminal involved and input is being echoed twice.

Automatically terminate the client process (and daemon(1) itself) as soon as the user has no systemd-logind(8) (or elogind(8)) user sessions. In other words, automatically terminate when the user logs out. If the user has no sessions to start with, the client process will be terminated immediately.

This option is only available on Linux systems that have either systemd(1) (e.g. Debian) or elogind(8) (e.g. Slackware). On systems with systemd(1), you could instead use a systemd user service, particularly if your user account is not allowed to have user services that linger.

Send daemon's standard output and standard error to the syslog destination or file that is specified by spec. If spec is a syslog destination of the form "facility.priority", then output is sent to syslog(3). Otherwise, output is appended to the file whose path is given in spec. By default, output is sent to the syslog destination, daemon.err. See the MESSAGING section below for more details.
Send daemon's debug output to the syslog destination or file that is specified by spec. If spec is a syslog destination of the form "facility.priority", then output is sent to syslog(3). Otherwise, output is appended to the file whose path is given in spec. By default, output is sent to the syslog destination daemon.debug. See the MESSAGING section below for more details.
Capture the client's standard output and standard error, and send it to the syslog destination or file that is specified by spec. If spec is a syslog destination of the form "facility.priority", then output is sent to syslog(3). Otherwise, output is appended to the file whose path is given in spec. By default, output is discarded unless the --foreground option is present, in which case, the client's stdout and stderr are propagated to daemon's stdout and stderr, respectively. See the MESSAGING section below for more details.
Capture the client's standard output, and send it to the syslog destination or file that is specified by spec. If spec is a syslog destination of the form "facility.priority", then output is sent to syslog(3). Otherwise, stdout is appended to the file whose path is given in spec. By default, stdout is discarded unless the --foreground option is present, in which case, the client's stdout is propagated to daemon's stdout. See the MESSAGING section below for more details.
Capture the client's standard error, and send it to the syslog destination or file that is specified by spec. If spec is a syslog destination of the form "facility.priority", then stderr is sent to syslog(3). Otherwise, stderr is appended to the file whose path is given in spec. By default, stderr is discarded unless the --foreground option is present, in which case, the client's stderr is propagated to daemon's stderr. See the MESSAGING section below for more details.
After receiving a SIGCHLD signal due to a stopped or restarted client process, don't bother reading the client's output until the end-of-file is reached before reaping the client process's termination status with wait(2). Normally, there will be little or no output after the SIGCHLD signal, because the client process has just terminated. However, the client process might have its own child processes keeping its output open long after its own termination. When this happens, by default, the client process remains as a zombie process until its child processes terminate and close the output. Waiting for the client's child processes to terminate before considering the client stopped, and before restarting a new invocation, might be desirable. If not, this option can be used to consider the client process as being terminated as soon as the SIGCHLD signal has been received, and reaping its termination status with wait(2) immediately.
After receiving a SIGCHLD signal due to a stopped or restarted client process, continue reading the client's output until the end-of-file is reached before reaping the client process's termination status with wait(2). This is the default behaviour. Normally, there will be little or no output after the SIGCHLD signal, because the client process has just terminated. However, the client process might have its own child processes keeping its output open long after its own termination. When this happens, the client process remains as a zombie process until its child processes terminate and close the output. Waiting for the client's child processes to terminate before considering the client stopped, and before restarting a new invocation, might be desirable. If so, but the --ignore-eof option has been used in a configuration file to apply to all named daemons, then this option can be used to restore the default behaviour for specific named daemons.
Check whether or not a named daemon is running, then exit(3) with EXIT_SUCCESS if the named daemon is running or EXIT_FAILURE if it isn't.

If the --verbose option is supplied, print a message before exiting. If both the named daemon and its client process are running, the output will look like this, showing both process IDs:

    daemon:  name is running (pid 7455) (clientpid 7457)
    

If the named daemon is running but its client process is not (there might be a delay between respawn attempt bursts), the output will look like this, showing only the daemon process's ID:

    daemon:  name is running (pid 7455) (client is not running)
    

If the named daemon is not running at all, the output will look like this:

    daemon:  name is not running
    

This option can only be used with the --name option. Note that the --chroot, --user, --name, --pidfiles and --pidfile (and possibly --config) options must be the same as for the target daemon.

Instruct a named daemon to terminate and restart its client process, by sending it a SIGUSR1 signal. This will cause the named daemon to send its client process a SIGTERM signal to stop it. If the named daemon had been started with the --restart option, the named daemon will then restart its client process. Otherwise, this has the same effect as the --stop option, and the named daemon's client process is not restarted.

This option can only be used with the --name option. Note that the --chroot, --user, --name, --pidfiles and --pidfile (and possibly --config) options must be the same as for the target daemon.

Stop a named daemon by sending it a SIGTERM signal. This will cause the named daemon to send its client process a SIGTERM option and then exit.

This option can only be used with the --name option. Note that the --chroot, --user, --name, --pidfiles and --pidfile (and possibly --config) options must be the same as for the target daemon.

Send the given signal to a named daemon's client process. The signal can be specified either by number or by name (with or without the "sig" prefix). Any signal may be sent. However, the named daemon's client process might be ignoring some signals. For example, SIGHUP will be ignored by default unless the client process has installed a signal handler for it.

The known list of signals are: hup, int, quit, ill, trap, abrt, iot, bus, fpe, kill, usr1, segv, usr2, pipe, alrm, term, stkflt, cld, chld, cont, stop, tstp, ttin, ttou, urg, xcpu, xfsz, vtalrm, prof, winch, poll, io, pwr, sys, emt and info. Not all of them are available on all platforms.

Print a list of the currently running named daemons whose pidfiles are in the applicable pidfile directory which will either be the default (i.e. /var/run for root (/etc on Solaris, /opt/local/var/run on macOS when installed via macports), and /tmp for normal users), or it will be specified by the --pidfiles option. Then exit.

Without the --verbose option, this will only list the names of daemons whose pidfiles are locked, as this implies that the corresponding daemon must still be running. Note that pidfiles for daemons that were not started by daemon(1) might not be locked. An unlocked pidfile might indicate that daemon(1) has died unexpectedly, or it might just be a pidfile for a daemon that was not started by daemon(1). If this might lead to confusion, you might want to consider using a dedicated pidfiles directory for named daemons started by daemon(1), and leave the default pidfiles directories for other daemons that were started independently of daemon(1).

With the --verbose option, the items in the list will look like the output of the --running option with --verbose, but with more detail.

If there are no pidfiles at all, the output will look like this:

    No named daemons are running
    

If a pidfile is locked, and there is a corresponding client pidfile, that indicates that the named daemon and its client are both running, and the output will look like this, showing both process IDs:

    name is running (pid ####) (client pid ####)
    

If a pidfile is locked, but there is no client pidfile, that indicates that the named daemon is running, but its client is not (e.g. during a delay between respawn attempt bursts when the client is failing to start successfully), and the output will look like one of the following three options:

When we can tell that the pidfile is for a process whose executable name is daemon:

    name is running (pid ####) (client is not running)
    

When we can tell that the pidfile is for a process whose executable name is something other than daemon (i.e. is independent of daemon(1)):

    name is running (pid ####) (independent)
    

When it's not possible to determine the name of the executable associated with the pidfile (i.e. On systems other than Linux without a /proc file system):

    name is running (pid ####) (client is not running or is independent)
    

If a pidfile is not locked, and the applicable pidfiles directory is the default, that indicates either that the daemon has unexpectedly terminated, or just that the pidfile is for a daemon that was not started by daemon(1), and the output will look like this:

    name is not running (or is independent)
    

If a pidfile is not locked, and the applicable pidfiles directory is not the default, then it is assumed that all pidfiles are for daemons that were started by daemon(1), and the output will look like this:

    name is not running
    

As with all other programs, a -- argument signifies the end of options. Any options that appear on the command line after -- are part of the client command.

EXPANSION

Some simple shell-like expansion is performed internally on the arguments of the command line options with a text argument (but not the options with a numeric argument).

Environment variable notation, such as $VAR or ${VAR}, is expanded. Then user home directory notation, such as ~ or ~user, is expanded. File name expansion (i.e. globbing) is NOT performed internally. Neither are any of your login shell's other wonderful expansions. This is very basic.

This might not be of much use on the command line, since daemon is normally invoked via a shell, which will first perform all of its usual expansions. It might even be undesirable to perform expansion internally after the shell has already done so (e.g. if you refer to any directory names that actually contain the '$' character, or if you use any environment variables whose values contain the '$' character, which is unlikely).

But it can be useful in configuration files. See the FILES section below for more details. It can also be useful when daemon is invoked directly by another program without the use of a shell.

By default, environment variable expansion is not performed for the root user, even if the environment variable was defined in the configuration files. The --idiot option can be used to change this behaviour, and allow the expansion of environment variables for the root user. Home directory notation expansion is performed for all users.

FILES

/etc/daemon.conf, /etc/daemon.conf.d/* - system-wide default options

/usr/local/etc/daemon.conf, /usr/local/etc/daemon.conf.d/* - system-wide default options on BSD systems (except macOS).

/opt/local/etc/daemon.conf, /opt/local/etc/daemon.conf.d/* - system-wide default options on macOS when installed via macports.

~/.daemonrc, ~/.daemonrc.d/* - user-specific default options

Each line of the configuration file is either an environment variable definition, or a configuration directive.

Environment variable definitions consist of the variable name, followed immediately by '=' and the value of the variable. They look like they do in shell, except that there is no quoting or other shell syntax. Environment variable values can include simple environment variable notation (e.g. $VAR or ${VAR}), and user home directory notation (e.g. ~ or ~user). These will be expanded internally by daemon. See the EXPANSION section above for more details.

Note that any environment variables that are defined in the configuration file, which are subsequently used explicitly in another environment variable definition or in an option argument, will have these expansions performed multiple times. Avoid environment variables whose values can change again if expansion is performed multiple times.

Example:

    PATH=/usr/bin:/usr/sbin:$HOME/bin:~app/bin
    PIDFILES=~/.run

Configuration directives consist of a client name (for options that apply to a single client), or '*' (for generic options that apply to all clients), followed by spaces and/or tabs, followed by a comma-separated list of options. Any option arguments must not contain any commas. The commas that separate options can have spaces and tabs before and after them. Option arguments that are text (but not numbers) can include simple environment variable notation (e.g. $VAR or ${VAR}), and user home directory notation (e.g. ~ or ~user). These will be expanded internally by daemon. See the EXPANSION section above for more details.

Blank lines and comments ('#' to end of the line) are ignored. Lines can be continued with a '\' character at the end of the line.

Example:

    *       errlog=daemon.err,output=local0.err,core
    test1   syslog=local0.debug,debug=9,verbose=9,respawn
    test2   syslog=local0.debug,debug=9, \
            verbose=9,respawn, \
            pidfiles=$PIDFILES

The command line options are processed first, to look for a --config option. If no --config option was supplied, the default configuration files, /etc/daemon.conf and /etc/daemon.conf.d/*, are used. On BSD systems (except macOS), the default configuration files are /usr/local/etc/daemon.conf and /usr/local/etc/daemon.conf.d/*. On macOS when installed via macports, the default configuration files are /opt/local/etc/daemon.conf and /opt/local/etc/daemon.conf.d/*. If the user has their own configuration files, ~/.daemonrc and ~/.daemonrc.d/*, they are also used.

If the configuration files contain any generic ('*') entries, their options are applied in order of appearance. If the --name option was supplied, and the configuration files contain any entries for the given name, those options are then applied in order of appearance.

Finally, the command line options are applied again. This ensures that any generic options apply to all clients by default. Client-specific options override generic options. User options override system-wide options. Command line options override everything else.

Note that the configuration files are not opened and read until after any --chroot and/or --user command line options are processed. This means that the configuration file paths and the client's file path must be relative to the --chroot argument. It also means that the configuration files and the client executable must be readable/executable by the user specified by the --user argument. It also means that the --chroot and --user options must not appear in the configuration file. Also note that the --name option must not appear on the right hand side in the configuration file either.

MESSAGING

The --errlog, --dbglog, --output, --stdout and --stderr options all take an argument that can be either a syslog destination of the form "facility.priority" or the path to a file. Here are the lists of syslog facilities and priorities:

  Facilities:
  kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron,
  local0, local1, local2, local3, local4, local5, local6, local7.
  Priorities:
  emerg, alert, crit, err, warning, notice (on some systems), info, debug.

If the path to a file is supplied instead, bear in mind the fact that daemon(1) changes to the root directory by default, and so the file path should be an absolute path (or relative to the --chroot and/or --chdir option argument). Otherwise, daemon(1) will attempt to create the file relative to its current directory. You might not have permissions to do that, or want to even if you do.

CAVEAT

Clients can only be restarted if they were started with the --respawn option. Using --restart on a non-respawning daemon client is equivalent to using --stop. If you try to restart a named daemon, and it stops instead, then it probably wasn't started with the --respawn option.

Clients that are run in the foreground with a pseudo terminal don't respond to job control (i.e. suspending with Control-Z doesn't work). This is because the client belongs to an orphaned process group (it starts in its own process session), so the kernel won't send it SIGSTOP signals. However, if the client is a shell that supports job control, then its subprocesses can be suspended.

In KDE, if you use "exec daemon" (or just "exec" without daemon) in a shell, to run a KDE application, you might find that the KDE application sometimes doesn't run. This problem has only been seen with konsole(1), but it might happen with other KDE applications as well. Capturing the standard error of the KDE application might show something like:

  unnamed app(9697): KUniqueApplication: Registering failed!
  unnamed app(9697): Communication problem with  "konsole" , it probably crashed.
  Error message was:  "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name
                      org.kde.konsole was not provided by any .service files"

A workaround seems to be to delay the termination of the initial daemon(1) process by at least 0.4 seconds. To make this happen, set the environment variable DAEMON_INIT_EXIT_DELAY_MSEC to the number of milliseconds by which to delay. For example: DAEMON_INIT_EXIT_DELAY_MSEC=400. Or you could just avoid using exec when starting KDE applications.

On Linux systems that have systemd(1) or elogind(8), you might find that your daemon processes and their client processes are terminated when you logout, even though they are in a different process session, and so should be unaffected. This is because systemd has the ability to terminate all of your processes when you logout. Luckily, this feature is turned off by default in some Linux distributions. However, if it is on, you can turn it off by adding the following line to /etc/systemd/logind.conf (or /etc/elogind/logind.conf):

  KillUserProcesses=no

SEE ALSO

libslack(3), daemon(3), coproc(3), pseudo(3), init(8), inetd(8), fork(2), umask(2), setsid(2), chdir(2), chroot(2), setrlimit(2), setgid(2), setuid(2), setgroups(2), initgroups(3), syslog(3), kill(2), wait(2), systemd-logind(8), elogind(8)

AUTHOR

20230824 raf <raf@raf.org>

20230824 daemon-0.8.4