table of contents
util_twi(3avr) | avr-libc | util_twi(3avr) |
NAME¶
util_twi - <util/twi.h>: TWI bit mask definitions
SYNOPSIS¶
TWSR values¶
Mnemonics:
TW_MT_xxx - master transmitter
TW_MR_xxx - master receiver
TW_ST_xxx - slave transmitter
TW_SR_xxx - slave receiver
#define TW_START 0x08
#define TW_REP_START 0x10
#define TW_MT_SLA_ACK 0x18
#define TW_MT_SLA_NACK 0x20
#define TW_MT_DATA_ACK 0x28
#define TW_MT_DATA_NACK 0x30
#define TW_MT_ARB_LOST 0x38
#define TW_MR_ARB_LOST 0x38
#define TW_MR_SLA_ACK 0x40
#define TW_MR_SLA_NACK 0x48
#define TW_MR_DATA_ACK 0x50
#define TW_MR_DATA_NACK 0x58
#define TW_ST_SLA_ACK 0xA8
#define TW_ST_ARB_LOST_SLA_ACK 0xB0
#define TW_ST_DATA_ACK 0xB8
#define TW_ST_DATA_NACK 0xC0
#define TW_ST_LAST_DATA 0xC8
#define TW_SR_SLA_ACK 0x60
#define TW_SR_ARB_LOST_SLA_ACK 0x68
#define TW_SR_GCALL_ACK 0x70
#define TW_SR_ARB_LOST_GCALL_ACK 0x78
#define TW_SR_DATA_ACK 0x80
#define TW_SR_DATA_NACK 0x88
#define TW_SR_GCALL_DATA_ACK 0x90
#define TW_SR_GCALL_DATA_NACK 0x98
#define TW_SR_STOP 0xA0
#define TW_NO_INFO 0xF8
#define TW_BUS_ERROR 0x00
#define TW_STATUS_MASK
#define TW_STATUS (TWSR & TW_STATUS_MASK)
R/~W bit in SLA+R/W address field.¶
#define TW_READ 1
#define TW_WRITE 0
Detailed Description¶
#include <util/twi.h>
This header file contains bit mask definitions for use with the AVR TWI interface.
Macro Definition Documentation¶
#define TW_BUS_ERROR 0x00¶
illegal start or stop condition
#define TW_MR_ARB_LOST 0x38¶
arbitration lost in SLA+R or NACK
#define TW_MR_DATA_ACK 0x50¶
data received, ACK returned
#define TW_MR_DATA_NACK 0x58¶
data received, NACK returned
#define TW_MR_SLA_ACK 0x40¶
SLA+R transmitted, ACK received
#define TW_MR_SLA_NACK 0x48¶
SLA+R transmitted, NACK received
#define TW_MT_ARB_LOST 0x38¶
arbitration lost in SLA+W or data
#define TW_MT_DATA_ACK 0x28¶
data transmitted, ACK received
#define TW_MT_DATA_NACK 0x30¶
data transmitted, NACK received
#define TW_MT_SLA_ACK 0x18¶
SLA+W transmitted, ACK received
#define TW_MT_SLA_NACK 0x20¶
SLA+W transmitted, NACK received
#define TW_NO_INFO 0xF8¶
no state information available
#define TW_READ 1¶
SLA+R address
#define TW_REP_START 0x10¶
repeated start condition transmitted
#define TW_SR_ARB_LOST_GCALL_ACK 0x78¶
arbitration lost in SLA+RW, general call received, ACK returned
#define TW_SR_ARB_LOST_SLA_ACK 0x68¶
arbitration lost in SLA+RW, SLA+W received, ACK returned
#define TW_SR_DATA_ACK 0x80¶
data received, ACK returned
#define TW_SR_DATA_NACK 0x88¶
data received, NACK returned
#define TW_SR_GCALL_ACK 0x70¶
general call received, ACK returned
#define TW_SR_GCALL_DATA_ACK 0x90¶
general call data received, ACK returned
#define TW_SR_GCALL_DATA_NACK 0x98¶
general call data received, NACK returned
#define TW_SR_SLA_ACK 0x60¶
SLA+W received, ACK returned
#define TW_SR_STOP 0xA0¶
stop or repeated start condition received while selected
#define TW_ST_ARB_LOST_SLA_ACK 0xB0¶
arbitration lost in SLA+RW, SLA+R received, ACK returned
#define TW_ST_DATA_ACK 0xB8¶
data transmitted, ACK received
#define TW_ST_DATA_NACK 0xC0¶
data transmitted, NACK received
#define TW_ST_LAST_DATA 0xC8¶
last data byte transmitted, ACK received
#define TW_ST_SLA_ACK 0xA8¶
SLA+R received, ACK returned
#define TW_START 0x08¶
start condition transmitted
#define TW_STATUS (TWSR & TW_STATUS_MASK)¶
TWSR, masked by TW_STATUS_MASK
#define TW_STATUS_MASK¶
Value:
The lower 3 bits of TWSR are reserved on the ATmega163. The 2 LSB carry the prescaler bits on the newer ATmegas.
(_BV(TWS7)|_BV(TWS6)|_BV(TWS5)|_BV(TWS4)| _BV(TWS3))
#define TW_WRITE 0¶
SLA+W address
Author¶
Generated automatically by Doxygen for avr-libc from the source code.
Fri Jan 7 2022 | Version 2.0.0 |