NAME¶

perlpanel-applet-howto - explains how to write applets for the PerlPanel

EXAMPLE¶

        # declare our package:
        package PerlPanel::Applet::HelloWorld;
        # constructor:
        sub new {
                my $self                = {};
                $self->{package}        = shift;
                bless($self, $self->{package});
                return $self;
        }
        # build the widget:
        sub configure {
                my $self = shift;
                $self->{widget} = Gtk2::Button->new('Click Me!');
                $self->widget->signal_connect(
                        'clicked',
                        sub {
                                PerlPanel::alert(
                                        'Hello World!'
                                );
                        }
                );
                $self->widget->show_all;
        }
        # return the widget;
        sub widget {
                return $_[0]->{widget};
        }
        # return the expand (1 or 0) for packing:
        sub expand {
                return 0;
        }
        # return the fill (1 or 0) for packing:
        sub fill {
                return 0;
        }
        # return 'start' or 'end':
        sub end {
                return 'start';
        }
        sub get_default_config {
                my $hashref = {
                        name    => 'value',
                        'foo'   => 'bar',
                        'list'  => [1, 2, 3, 4, 5],
                };
                return $hashref;
        }
        1;

INTRODUCTION¶

It is very easy to write applets for the PerlPanel. Applets are simple Perl objects, and are allowed to do anything that a normal Gtk2-Perl program might do.

The package name for the applet must be of the form

        PerlPanel::Applet::AppletName

and should have the filename

        AppletName.pm

In order to work properly with the PerlPanel, they need to have an interface the PerlPanel can understand.

When it loads a module, PerlPanel will create a new instance of the applet. It will then call various methods of the object in order to work out what to do with it.

These methods are explained below.

APPLET TYPES¶

Since Version 0.7.0, PerlPanel has supported two applet types: single and multi. Single applets are just like applets developed for older versions of PerlPanel - if more than one instance of the applet was on the panel, then those instances would all use the same set of configuration data.

Multi applets are different. A multi applet can appear several times on the panel, and each instance can have its own configuration settings.

        package PerlPanel::Applet::FooBar;
        use vars qw($MULTI);
        $MULTI = 1;

REQUIRED METHODS¶

        $applet->new

The constructor. The arguments supplied to the constructor vary, depending on whether the applet has been defined as a multi applet or not.

If the $MULTI variable has not been set, then @_ will look like this:

        @_ = ($package);

where $package is a scalar containing the package name of the applet, eg "PerlPanel::Applet:FooBar". If the $MULTI variable is true, then @_ will look like this:

        @_ = ($package, $id);

where $id is a scalar containing the ID of the instance. You must store this ID and use it when you request config data.

        $applet->configure

This stage is intended for the loading of config data, creation of widgets, etc.

        $applet->widget

This method should return the Gtk widget that is to be displayed on the panel. It can be any kind of Gtk widget apart from a window.

        $applet->expand
        $applet->fill

The panel uses a horizontal packing box to contain the applet widgets. These two methods return integer values for the 'expand' and 'fill' arguments to "pack_start()".

        $applet->get_default_config

This method returns a reference to a hash containing the default configuration data. This data is imported into the user's config file and is saved to disk and can then be modified by the user as needed. It is only called once - the first time the applet is loaded, after which the panel will use the data from the user's config file.

If this methods returns "undef" then the panel will assume there is no configuration data.

NB: The "end()" function is now deprecated and does not need to be used in new applets.

HISTORICAL NOTE¶

The following sections describe the variables and functions that PerlPanel provides that make applet writing easier. Prior to version 0.4.0, the functions below were accessed using the form

        $PerlPanel::OBJECT_REF->function_name

As of version 0.4.0, the syntax is

        PerlPanel::function_name

Compatibility with the old syntax was removed in version 0.7.0.

USEFUL VARIABLES¶

You can access the following variables in your code that give you access to the internal guts of the panel:

        $PerlPanel::OBJECT_REF

This is a reference to the main panel object. A number of methods are available for your use, they're explained below.

        @PerlPanel::APPLET_DIRS

This contains directory paths which PerlPanel will use to search for applets. It will at least contain "$PREFIX/lib/perlpanel/PerlPanel/Applet" and "$HOME/.perlpanel/applets".

USEFUL FUNCTIONS¶

        PerlPanel::get_config($appletname, [$id])

This function returns a reference containing the configuration data for the applet. The structure of the data will be that defined by the "get_default_config" function.

If you supply the second $id argument, then the function will return the appropriate config data for the instance of the applet defined by $id.

        PerlPanel::tips()

This returns a "Gtk2::Tooltips" object ready for use. In versions prior to 0.4.0, this was accessed using $PerlPanel::TOOLTIPS_REF.

        PerlPanel::icon()

This returns a GdkPixbuf object containing the PerlPanel icon. You should use this pixbuf to set the icon for any windows you create, eg:

        $dialog->set_icon(PerlPanel::icon);

You don't need to resize the pixbuf, this is done when the application (a window manager, or task list) requires it.

        PerlPanel::icon_size()

The size of icons on the panel, in pixels. You should use this to scale things so that everything fits nicely together.

        PerlPanel::screen_width
        PerlPanel::screen_height

These two methods return the width and height (in pixels) of the default display. PerlPanel attempts to work this out if the system's Gtk+ is recent enough (ie later than 2.2.0), otherwise it will take them from the output of the xdpyinfo(1) program.

        PerlPanel::position

This returns the panel's physical position on-screen, either 'top' or 'bottom'. This is useful for when you want to show popup menus from your applets (for an example, see the BBMenu applet), and need to know the position of the panel.

        PerlPanel::save_config

This tells the panel to save its configuration data to the resource file.

        PerlPanel::shutdown

This tells the panel to save its config file to disk and exit.

        PerlPanel::request_string($message, $callback)

This is a clone of the request_string method from the Gnome libs, so that PerlPanel isn't dependent on Gnome being installed. It prompts the user for a string using $message, and executes $callback when the user presses 'Ok' or hits the Enter key. The callback's $_[0] will contain the supplied string.

        PerlPanel::request_password($message, $callback)

As above, except the entry widget will not show the entered characters.

        PerlPanel::question($message, $ok_callback,
                $cancel_callback)

This prompts the user to answer a Yes/No type question. $ok_callback is executed when the user hits 'Ok'. Working out what happens when the user hits 'Cancel' is left as an exercise for the reader.

        PerlPanel::error($message, $ok_callback)

This pops up a dialog with an error icon and the given message. $ok_callback is executed if the user hits the 'Ok' button.

        PerlPanel::warning($message, $ok_callback)

This pops up a dialog with a warning icon (less severe than an error) and the given message. $ok_callback is executed if the user hits the 'Ok' button.

        PerlPanel::notify($message, $ok_callback)

This pops up a dialog with a information icon and the given message. $ok_callback is executed if the user hits the 'Ok' button.

        PerlPanel::get_widget_position($widget)

This returns two numbers corresponding to the position on-screen of the top-left corner of $widget. This means that $widget must be visible on screen.

        PerlPanel::get_mouse_pointer

This returns two numbers corresponding to the position on-screen of the mouse pointer.

        PerlPanel::exec_wait($cmd, $callback)

This function allows you to execute a command and wait for it to finish, without interrupting the Gtk main loop, and without inducing unneeded CPU load with a custom "while()" loop. The command contained in $cmd is opened as a filehandle - so calling applications which detach from STDOUT are not recommended. "exec_wait" creates a Glib handler and waits for "eof" from the handle. Then it executes the function in $callback.

This function exists mainly because the 'IconBar' applet needs a way to wait for the desktop entry editor to close.

        PerlPanel::load_glade($name);

This returns a "Gtk2::GladeXML" object. PerlPanel scans two directories looking for a file named "$name.glade":

        $HOME/.local/share/perlpanel/glade
        $PREFIX/share/perlpanel/glade

or returns undef if it can't find anything. This is a keyboard-plastic saving utility only, and doesn't do anything else.

        PerlPanel::has_application_menu

Returns a true value if an application launcher menu (BBMenu for example) is present in the user's applet list.

        PerlPanel::has_action_menu

Returns a true value if an ActionMenu applet is in the user's applet list.

        PerlPanel::has_pager

Returns a true value if an Pager applet is in the user's applet list.

        PerlPanel::lookup_icon($icon);

This is a convenience function that wraps Gtk2::IconTheme. The $icon argument is the name of a program or similar. This function will return a filename or "undef" if unsuccessful.

        PerlPanel::remove_applet($appletname, $id);

This method is only useful to multi applets. It tells PerlPanel to remove the $id instance of the $appletname applet from the panel. This is useful for when you want to provide a "remove" option in a context menu.

        PerlPanel::launch($command, $notification);

This command provides a wrapper to the "system()" function, with additional support for the Startup Notification specification. When $notification is defined, then the user is given visible feedback that the application is being launched. Once the application has started (and identified itself to the panel), or a certain period of time has elapsed, the feedback is cancelled.

INTERNATIONALISATION SUPPORT¶

PerlPanel has support for foreign languages, using the "Locale::gettext" module. PerlPanel provides a special function for retrieving a translation of a string:

        $translated = _($original, %params);

$original is the original, presumably English, string. Any occurances of the keys of %params are replaced with their values, for example:

        $translated = _(
                "there are {number} {type} {object}",
                number  => 6,
                type    => 'red',
                object  => 'apples'
        );

Applet authors are encouraged to wrap all the strings they use in their applets in "_()".

WRITING MENU APPLETS¶

PerlPanel provides an easy-to-use base menu class for creating menu applets. Consult PerlPanel::MenuBase for more information.

MANAGING TIMEOUTS¶

The use of Glib timeouts (as described in Glib::MainLoop) requires careful consideration for PerlPanel. Applet objects and widgets may be created and destroyed many times during the lifetime of the PerlPanel process. If these applets make use of a timeout, and that timeout is not properly managed, then over time a large amount of CPU time may be used up by timeouts that were created by applets that are no longer in use.

PerlPanel has a system to track timeouts created by applets, and to remove them when the panel is reloaded, or when a particular applet is removed from the panel. Instead of using "Glib::Timeout->add($msec, $callback)" to set up your applet, use the following function:

        $id = PerlPanel::add_timeout($msec, $callback);

The arguments and return values for this function are identical to those of "Glib::Timeout->add()". When the panel is reloaded, all the applets are removed and new ones are created, so the panel will automatically clean up these timeouts.

When you want to cancel a timeout, use this function:

        PerlPanel::remove_timeout($id);

When the code in $callback is executed, it will receive a reference to a scalar containing the ID as the first member of @_. So if you want to cancel the timeout from within the callback, you can call write like this:

        PerlPanel::remove_timeout(${shift()});

PACKAGING YOUR APPLET¶

To create an applet package that a user can install without root access, you need to create a gzipped tar archive, with the name "AppletName-$Version.tar.gz", that has the following layout:

        /
        /applet.info
        /applets
        /applets/AppletName.pm
        /share
        /share/icons
        /share/icons/hicolor
        /share/icons/hicolor/48x48
        /share/icons/hicolor/48x48/apps
        /share/icons/hicolor/48x48/apps/perlpanel-applet-appletname.png
        /share/icons/hicolor/48x48/apps/perlpanel-applet-appletname-action-specific-icon.png
        /share/perlpanel
        /share/perlpanel/glade
        /share/perlpanel/glade/appletname.glade

The "applet.info" file should contain a single line of the form:

        AppletName:A short description of what your applet does.:Category

This line is appended to the user's applet.registry, so they see a descriptive entry in the Add Applet dialog. The first field must match the "AppletName" part of the tarball's name.

The $Version part of the file name should contain only digits and periods. Valid version strings include: 1.00 (Perl style), 1.0.0 (Kernel style), and so on.

The .pm file which contains your applet should go into "applets/". The installer will look for a file called "AppletName.pm", where "AppletName" is taken from the "AppletName" part of the tarball's name. PerlPanel will place this file into "$HOME/.perlpanel/applets".

The files inside the "share/" subdirectory are installed into "$HOME/.local/share". This is a directory defined by the Freedesktop.org base directory specification as the place in which user specific data files should be stored. You can use this subdirectory to install Glade files (which can be accessed using "load_glade()" - see above), your applet's icon, and any supporting icons you may need. Using this path means that calls to "lookup_icon" will work out the same as if the icons were in "$PREFIX/share/icons", and can also be themed.

For example, if your applet controls a media player, and you want to include icons for the Previous, Forward, Play and Pause buttons, you can include these icons like this:

        /share/icons/hicolor/48x48/apps/perlpanel-applet-mediaplayer-previous.png
        /share/icons/hicolor/48x48/apps/perlpanel-applet-mediaplayer-next.png
        /share/icons/hicolor/48x48/apps/perlpanel-applet-mediaplayer-play.png
        /share/icons/hicolor/48x48/apps/perlpanel-applet-mediaplayer-pause.png
        /share/icons/hicolor/48x48/apps/perlpanel-applet-mediaplayer-stop.png

And then in your applet code, you can retrieve these icons by using this:

        my $pbf = PerlPanel::lookup_icon('mediaplayer-previous', PerlPanel::icon_size);

FURTHER CONSIDERATIONS¶

Please try to keep the external dependencies of your applet to a minimum. Remember that your applet may get installed on systems that have a very different set of applications installed on them. And never, ever hard-code paths to files you depend on.

For example, this is very bad:

        my $executable = '/usr/bin/executable';

If the user doesn't have the "executable" program, they may install it from source, in which case it will probably end up in "/usr/local/bin", and your applet will break for no reason.

A much better solution is to do this:

        chomp(my $executable = `which executable 2>/dev/null`);
        if (!-x $executable) {
                PerlPanel::warning(_('Cannot find the {program} program!', program => 'executable'));
        }

This will allow "executable" to be anywhere in the user's path, and will alert the user if there was a problem.

Another area where this can cause problems is the use of external shared files, such as graphics and icons. Wherever possible, package shared files in your tarball as shown in "PACKAGING YOUR APPLET".

AUTHOR¶

Gavin Brown <gavin.brown@uk.com>.