Stream specifiers¶

Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to.

A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. "-codec:a:1 ac3" contains the "a:1" stream specifier, which matches the second audio stream. Therefore, it would select the ac3 codec for the second audio stream.

A stream specifier can match several streams, so that the option is applied to all of them. E.g. the stream specifier in "-b:a 128k" matches all audio streams.

An empty stream specifier matches all streams. For example, "-codec copy" or "-codec: copy" would copy all the streams without reencoding.

Possible forms of stream specifiers are:

stream_index

Matches the stream with this index. E.g. "-threads:1 4" would set the thread count for the second stream to 4. If stream_index is used as an additional stream specifier (see below), then it selects stream number stream_index from the matching streams. Stream numbering is based on the order of the streams as detected by libavformat except when a program ID is also specified. In this case it is based on the ordering of the streams in the program.

stream_type[:additional_stream_specifier]

stream_type is one of following: 'v' or 'V' for video, 'a' for audio, 's' for subtitle, 'd' for data, and 't' for attachments. 'v' matches all video streams, 'V' only matches video streams which are not attached pictures, video thumbnails or cover arts. If additional_stream_specifier is used, then it matches streams which both have this type and match the additional_stream_specifier. Otherwise, it matches all streams of the specified type.

p:program_id[:additional_stream_specifier]

Matches streams which are in the program with the id program_id. If additional_stream_specifier is used, then it matches streams which both are part of the program and match the additional_stream_specifier.

#stream_id or i:stream_id

Match the stream by stream id (e.g. PID in MPEG-TS container).

m:key[:value]

Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value.

u

Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present.

Note that in ffmpeg, matching by metadata will only work properly for input files.

Generic options¶

These options are shared amongst the ff* tools.

-L

Show license.

-h, -?, -help, --help [arg]

Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown.

Possible values of arg are:

-version

Show version.

-buildconf

Show the build configuration, one option per line.

-formats

Show available formats (including devices).

-demuxers

Show available demuxers.

-muxers

Show available muxers.

-devices

Show available devices.

-codecs

Show all codecs known to libavcodec.

Note that the term 'codec' is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format.

-decoders

Show available decoders.

-encoders

Show all available encoders.

-bsfs

Show available bitstream filters.

-protocols

Show available protocols.

-filters

Show available libavfilter filters.

-pix_fmts

Show available pixel formats.

-sample_fmts

Show available sample formats.

-layouts

Show channel names and standard channel layouts.

-dispositions

Show stream dispositions.

-colors

Show recognized color names.

-sources device[,opt1=val1[,opt2=val2]...]

Show autodetected sources of the input device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete.

        ffmpeg -sources pulse,server=192.168.0.4
    

-sinks device[,opt1=val1[,opt2=val2]...]

Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete.

        ffmpeg -sinks pulse,server=192.168.0.4
    

-loglevel [flags+]loglevel | -v [flags+]loglevel

Set logging level and flags used by the library.

The optional flags prefix can consist of the following values:

        ffmpeg -loglevel repeat+level+verbose -i input output

        ffmpeg [...] -loglevel +repeat

-report

Dump full command line and log output to a file named "program-YYYYMMDD-HHMMSS.log" in the current directory. This file can be useful for bug reports. It also implies "-loglevel debug".

Setting the environment variable FFREPORT to any value has the same effect. If the value is a ':'-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ':' (see the ``Quoting and escaping'' section in the ffmpeg-utils manual).

The following options are recognized:

        FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output

-hide_banner

Suppress printing banner.

All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information.

-cpuflags flags (global)

Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you're doing.

        ffmpeg -cpuflags -sse+mmx ...
        ffmpeg -cpuflags mmx ...
        ffmpeg -cpuflags 0 ...
    

Possible flags for this option are:

-cpucount count (global)

Override detection of CPU count. This option is intended for testing. Do not use it unless you know what you're doing.

        ffmpeg -cpucount 2
    

-max_alloc bytes

Set the maximum size limit for allocating a block on the heap by ffmpeg's family of malloc functions. Exercise extreme caution when using this option. Don't use if you do not understand the full consequence of doing so. Default is INT_MAX.

AVOptions¶

These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the -help option. They are separated into two categories:

generic

These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs.

private

These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs.

For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2_version private option of the MP3 muxer:

        ffmpeg -i input.flac -id3v2_version 3 out.mp3

All codec AVOptions are per-stream, and thus a stream specifier should be attached to them:

        ffmpeg -i multichannel.mxf -map 0:v:0 -map 0:a:0 -map 0:a:0 -c:a:0 ac3 -b:a:0 640k -ac:a:1 2 -c:a:1 aac -b:2 128k out.mp4

In the above example, a multichannel audio stream is mapped twice for output. The first instance is encoded with codec ac3 and bitrate 640k. The second instance is downmixed to 2 channels and encoded with codec aac. A bitrate of 128k is specified for it using absolute index of the output stream.

Note: the -nooption syntax cannot be used for boolean AVOptions, use -option 0/-option 1.

Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon.

Main options¶

-x width

Force displayed width.

-y height

Force displayed height.

-fs

Start in fullscreen mode.

-an

Disable audio.

-vn

Disable video.

-sn

Disable subtitles.

-ss pos

Seek to pos. Note that in most formats it is not possible to seek exactly, so ffplay will seek to the nearest seek point to pos.

pos must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

-t duration

Play duration seconds of audio/video.

duration must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

-bytes

Seek by bytes.

-seek_interval

Set custom interval, in seconds, for seeking using left/right keys. Default is 10 seconds.

-nodisp

Disable graphical display.

-noborder

Borderless window.

-alwaysontop

Window always on top. Available on: X11 with SDL >= 2.0.5, Windows SDL >= 2.0.6.

-volume

Set the startup volume. 0 means silence, 100 means no volume reduction or amplification. Negative values are treated as 0, values above 100 are treated as 100.

-f fmt

Force format.

-window_title title

Set window title (default is the input filename).

-left title

Set the x position for the left of the window (default is a centered window).

-top title

Set the y position for the top of the window (default is a centered window).

-loop number

Loops movie playback <number> times. 0 means forever.

-showmode mode

Set the show mode to use. Available values for mode are:

-vf filtergraph

Create the filtergraph specified by filtergraph and use it to filter the video stream.

filtergraph is a description of the filtergraph to apply to the stream, and must have a single video input and a single video output. In the filtergraph, the input is associated to the label "in", and the output to the label "out". See the ffmpeg-filters manual for more information about the filtergraph syntax.

You can specify this parameter multiple times and cycle through the specified filtergraphs along with the show modes by pressing the key w.

-af filtergraph

filtergraph is a description of the filtergraph to apply to the input audio. Use the option "-filters" to show all the available filters (including sources and sinks).

-i input_url

Read input_url.

Advanced options¶

-stats

Print several playback statistics, in particular show the stream duration, the codec parameters, the current position in the stream and the audio/video synchronisation drift. It is shown by default, unless the log level is lower than "info". Its display can be forced by manually specifying this option. To disable it, you need to specify "-nostats".

-fast

Non-spec-compliant optimizations.

-genpts

Generate pts.

-sync type

Set the master clock to audio ("type=audio"), video ("type=video") or external ("type=ext"). Default is audio. The master clock is used to control audio-video synchronization. Most media players use audio as master clock, but in some cases (streaming or high quality broadcast) it is necessary to change that. This option is mainly used for debugging purposes.

-ast audio_stream_specifier

Select the desired audio stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" audio stream is selected in the program of the already selected video stream.

-vst video_stream_specifier

Select the desired video stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" video stream is selected.

-sst subtitle_stream_specifier

Select the desired subtitle stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" subtitle stream is selected in the program of the already selected video or audio stream.

-autoexit

Exit when video is done playing.

-exitonkeydown

Exit if any key is pressed.

-exitonmousedown

Exit if any mouse button is pressed.

-codec:media_specifier codec_name

Force a specific decoder implementation for the stream identified by media_specifier, which can assume the values "a" (audio), "v" (video), and "s" subtitle.

-acodec codec_name

Force a specific audio decoder.

-vcodec codec_name

Force a specific video decoder.

-scodec codec_name

Force a specific subtitle decoder.

-autorotate

Automatically rotate the video according to file metadata. Enabled by default, use -noautorotate to disable it.

-framedrop

Drop video frames if video is out of sync. Enabled by default if the master clock is not set to video. Use this option to enable frame dropping for all master clock sources, use -noframedrop to disable it.

-infbuf

Do not limit the input buffer size, read as much data as possible from the input as soon as possible. Enabled by default for realtime streams, where data may be dropped if not read in time. Use this option to enable infinite buffers for all inputs, use -noinfbuf to disable it.

-filter_threads nb_threads

Defines how many threads are used to process a filter pipeline. Each pipeline will produce a thread pool with this many threads available for parallel processing. The default is 0 which means that the thread count will be determined by the number of available CPUs.

While playing¶

q, ESC

Quit.

f

Toggle full screen.

p, SPC

Pause.

m

Toggle mute.

9, 0

/, *

Decrease and increase volume respectively.

a

Cycle audio channel in the current program.

v

Cycle video channel.

t

Cycle subtitle channel in the current program.

c

Cycle program.

w

Cycle video filters or show modes.

s

Step to the next frame.

Pause if the stream is not already paused, step to the next video frame, and pause.

left/right

Seek backward/forward 10 seconds.

down/up

Seek backward/forward 1 minute.

page down/page up

Seek to the previous/next chapter. or if there are no chapters Seek backward/forward 10 minutes.

right mouse click

Seek to percentage in file corresponding to fraction of width.

left mouse double-click

Toggle full screen.

Quoting and escaping¶

FFmpeg adopts the following quoting and escaping mechanism, unless explicitly specified. The following rules are applied:

• ' and \ are special characters (respectively used for quoting and escaping). In addition to them, there might be other special characters depending on the specific syntax where the escaping and quoting are employed.
• A special character is escaped by prefixing it with a \.
• All characters enclosed between '' are included literally in the parsed string. The quote character ' itself cannot be quoted, so you may need to close the quote and escape it.
• Leading and trailing whitespaces, unless escaped or quoted, are removed from the parsed string.

Note that you may need to add a second level of escaping when using the command line or a script, which depends on the syntax of the adopted shell language.

The function "av_get_token" defined in libavutil/avstring.h can be used to parse a token quoted or escaped according to the rules defined above.

The tool tools/ffescape in the FFmpeg source tree can be used to automatically quote or escape a string in a script.

Examples

• Escape the string "Crime d'Amour" containing the "'" special character:

          Crime d\'Amour
      

• The string above contains a quote, so the "'" needs to be escaped when quoting it:

          'Crime d'\''Amour'
      

• Include leading or trailing whitespaces using quoting:

          '  this string starts and ends with whitespaces  '
      

• Escaping and quoting can be mixed together:

          ' The string '\'string\'' is a string '
      

• To include a literal \ you can use either escaping or quoting:

          'c:\foo' can be written as c:\\foo
      

Date¶

The accepted syntax is:

        [(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH:MM:SS[.m...]]])|(HHMMSS[.m...]]]))[Z]
        now

If the value is "now" it takes the current time.

Time is local time unless Z is appended, in which case it is interpreted as UTC. If the year-month-day part is not specified it takes the current year-month-day.

Time duration¶

There are two accepted syntaxes for expressing time duration.

        [-][<HH>:]<MM>:<SS>[.<m>...]

HH expresses the number of hours, MM the number of minutes for a maximum of 2 digits, and SS the number of seconds for a maximum of 2 digits. The m at the end expresses decimal value for SS.

or

        [-]<S>+[.<m>...][s|ms|us]

S expresses the number of seconds, with the optional decimal part m. The optional literal suffixes s, ms or us indicate to interpret the value as seconds, milliseconds or microseconds, respectively.

In both expressions, the optional - indicates negative duration.

Examples

The following examples are all valid time duration:

55

55 seconds

0.2

0.2 seconds

200ms

200 milliseconds, that's 0.2s

200000us

200000 microseconds, that's 0.2s

12:03:45

12 hours, 03 minutes and 45 seconds

23.189

23.189 seconds

Video size¶

Specify the size of the sourced video, it may be a string of the form widthxheight, or the name of a size abbreviation.

The following abbreviations are recognized:

ntsc

720x480

pal

720x576

qntsc

352x240

qpal

352x288

sntsc

640x480

spal

768x576

film

352x240

ntsc-film

352x240

sqcif

128x96

qcif

176x144

cif

352x288

4cif

704x576

16cif

1408x1152

qqvga

160x120

qvga

320x240

vga

640x480

svga

800x600

xga

1024x768

uxga

1600x1200

qxga

2048x1536

sxga

1280x1024

qsxga

2560x2048

hsxga

5120x4096

wvga

852x480

wxga

1366x768

wsxga

1600x1024

wuxga

1920x1200

woxga

2560x1600

wqsxga

3200x2048

wquxga

3840x2400

whsxga

6400x4096

whuxga

7680x4800

cga

320x200

ega

640x350

hd480

852x480

hd720

1280x720

hd1080

1920x1080

2k

2048x1080

2kflat

1998x1080

2kscope

2048x858

4k

4096x2160

4kflat

3996x2160

4kscope

4096x1716

nhd

640x360

hqvga

240x160

wqvga

400x240

fwqvga

432x240

hvga

480x320

qhd

960x540

2kdci

2048x1080

4kdci

4096x2160

uhd2160

3840x2160

uhd4320

7680x4320

Video rate¶

Specify the frame rate of a video, expressed as the number of frames generated per second. It has to be a string in the format frame_rate_num/frame_rate_den, an integer number, a float number or a valid video frame rate abbreviation.

The following abbreviations are recognized:

ntsc

30000/1001

pal

25/1

qntsc

30000/1001

qpal

25/1

sntsc

30000/1001

spal

25/1

film

24/1

ntsc-film

24000/1001

Ratio¶

A ratio can be expressed as an expression, or in the form numerator:denominator.

Note that a ratio with infinite (1/0) or negative value is considered valid, so you should check on the returned value if you want to exclude those values.

The undefined value can be expressed using the "0:0" string.

Color¶

It can be the name of a color as defined below (case insensitive match) or a "[0x|#]RRGGBB[AA]" sequence, possibly followed by @ and a string representing the alpha component.

The alpha component may be a string composed by "0x" followed by an hexadecimal number or a decimal number between 0.0 and 1.0, which represents the opacity value (0x00 or 0.0 means completely transparent, 0xff or 1.0 completely opaque). If the alpha component is not specified then 0xff is assumed.

The string random will result in a random color.

The following names of colors are recognized:

AliceBlue

0xF0F8FF

AntiqueWhite

0xFAEBD7

Aqua

0x00FFFF

Aquamarine

0x7FFFD4

Azure

0xF0FFFF

Beige

0xF5F5DC

Bisque

0xFFE4C4

Black

0x000000

BlanchedAlmond

0xFFEBCD

Blue

0x0000FF

BlueViolet

0x8A2BE2

Brown

0xA52A2A

BurlyWood

0xDEB887

CadetBlue

0x5F9EA0

Chartreuse

0x7FFF00

Chocolate

0xD2691E

Coral

0xFF7F50

CornflowerBlue

0x6495ED

Cornsilk

0xFFF8DC

Crimson

0xDC143C

Cyan

0x00FFFF

DarkBlue

0x00008B

DarkCyan

0x008B8B

DarkGoldenRod

0xB8860B

DarkGray

0xA9A9A9

DarkGreen

0x006400

DarkKhaki

0xBDB76B

DarkMagenta

0x8B008B

DarkOliveGreen

0x556B2F

Darkorange

0xFF8C00

DarkOrchid

0x9932CC

DarkRed

0x8B0000

DarkSalmon

0xE9967A

DarkSeaGreen

0x8FBC8F

DarkSlateBlue

0x483D8B

DarkSlateGray

0x2F4F4F

DarkTurquoise

0x00CED1

DarkViolet

0x9400D3

DeepPink

0xFF1493

DeepSkyBlue

0x00BFFF

DimGray

0x696969

DodgerBlue

0x1E90FF

FireBrick

0xB22222

FloralWhite

0xFFFAF0

ForestGreen

0x228B22

Fuchsia

0xFF00FF

Gainsboro

0xDCDCDC

GhostWhite

0xF8F8FF

Gold

0xFFD700

GoldenRod

0xDAA520

Gray

0x808080

Green

0x008000

GreenYellow

0xADFF2F

HoneyDew

0xF0FFF0

HotPink

0xFF69B4

IndianRed

0xCD5C5C

Indigo

0x4B0082

Ivory

0xFFFFF0

Khaki

0xF0E68C

Lavender

0xE6E6FA

LavenderBlush

0xFFF0F5

LawnGreen

0x7CFC00

LemonChiffon

0xFFFACD

LightBlue

0xADD8E6

LightCoral

0xF08080

LightCyan

0xE0FFFF

LightGoldenRodYellow

0xFAFAD2

LightGreen

0x90EE90

LightGrey

0xD3D3D3

LightPink

0xFFB6C1

LightSalmon

0xFFA07A

LightSeaGreen

0x20B2AA

LightSkyBlue

0x87CEFA

LightSlateGray

0x778899

LightSteelBlue

0xB0C4DE

LightYellow

0xFFFFE0

Lime

0x00FF00

LimeGreen

0x32CD32

Linen

0xFAF0E6

Magenta

0xFF00FF

Maroon

0x800000

MediumAquaMarine

0x66CDAA

MediumBlue

0x0000CD

MediumOrchid

0xBA55D3

MediumPurple

0x9370D8

MediumSeaGreen

0x3CB371

MediumSlateBlue

0x7B68EE

MediumSpringGreen

0x00FA9A

MediumTurquoise

0x48D1CC

MediumVioletRed

0xC71585

MidnightBlue

0x191970

MintCream

0xF5FFFA

MistyRose

0xFFE4E1

Moccasin

0xFFE4B5

NavajoWhite

0xFFDEAD

Navy

0x000080

OldLace

0xFDF5E6

Olive

0x808000

OliveDrab

0x6B8E23

Orange

0xFFA500

OrangeRed

0xFF4500

Orchid

0xDA70D6

PaleGoldenRod

0xEEE8AA

PaleGreen

0x98FB98

PaleTurquoise

0xAFEEEE

PaleVioletRed

0xD87093

PapayaWhip

0xFFEFD5

PeachPuff

0xFFDAB9

Peru

0xCD853F

Pink

0xFFC0CB

Plum

0xDDA0DD

PowderBlue

0xB0E0E6

Purple

0x800080

Red

0xFF0000

RosyBrown

0xBC8F8F

RoyalBlue

0x4169E1

SaddleBrown

0x8B4513

Salmon

0xFA8072

SandyBrown

0xF4A460

SeaGreen

0x2E8B57

SeaShell

0xFFF5EE

Sienna

0xA0522D

Silver

0xC0C0C0

SkyBlue

0x87CEEB

SlateBlue

0x6A5ACD

SlateGray

0x708090

Snow

0xFFFAFA

SpringGreen

0x00FF7F

SteelBlue

0x4682B4

Tan

0xD2B48C

Teal

0x008080

Thistle

0xD8BFD8

Tomato

0xFF6347

Turquoise

0x40E0D0

Violet

0xEE82EE

Wheat

0xF5DEB3

White

0xFFFFFF

WhiteSmoke

0xF5F5F5

Yellow

0xFFFF00

YellowGreen

0x9ACD32

Channel Layout¶

A channel layout specifies the spatial disposition of the channels in a multi-channel audio stream. To specify a channel layout, FFmpeg makes use of a special syntax.

Individual channels are identified by an id, as given by the table below:

FL

front left

FR

front right

FC

front center

LFE

low frequency

BL

back left

BR

back right

FLC

front left-of-center

FRC

front right-of-center

BC

back center

SL

side left

SR

side right

TC

top center

TFL

top front left

TFC

top front center

TFR

top front right

TBL

top back left

TBC

top back center

TBR

top back right

DL

downmix left

DR

downmix right

WL

wide left

WR

wide right

SDL

surround direct left

SDR

surround direct right

LFE2

low frequency 2

Standard channel layout compositions can be specified by using the following identifiers:

mono

FC

stereo

FL+FR

2.1

FL+FR+LFE

3.0

FL+FR+FC

3.0(back)

FL+FR+BC

4.0

FL+FR+FC+BC

quad

FL+FR+BL+BR

quad(side)

FL+FR+SL+SR

3.1

FL+FR+FC+LFE

5.0

FL+FR+FC+BL+BR

5.0(side)

FL+FR+FC+SL+SR

4.1

FL+FR+FC+LFE+BC

5.1

FL+FR+FC+LFE+BL+BR

5.1(side)

FL+FR+FC+LFE+SL+SR

6.0

FL+FR+FC+BC+SL+SR

6.0(front)

FL+FR+FLC+FRC+SL+SR

hexagonal

FL+FR+FC+BL+BR+BC

6.1

FL+FR+FC+LFE+BC+SL+SR

6.1

FL+FR+FC+LFE+BL+BR+BC

6.1(front)

FL+FR+LFE+FLC+FRC+SL+SR

7.0

FL+FR+FC+BL+BR+SL+SR

7.0(front)

FL+FR+FC+FLC+FRC+SL+SR

7.1

FL+FR+FC+LFE+BL+BR+SL+SR

7.1(wide)

FL+FR+FC+LFE+BL+BR+FLC+FRC

7.1(wide-side)

FL+FR+FC+LFE+FLC+FRC+SL+SR

octagonal

FL+FR+FC+BL+BR+BC+SL+SR

hexadecagonal

FL+FR+FC+BL+BR+BC+SL+SR+WL+WR+TBL+TBR+TBC+TFC+TFL+TFR

downmix

DL+DR

22.2

FL+FR+FC+LFE+BL+BR+FLC+FRC+BC+SL+SR+TC+TFL+TFC+TFR+TBL+TBC+TBR+LFE2+TSL+TSR+BFC+BFL+BFR

A custom channel layout can be specified as a sequence of terms, separated by '+'. Each term can be:

•

the name of a single channel (e.g. FL, FR, FC, LFE, etc.), each optionally containing a custom name after a '@', (e.g. FL@Left, FR@Right, FC@Center, LFE@Low_Frequency, etc.)

A standard channel layout can be specified by the following:

• the name of a single channel (e.g. FL, FR, FC, LFE, etc.)
• the name of a standard channel layout (e.g. mono, stereo, 4.0, quad, 5.0, etc.)
• a number of channels, in decimal, followed by 'c', yielding the default channel layout for that number of channels (see the function "av_channel_layout_default"). Note that not all channel counts have a default layout.
• a number of channels, in decimal, followed by 'C', yielding an unknown channel layout with the specified number of channels. Note that not all channel layout specification strings support unknown channel layouts.
• a channel layout mask, in hexadecimal starting with "0x" (see the "AV_CH_*" macros in libavutil/channel_layout.h.

Before libavutil version 53 the trailing character "c" to specify a number of channels was optional, but now it is required, while a channel layout mask can also be specified as a decimal number (if and only if not followed by "c" or "C").

See also the function "av_channel_layout_from_string" defined in libavutil/channel_layout.h.

av1¶

AOMedia Video 1 (AV1) decoder.

Options

operating_point

Select an operating point of a scalable AV1 bitstream (0 - 31). Default is 0.

rawvideo¶

Raw video decoder.

This decoder decodes rawvideo streams.

Options

top top_field_first

Specify the assumed field type of the input video.

libdav1d¶

dav1d AV1 decoder.

libdav1d allows libavcodec to decode the AOMedia Video 1 (AV1) codec. Requires the presence of the libdav1d headers and library during configuration. You need to explicitly configure the build with "--enable-libdav1d".

Options

The following options are supported by the libdav1d wrapper.

framethreads

Set amount of frame threads to use during decoding. The default value is 0 (autodetect). This option is deprecated for libdav1d >= 1.0 and will be removed in the future. Use the global option "threads" instead.

tilethreads

Set amount of tile threads to use during decoding. The default value is 0 (autodetect). This option is deprecated for libdav1d >= 1.0 and will be removed in the future. Use the global option "threads" instead.

filmgrain

Apply film grain to the decoded video if present in the bitstream. Defaults to the internal default of the library. This option is deprecated and will be removed in the future. See the global option "export_side_data" to export Film Grain parameters instead of applying it.

oppoint

Select an operating point of a scalable AV1 bitstream (0 - 31). Defaults to the internal default of the library.

alllayers

Output all spatial layers of a scalable AV1 bitstream. The default value is false.

libdavs2¶

AVS2-P2/IEEE1857.4 video decoder wrapper.

This decoder allows libavcodec to decode AVS2 streams with davs2 library.

libuavs3d¶

AVS3-P2/IEEE1857.10 video decoder.

libuavs3d allows libavcodec to decode AVS3 streams. Requires the presence of the libuavs3d headers and library during configuration. You need to explicitly configure the build with "--enable-libuavs3d".

Options

The following option is supported by the libuavs3d wrapper.

frame_threads

Set amount of frame threads to use during decoding. The default value is 0 (autodetect).

QSV Decoders¶

The family of Intel QuickSync Video decoders (VC1, MPEG-2, H.264, HEVC, JPEG/MJPEG, VP8, VP9, AV1).

Common Options

The following options are supported by all qsv decoders.

async_depth

Internal parallelization depth, the higher the value the higher the latency.

gpu_copy

A GPU-accelerated copy between video and system memory

HEVC Options

Extra options for hevc_qsv.

load_plugin

A user plugin to load in an internal session

load_plugins

A :-separate list of hexadecimal plugin UIDs to load in an internal session

v210¶

Uncompressed 4:2:2 10-bit decoder.

Options

custom_stride

Set the line size of the v210 data in bytes. The default value is 0 (autodetect). You can use the special -1 value for a strideless v210 as seen in BOXX files.

ac3¶

AC-3 audio decoder.

This decoder implements part of ATSC A/52:2010 and ETSI TS 102 366, as well as the undocumented RealAudio 3 (a.k.a. dnet).

AC-3 Decoder Options

-drc_scale value

Dynamic Range Scale Factor. The factor to apply to dynamic range values from the AC-3 stream. This factor is applied exponentially. The default value is 1. There are 3 notable scale factor ranges:

flac¶

FLAC audio decoder.

This decoder aims to implement the complete FLAC specification from Xiph.

FLAC Decoder options

-use_buggy_lpc

The lavc FLAC encoder used to produce buggy streams with high lpc values (like the default value). This option makes it possible to decode such streams correctly by using lavc's old buggy lpc logic for decoding.

ffwavesynth¶

Internal wave synthesizer.

This decoder generates wave patterns according to predefined sequences. Its use is purely internal and the format of the data it accepts is not publicly documented.

libcelt¶

libcelt decoder wrapper.

libcelt allows libavcodec to decode the Xiph CELT ultra-low delay audio codec. Requires the presence of the libcelt headers and library during configuration. You need to explicitly configure the build with "--enable-libcelt".

libgsm¶

libgsm decoder wrapper.

libgsm allows libavcodec to decode the GSM full rate audio codec. Requires the presence of the libgsm headers and library during configuration. You need to explicitly configure the build with "--enable-libgsm".

This decoder supports both the ordinary GSM and the Microsoft variant.

libilbc¶

libilbc decoder wrapper.

libilbc allows libavcodec to decode the Internet Low Bitrate Codec (iLBC) audio codec. Requires the presence of the libilbc headers and library during configuration. You need to explicitly configure the build with "--enable-libilbc".

Options

The following option is supported by the libilbc wrapper.

enhance

Enable the enhancement of the decoded audio when set to 1. The default value is 0 (disabled).

libopencore-amrnb¶

libopencore-amrnb decoder wrapper.

libopencore-amrnb allows libavcodec to decode the Adaptive Multi-Rate Narrowband audio codec. Using it requires the presence of the libopencore-amrnb headers and library during configuration. You need to explicitly configure the build with "--enable-libopencore-amrnb".

An FFmpeg native decoder for AMR-NB exists, so users can decode AMR-NB without this library.

libopencore-amrwb¶

libopencore-amrwb decoder wrapper.

libopencore-amrwb allows libavcodec to decode the Adaptive Multi-Rate Wideband audio codec. Using it requires the presence of the libopencore-amrwb headers and library during configuration. You need to explicitly configure the build with "--enable-libopencore-amrwb".

An FFmpeg native decoder for AMR-WB exists, so users can decode AMR-WB without this library.

libopus¶

libopus decoder wrapper.

libopus allows libavcodec to decode the Opus Interactive Audio Codec. Requires the presence of the libopus headers and library during configuration. You need to explicitly configure the build with "--enable-libopus".

An FFmpeg native decoder for Opus exists, so users can decode Opus without this library.

libaribb24¶

ARIB STD-B24 caption decoder.

Implements profiles A and C of the ARIB STD-B24 standard.

libaribb24 Decoder Options

-aribb24-base-path path

Sets the base path for the libaribb24 library. This is utilized for reading of configuration files (for custom unicode conversions), and for dumping of non-text symbols as images under that location.

Unset by default.

-aribb24-skip-ruby-text boolean

Tells the decoder wrapper to skip text blocks that contain half-height ruby text.

Enabled by default.

dvbsub¶

Options

compute_clut

dvb_substream

Selects the dvb substream, or all substreams if -1 which is default.

dvdsub¶

This codec decodes the bitmap subtitles used in DVDs; the same subtitles can also be found in VobSub file pairs and in some Matroska files.

Options

palette

Specify the global palette used by the bitmaps. When stored in VobSub, the palette is normally specified in the index file; in Matroska, the palette is stored in the codec extra-data in the same format as in VobSub. In DVDs, the palette is stored in the IFO file, and therefore not available when reading from dumped VOB files.

The format for this option is a string containing 16 24-bits hexadecimal numbers (without 0x prefix) separated by commas, for example "0d00ee, ee450d, 101010, eaeaea, 0ce60b, ec14ed, ebff0b, 0d617a, 7b7b7b, d1d1d1, 7b2a0e, 0d950c, 0f007b, cf0dec, cfa80c, 7c127b".

ifo_palette

Specify the IFO file from which the global palette is obtained. (experimental)

forced_subs_only

Only decode subtitle entries marked as forced. Some titles have forced and non-forced subtitles in the same track. Setting this flag to 1 will only keep the forced subtitles. Default value is 0.

libzvbi-teletext¶

Libzvbi allows libavcodec to decode DVB teletext pages and DVB teletext subtitles. Requires the presence of the libzvbi headers and library during configuration. You need to explicitly configure the build with "--enable-libzvbi".

Options

txt_page

List of teletext page numbers to decode. Pages that do not match the specified list are dropped. You may use the special "*" string to match all pages, or "subtitle" to match all subtitle pages. Default value is *.

txt_default_region

Set default character set used for decoding, a value between 0 and 87 (see ETS 300 706, Section 15, Table 32). Default value is -1, which does not override the libzvbi default. This option is needed for some legacy level 1.0 transmissions which cannot signal the proper charset.

txt_chop_top

Discards the top teletext line. Default value is 1.

txt_format

Specifies the format of the decoded subtitles.

txt_left

X offset of generated bitmaps, default is 0.

txt_top

Y offset of generated bitmaps, default is 0.

txt_chop_spaces

Chops leading and trailing spaces and removes empty lines from the generated text. This option is useful for teletext based subtitles where empty spaces may be present at the start or at the end of the lines or empty lines may be present between the subtitle lines because of double-sized teletext characters. Default value is 1.

txt_duration

Sets the display duration of the decoded teletext pages or subtitles in milliseconds. Default value is -1 which means infinity or until the next subtitle event comes.

txt_transparent

Force transparent background of the generated teletext bitmaps. Default value is 0 which means an opaque background.

txt_opacity

Sets the opacity (0-255) of the teletext background. If txt_transparent is not set, it only affects characters between a start box and an end box, typically subtitles. Default value is 0 if txt_transparent is set, 255 otherwise.

aac_adtstoasc¶

Convert MPEG-2/4 AAC ADTS to an MPEG-4 Audio Specific Configuration bitstream.

This filter creates an MPEG-4 AudioSpecificConfig from an MPEG-2/4 ADTS header and removes the ADTS header.

This filter is required for example when copying an AAC stream from a raw ADTS AAC or an MPEG-TS container to MP4A-LATM, to an FLV file, or to MOV/MP4 files and related formats such as 3GP or M4A. Please note that it is auto-inserted for MP4A-LATM and MOV/MP4 and related formats.

av1_metadata¶

Modify metadata embedded in an AV1 stream.

td

Insert or remove temporal delimiter OBUs in all temporal units of the stream.

color_primaries

transfer_characteristics

matrix_coefficients

Set the color description fields in the stream (see AV1 section 6.4.2).

color_range

Set the color range in the stream (see AV1 section 6.4.2; note that this cannot be set for streams using BT.709 primaries, sRGB transfer characteristic and identity (RGB) matrix coefficients).

chroma_sample_position

Set the chroma sample location in the stream (see AV1 section 6.4.2). This can only be set for 4:2:0 streams.

tick_rate

Set the tick rate (time_scale / num_units_in_display_tick) in the timing info in the sequence header.

num_ticks_per_picture

Set the number of ticks in each picture, to indicate that the stream has a fixed framerate. Ignored if tick_rate is not also set.

delete_padding

Deletes Padding OBUs.

chomp¶

Remove zero padding at the end of a packet.

dca_core¶

Extract the core from a DCA/DTS stream, dropping extensions such as DTS-HD.

dump_extra¶

Add extradata to the beginning of the filtered packets except when said packets already exactly begin with the extradata that is intended to be added.

freq

The additional argument specifies which packets should be filtered. It accepts the values:

If not specified it is assumed k.

For example the following ffmpeg command forces a global header (thus disabling individual packet headers) in the H.264 packets generated by the "libx264" encoder, but corrects them by adding the header stored in extradata to the key packets:

        ffmpeg -i INPUT -map 0 -flags:v +global_header -c:v libx264 -bsf:v dump_extra out.ts

dv_error_marker¶

Blocks in DV which are marked as damaged are replaced by blocks of the specified color.

color

The color to replace damaged blocks by

sta

A 16 bit mask which specifies which of the 16 possible error status values are to be replaced by colored blocks. 0xFFFE is the default which replaces all non 0 error status values.

eac3_core¶

Extract the core from a E-AC-3 stream, dropping extra channels.

extract_extradata¶

Extract the in-band extradata.

Certain codecs allow the long-term headers (e.g. MPEG-2 sequence headers, or H.264/HEVC (VPS/)SPS/PPS) to be transmitted either "in-band" (i.e. as a part of the bitstream containing the coded frames) or "out of band" (e.g. on the container level). This latter form is called "extradata" in FFmpeg terminology.

This bitstream filter detects the in-band headers and makes them available as extradata.

remove

When this option is enabled, the long-term headers are removed from the bitstream after extraction.

filter_units¶

Remove units with types in or not in a given set from the stream.

pass_types

List of unit types or ranges of unit types to pass through while removing all others. This is specified as a '|'-separated list of unit type values or ranges of values with '-'.

remove_types

Identical to pass_types, except the units in the given set removed and all others passed through.

Extradata is unchanged by this transformation, but note that if the stream contains inline parameter sets then the output may be unusable if they are removed.

For example, to remove all non-VCL NAL units from an H.264 stream:

        ffmpeg -i INPUT -c:v copy -bsf:v 'filter_units=pass_types=1-5' OUTPUT

To remove all AUDs, SEI and filler from an H.265 stream:

        ffmpeg -i INPUT -c:v copy -bsf:v 'filter_units=remove_types=35|38-40' OUTPUT

hapqa_extract¶

Extract Rgb or Alpha part of an HAPQA file, without recompression, in order to create an HAPQ or an HAPAlphaOnly file.

texture

Specifies the texture to keep.

Convert HAPQA to HAPQ

        ffmpeg -i hapqa_inputfile.mov -c copy -bsf:v hapqa_extract=texture=color -tag:v HapY -metadata:s:v:0 encoder="HAPQ" hapq_file.mov

Convert HAPQA to HAPAlphaOnly

        ffmpeg -i hapqa_inputfile.mov -c copy -bsf:v hapqa_extract=texture=alpha -tag:v HapA -metadata:s:v:0 encoder="HAPAlpha Only" hapalphaonly_file.mov

h264_metadata¶

Modify metadata embedded in an H.264 stream.

aud

Insert or remove AUD NAL units in all access units of the stream.

sample_aspect_ratio

Set the sample aspect ratio of the stream in the VUI parameters. See H.264 table E-1.

overscan_appropriate_flag

Set whether the stream is suitable for display using overscan or not (see H.264 section E.2.1).

video_format

video_full_range_flag

Set the video format in the stream (see H.264 section E.2.1 and table E-2).

colour_primaries

transfer_characteristics

matrix_coefficients

Set the colour description in the stream (see H.264 section E.2.1 and tables E-3, E-4 and E-5).

chroma_sample_loc_type

Set the chroma sample location in the stream (see H.264 section E.2.1 and figure E-1).

tick_rate

Set the tick rate (time_scale / num_units_in_tick) in the VUI parameters. This is the smallest time unit representable in the stream, and in many cases represents the field rate of the stream (double the frame rate).

fixed_frame_rate_flag

Set whether the stream has fixed framerate - typically this indicates that the framerate is exactly half the tick rate, but the exact meaning is dependent on interlacing and the picture structure (see H.264 section E.2.1 and table E-6).

zero_new_constraint_set_flags

Zero constraint_set4_flag and constraint_set5_flag in the SPS. These bits were reserved in a previous version of the H.264 spec, and thus some hardware decoders require these to be zero. The result of zeroing this is still a valid bitstream.

crop_left

crop_right

crop_top

crop_bottom

Set the frame cropping offsets in the SPS. These values will replace the current ones if the stream is already cropped.

These fields are set in pixels. Note that some sizes may not be representable if the chroma is subsampled or the stream is interlaced (see H.264 section 7.4.2.1.1).

sei_user_data

Insert a string as SEI unregistered user data. The argument must be of the form UUID+string, where the UUID is as hex digits possibly separated by hyphens, and the string can be anything.

For example, 086f3693-b7b3-4f2c-9653-21492feee5b8+hello will insert the string ``hello'' associated with the given UUID.

delete_filler

Deletes both filler NAL units and filler SEI messages.

display_orientation

Insert, extract or remove Display orientation SEI messages. See H.264 section D.1.27 and D.2.27 for syntax and semantics.

rotate

Set rotation in display orientation SEI (anticlockwise angle in degrees). Range is -360 to +360. Default is NaN.

flip

Set flip in display orientation SEI.

level

Set the level in the SPS. Refer to H.264 section A.3 and tables A-1 to A-5.

The argument must be the name of a level (for example, 4.2), a level_idc value (for example, 42), or the special name auto indicating that the filter should attempt to guess the level from the input stream properties.

h264_mp4toannexb¶

Convert an H.264 bitstream from length prefixed mode to start code prefixed mode (as defined in the Annex B of the ITU-T H.264 specification).

This is required by some streaming formats, typically the MPEG-2 transport stream format (muxer "mpegts").

For example to remux an MP4 file containing an H.264 stream to mpegts format with ffmpeg, you can use the command:

        ffmpeg -i INPUT.mp4 -codec copy -bsf:v h264_mp4toannexb OUTPUT.ts

Please note that this filter is auto-inserted for MPEG-TS (muxer "mpegts") and raw H.264 (muxer "h264") output formats.

h264_redundant_pps¶

This applies a specific fixup to some Blu-ray streams which contain redundant PPSs modifying irrelevant parameters of the stream which confuse other transformations which require correct extradata.

A new single global PPS is created, and all of the redundant PPSs within the stream are removed.

hevc_metadata¶

Modify metadata embedded in an HEVC stream.

aud

Insert or remove AUD NAL units in all access units of the stream.

sample_aspect_ratio

Set the sample aspect ratio in the stream in the VUI parameters.

video_format

video_full_range_flag

Set the video format in the stream (see H.265 section E.3.1 and table E.2).

colour_primaries

transfer_characteristics

matrix_coefficients

Set the colour description in the stream (see H.265 section E.3.1 and tables E.3, E.4 and E.5).

chroma_sample_loc_type

Set the chroma sample location in the stream (see H.265 section E.3.1 and figure E.1).

tick_rate

Set the tick rate in the VPS and VUI parameters (time_scale / num_units_in_tick). Combined with num_ticks_poc_diff_one, this can set a constant framerate in the stream. Note that it is likely to be overridden by container parameters when the stream is in a container.

num_ticks_poc_diff_one

Set poc_proportional_to_timing_flag in VPS and VUI and use this value to set num_ticks_poc_diff_one_minus1 (see H.265 sections 7.4.3.1 and E.3.1). Ignored if tick_rate is not also set.

crop_left

crop_right

crop_top

crop_bottom

Set the conformance window cropping offsets in the SPS. These values will replace the current ones if the stream is already cropped.

These fields are set in pixels. Note that some sizes may not be representable if the chroma is subsampled (H.265 section 7.4.3.2.1).

level

Set the level in the VPS and SPS. See H.265 section A.4 and tables A.6 and A.7.

The argument must be the name of a level (for example, 5.1), a general_level_idc value (for example, 153 for level 5.1), or the special name auto indicating that the filter should attempt to guess the level from the input stream properties.

hevc_mp4toannexb¶

Convert an HEVC/H.265 bitstream from length prefixed mode to start code prefixed mode (as defined in the Annex B of the ITU-T H.265 specification).

This is required by some streaming formats, typically the MPEG-2 transport stream format (muxer "mpegts").

For example to remux an MP4 file containing an HEVC stream to mpegts format with ffmpeg, you can use the command:

        ffmpeg -i INPUT.mp4 -codec copy -bsf:v hevc_mp4toannexb OUTPUT.ts

Please note that this filter is auto-inserted for MPEG-TS (muxer "mpegts") and raw HEVC/H.265 (muxer "h265" or "hevc") output formats.

imxdump¶

Modifies the bitstream to fit in MOV and to be usable by the Final Cut Pro decoder. This filter only applies to the mpeg2video codec, and is likely not needed for Final Cut Pro 7 and newer with the appropriate -tag:v.

For example, to remux 30 MB/sec NTSC IMX to MOV:

        ffmpeg -i input.mxf -c copy -bsf:v imxdump -tag:v mx3n output.mov

mjpeg2jpeg¶

Convert MJPEG/AVI1 packets to full JPEG/JFIF packets.

MJPEG is a video codec wherein each video frame is essentially a JPEG image. The individual frames can be extracted without loss, e.g. by

        ffmpeg -i ../some_mjpeg.avi -c:v copy frames_%d.jpg

Unfortunately, these chunks are incomplete JPEG images, because they lack the DHT segment required for decoding. Quoting from <http://www.digitalpreservation.gov/formats/fdd/fdd000063.shtml>:

Avery Lee, writing in the rec.video.desktop newsgroup in 2001, commented that "MJPEG, or at least the MJPEG in AVIs having the MJPG fourcc, is restricted JPEG with a fixed -- and *omitted* -- Huffman table. The JPEG must be YCbCr colorspace, it must be 4:2:2, and it must use basic Huffman encoding, not arithmetic or progressive. . . . You can indeed extract the MJPEG frames and decode them with a regular JPEG decoder, but you have to prepend the DHT segment to them, or else the decoder won't have any idea how to decompress the data. The exact table necessary is given in the OpenDML spec."

This bitstream filter patches the header of frames extracted from an MJPEG stream (carrying the AVI1 header ID and lacking a DHT segment) to produce fully qualified JPEG images.

        ffmpeg -i mjpeg-movie.avi -c:v copy -bsf:v mjpeg2jpeg frame_%d.jpg
        exiftran -i -9 frame*.jpg
        ffmpeg -i frame_%d.jpg -c:v copy rotated.avi

mjpegadump¶

Add an MJPEG A header to the bitstream, to enable decoding by Quicktime.

mov2textsub¶

Extract a representable text file from MOV subtitles, stripping the metadata header from each subtitle packet.

See also the text2movsub filter.

mp3decomp¶

Decompress non-standard compressed MP3 audio headers.

mpeg2_metadata¶

Modify metadata embedded in an MPEG-2 stream.

display_aspect_ratio

Set the display aspect ratio in the stream.

The following fixed values are supported:

frame_rate

Set the frame rate in the stream. This is constructed from a table of known values combined with a small multiplier and divisor - if the supplied value is not exactly representable, the nearest representable value will be used instead (see H.262 section 6.3.3 and table 6-4).

video_format

Set the video format in the stream (see H.262 section 6.3.6 and table 6-6).

colour_primaries

transfer_characteristics

matrix_coefficients

Set the colour description in the stream (see H.262 section 6.3.6 and tables 6-7, 6-8 and 6-9).

mpeg4_unpack_bframes¶

Unpack DivX-style packed B-frames.

DivX-style packed B-frames are not valid MPEG-4 and were only a workaround for the broken Video for Windows subsystem. They use more space, can cause minor AV sync issues, require more CPU power to decode (unless the player has some decoded picture queue to compensate the 2,0,2,0 frame per packet style) and cause trouble if copied into a standard container like mp4 or mpeg-ps/ts, because MPEG-4 decoders may not be able to decode them, since they are not valid MPEG-4.

For example to fix an AVI file containing an MPEG-4 stream with DivX-style packed B-frames using ffmpeg, you can use the command:

        ffmpeg -i INPUT.avi -codec copy -bsf:v mpeg4_unpack_bframes OUTPUT.avi

noise¶

Damages the contents of packets or simply drops them without damaging the container. Can be used for fuzzing or testing error resilience/concealment.

Parameters:

amount

Accepts an expression whose evaluation per-packet determines how often bytes in that packet will be modified. A value below 0 will result in a variable frequency. Default is 0 which results in no modification. However, if neither amount nor drop is specified, amount will be set to -1. See below for accepted variables.

drop

Accepts an expression evaluated per-packet whose value determines whether that packet is dropped. Evaluation to a positive value results in the packet being dropped. Evaluation to a negative value results in a variable chance of it being dropped, roughly inverse in proportion to the magnitude of the value. Default is 0 which results in no drops. See below for accepted variables.

dropamount

Accepts a non-negative integer, which assigns a variable chance of it being dropped, roughly inverse in proportion to the value. Default is 0 which results in no drops. This option is kept for backwards compatibility and is equivalent to setting drop to a negative value with the same magnitude i.e. "dropamount=4" is the same as "drop=-4". Ignored if drop is also specified.

Both "amount" and "drop" accept expressions containing the following variables:

n

The index of the packet, starting from zero.

tb

The timebase for packet timestamps.

pts

Packet presentation timestamp.

dts

Packet decoding timestamp.

nopts

Constant representing AV_NOPTS_VALUE.

startpts

First non-AV_NOPTS_VALUE PTS seen in the stream.

startdts

First non-AV_NOPTS_VALUE DTS seen in the stream.

duration

d

Packet duration, in timebase units.

pos

Packet position in input; may be -1 when unknown or not set.

size

Packet size, in bytes.

key

Whether packet is marked as a keyframe.

state

A pseudo random integer, primarily derived from the content of packet payload.

Examples

Apply modification to every byte but don't drop any packets.

        ffmpeg -i INPUT -c copy -bsf noise=1 output.mkv

Drop every video packet not marked as a keyframe after timestamp 30s but do not modify any of the remaining packets.

        ffmpeg -i INPUT -c copy -bsf:v noise=drop='gt(t\,30)*not(key)' output.mkv

Drop one second of audio every 10 seconds and add some random noise to the rest.

        ffmpeg -i INPUT -c copy -bsf:a noise=amount=-1:drop='between(mod(t\,10)\,9\,10)' output.mkv

null¶

This bitstream filter passes the packets through unchanged.

pcm_rechunk¶

Repacketize PCM audio to a fixed number of samples per packet or a fixed packet rate per second. This is similar to the asetnsamples audio filter but works on audio packets instead of audio frames.

nb_out_samples, n

Set the number of samples per each output audio packet. The number is intended as the number of samples per each channel. Default value is 1024.

pad, p

If set to 1, the filter will pad the last audio packet with silence, so that it will contain the same number of samples (or roughly the same number of samples, see frame_rate) as the previous ones. Default value is 1.

frame_rate, r

This option makes the filter output a fixed number of packets per second instead of a fixed number of samples per packet. If the audio sample rate is not divisible by the frame rate then the number of samples will not be constant but will vary slightly so that each packet will start as close to the frame boundary as possible. Using this option has precedence over nb_out_samples.

You can generate the well known 1602-1601-1602-1601-1602 pattern of 48kHz audio for NTSC frame rate using the frame_rate option.

        ffmpeg -f lavfi -i sine=r=48000:d=1 -c pcm_s16le -bsf pcm_rechunk=r=30000/1001 -f framecrc -

pgs_frame_merge¶

Merge a sequence of PGS Subtitle segments ending with an "end of display set" segment into a single packet.

This is required by some containers that support PGS subtitles (muxer "matroska").

prores_metadata¶

Modify color property metadata embedded in prores stream.

color_primaries

Set the color primaries. Available values are:

transfer_characteristics

Set the color transfer. Available values are:

matrix_coefficients

Set the matrix coefficient. Available values are:

Set Rec709 colorspace for each frame of the file

        ffmpeg -i INPUT -c copy -bsf:v prores_metadata=color_primaries=bt709:color_trc=bt709:colorspace=bt709 output.mov

Set Hybrid Log-Gamma parameters for each frame of the file

        ffmpeg -i INPUT -c copy -bsf:v prores_metadata=color_primaries=bt2020:color_trc=arib-std-b67:colorspace=bt2020nc output.mov

remove_extra¶

Remove extradata from packets.

It accepts the following parameter:

freq

Set which frame types to remove extradata from.

setts¶

Set PTS and DTS in packets.

It accepts the following parameters:

ts

pts

dts

Set expressions for PTS, DTS or both.

duration

Set expression for duration.

time_base

Set output time base.

The expressions are evaluated through the eval API and can contain the following constants:

N

The count of the input packet. Starting from 0.

TS

The demux timestamp in input in case of "ts" or "dts" option or presentation timestamp in case of "pts" option.

POS

The original position in the file of the packet, or undefined if undefined for the current packet

DTS

The demux timestamp in input.

PTS

The presentation timestamp in input.

DURATION

The duration in input.

STARTDTS

The DTS of the first packet.

STARTPTS

The PTS of the first packet.

PREV_INDTS

The previous input DTS.

PREV_INPTS

The previous input PTS.

PREV_INDURATION

The previous input duration.

PREV_OUTDTS

The previous output DTS.

PREV_OUTPTS

The previous output PTS.

PREV_OUTDURATION

The previous output duration.

NEXT_DTS

The next input DTS.

NEXT_PTS

The next input PTS.

NEXT_DURATION

The next input duration.

TB

The timebase of stream packet belongs.

TB_OUT

The output timebase.

SR

The sample rate of stream packet belongs.

NOPTS

The AV_NOPTS_VALUE constant.

text2movsub¶

Convert text subtitles to MOV subtitles (as used by the "mov_text" codec) with metadata headers.

See also the mov2textsub filter.

trace_headers¶

Log trace output containing all syntax elements in the coded stream headers (everything above the level of individual coded blocks). This can be useful for debugging low-level stream issues.

Supports AV1, H.264, H.265, (M)JPEG, MPEG-2 and VP9, but depending on the build only a subset of these may be available.

truehd_core¶

Extract the core from a TrueHD stream, dropping ATMOS data.

vp9_metadata¶

Modify metadata embedded in a VP9 stream.

color_space

Set the color space value in the frame header. Note that any frame set to RGB will be implicitly set to PC range and that RGB is incompatible with profiles 0 and 2.

color_range

Set the color range value in the frame header. Note that any value imposed by the color space will take precedence over this value.

vp9_superframe¶

Merge VP9 invisible (alt-ref) frames back into VP9 superframes. This fixes merging of split/segmented VP9 streams where the alt-ref frame was split from its visible counterpart.

vp9_superframe_split¶

Split VP9 superframes into single frames.

vp9_raw_reorder¶

Given a VP9 stream with correct timestamps but possibly out of order, insert additional show-existing-frame packets to correct the ordering.

Format stream specifiers¶

Format stream specifiers allow selection of one or more streams that match specific properties.

The exact semantics of stream specifiers is defined by the "avformat_match_stream_specifier()" function declared in the libavformat/avformat.h header and documented in the Stream specifiers section in the ffmpeg(1) manual.

aa¶

Audible Format 2, 3, and 4 demuxer.

This demuxer is used to demux Audible Format 2, 3, and 4 (.aa) files.

aac¶

Raw Audio Data Transport Stream AAC demuxer.

This demuxer is used to demux an ADTS input containing a single AAC stream alongwith any ID3v1/2 or APE tags in it.

apng¶

Animated Portable Network Graphics demuxer.

This demuxer is used to demux APNG files. All headers, but the PNG signature, up to (but not including) the first fcTL chunk are transmitted as extradata. Frames are then split as being all the chunks between two fcTL ones, or between the last fcTL and IEND chunks.

-ignore_loop bool

Ignore the loop variable in the file if set. Default is enabled.

-max_fps int

Maximum framerate in frames per second. Default of 0 imposes no limit.

-default_fps int

Default framerate in frames per second when none is specified in the file (0 meaning as fast as possible). Default is 15.

asf¶

Advanced Systems Format demuxer.

This demuxer is used to demux ASF files and MMS network streams.

-no_resync_search bool

Do not try to resynchronize by looking for a certain optional start code.

concat¶

Virtual concatenation script demuxer.

This demuxer reads a list of files and other directives from a text file and demuxes them one after the other, as if all their packets had been muxed together.

The timestamps in the files are adjusted so that the first file starts at 0 and each next file starts where the previous one finishes. Note that it is done globally and may cause gaps if all streams do not have exactly the same length.

All files must have the same streams (same codecs, same time base, etc.).

The duration of each file is used to adjust the timestamps of the next file: if the duration is incorrect (because it was computed using the bit-rate or because the file is truncated, for example), it can cause artifacts. The "duration" directive can be used to override the duration stored in each file.

Syntax

The script is a text file in extended-ASCII, with one directive per line. Empty lines, leading spaces and lines starting with '#' are ignored. The following directive is recognized:

"file path"

Path to a file to read; special characters and spaces must be escaped with backslash or single quotes.

All subsequent file-related directives apply to that file.

"ffconcat version 1.0"

Identify the script type and version.

To make FFmpeg recognize the format automatically, this directive must appear exactly as is (no extra space or byte-order-mark) on the very first line of the script.

"duration dur"

Duration of the file. This information can be specified from the file; specifying it here may be more efficient or help if the information from the file is not available or accurate.

If the duration is set for all files, then it is possible to seek in the whole concatenated video.

"inpoint timestamp"

In point of the file. When the demuxer opens the file it instantly seeks to the specified timestamp. Seeking is done so that all streams can be presented successfully at In point.

This directive works best with intra frame codecs, because for non-intra frame ones you will usually get extra packets before the actual In point and the decoded content will most likely contain frames before In point too.

For each file, packets before the file In point will have timestamps less than the calculated start timestamp of the file (negative in case of the first file), and the duration of the files (if not specified by the "duration" directive) will be reduced based on their specified In point.

Because of potential packets before the specified In point, packet timestamps may overlap between two concatenated files.

"outpoint timestamp"

Out point of the file. When the demuxer reaches the specified decoding timestamp in any of the streams, it handles it as an end of file condition and skips the current and all the remaining packets from all streams.

Out point is exclusive, which means that the demuxer will not output packets with a decoding timestamp greater or equal to Out point.

This directive works best with intra frame codecs and formats where all streams are tightly interleaved. For non-intra frame codecs you will usually get additional packets with presentation timestamp after Out point therefore the decoded content will most likely contain frames after Out point too. If your streams are not tightly interleaved you may not get all the packets from all streams before Out point and you may only will be able to decode the earliest stream until Out point.

The duration of the files (if not specified by the "duration" directive) will be reduced based on their specified Out point.

"file_packet_metadata key=value"

Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries. This directive is deprecated, use "file_packet_meta" instead.

"file_packet_meta key value"

Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries.

"option key value"

Option to access, open and probe the file. Can be present multiple times.

"stream"

Introduce a stream in the virtual file. All subsequent stream-related directives apply to the last introduced stream. Some streams properties must be set in order to allow identifying the matching streams in the subfiles. If no streams are defined in the script, the streams from the first file are copied.

"exact_stream_id id"

Set the id of the stream. If this directive is given, the string with the corresponding id in the subfiles will be used. This is especially useful for MPEG-PS (VOB) files, where the order of the streams is not reliable.

"stream_meta key value"

Metadata for the stream. Can be present multiple times.

"stream_codec value"

Codec for the stream.

"stream_extradata hex_string"

Extradata for the string, encoded in hexadecimal.

"chapter id start end"

Add a chapter. id is an unique identifier, possibly small and consecutive.

Options

This demuxer accepts the following option:

safe

If set to 1, reject unsafe file paths and directives. A file path is considered safe if it does not contain a protocol specification and is relative and all components only contain characters from the portable character set (letters, digits, period, underscore and hyphen) and have no period at the beginning of a component.

If set to 0, any file name is accepted.

The default is 1.

auto_convert

If set to 1, try to perform automatic conversions on packet data to make the streams concatenable. The default is 1.

Currently, the only conversion is adding the h264_mp4toannexb bitstream filter to H.264 streams in MP4 format. This is necessary in particular if there are resolution changes.

segment_time_metadata

If set to 1, every packet will contain the lavf.concat.start_time and the lavf.concat.duration packet metadata values which are the start_time and the duration of the respective file segments in the concatenated output expressed in microseconds. The duration metadata is only set if it is known based on the concat file. The default is 0.

Examples

• Use absolute filenames and include some comments:

          # my first filename
          file /mnt/share/file-1.wav
          # my second filename including whitespace
          file '/mnt/share/file 2.wav'
          # my third filename including whitespace plus single quote
          file '/mnt/share/file 3'\''.wav'
      

• Allow for input format auto-probing, use safe filenames and set the duration of the first file:

          ffconcat version 1.0
          
          file file-1.wav
          duration 20.0
          
          file subdir/file-2.wav
      

dash¶

Dynamic Adaptive Streaming over HTTP demuxer.

This demuxer presents all AVStreams found in the manifest. By setting the discard flags on AVStreams the caller can decide which streams to actually receive. Each stream mirrors the "id" and "bandwidth" properties from the "<Representation>" as metadata keys named "id" and "variant_bitrate" respectively.

Options

This demuxer accepts the following option:

cenc_decryption_key

16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7).

imf¶

Interoperable Master Format demuxer.

This demuxer presents audio and video streams found in an IMF Composition.

flv, live_flv, kux¶

Adobe Flash Video Format demuxer.

This demuxer is used to demux FLV files and RTMP network streams. In case of live network streams, if you force format, you may use live_flv option instead of flv to survive timestamp discontinuities. KUX is a flv variant used on the Youku platform.

        ffmpeg -f flv -i myfile.flv ...
        ffmpeg -f live_flv -i rtmp://<any.server>/anything/key ....

-flv_metadata bool

Allocate the streams according to the onMetaData array content.

-flv_ignore_prevtag bool

Ignore the size of previous tag value.

-flv_full_metadata bool

Output all context of the onMetadata.

gif¶

Animated GIF demuxer.

It accepts the following options:

min_delay

Set the minimum valid delay between frames in hundredths of seconds. Range is 0 to 6000. Default value is 2.

max_gif_delay

Set the maximum valid delay between frames in hundredth of seconds. Range is 0 to 65535. Default value is 65535 (nearly eleven minutes), the maximum value allowed by the specification.

default_delay

Set the default delay between frames in hundredths of seconds. Range is 0 to 6000. Default value is 10.

ignore_loop

GIF files can contain information to loop a certain number of times (or infinitely). If ignore_loop is set to 1, then the loop setting from the input will be ignored and looping will not occur. If set to 0, then looping will occur and will cycle the number of times according to the GIF. Default value is 1.

For example, with the overlay filter, place an infinitely looping GIF over another video:

        ffmpeg -i input.mp4 -ignore_loop 0 -i input.gif -filter_complex overlay=shortest=1 out.mkv

Note that in the above example the shortest option for overlay filter is used to end the output video at the length of the shortest input file, which in this case is input.mp4 as the GIF in this example loops infinitely.

hls¶

HLS demuxer

Apple HTTP Live Streaming demuxer.

This demuxer presents all AVStreams from all variant streams. The id field is set to the bitrate variant index number. By setting the discard flags on AVStreams (by pressing 'a' or 'v' in ffplay), the caller can decide which variant streams to actually receive. The total bitrate of the variant that the stream belongs to is available in a metadata key named "variant_bitrate".

It accepts the following options:

live_start_index

segment index to start live streams at (negative values are from the end).

prefer_x_start

prefer to use #EXT-X-START if it's in playlist instead of live_start_index.

allowed_extensions

',' separated list of file extensions that hls is allowed to access.

max_reload

Maximum number of times a insufficient list is attempted to be reloaded. Default value is 1000.

m3u8_hold_counters

The maximum number of times to load m3u8 when it refreshes without new segments. Default value is 1000.

http_persistent

Use persistent HTTP connections. Applicable only for HTTP streams. Enabled by default.

http_multiple

Use multiple HTTP connections for downloading HTTP segments. Enabled by default for HTTP/1.1 servers.

http_seekable

Use HTTP partial requests for downloading HTTP segments. 0 = disable, 1 = enable, -1 = auto, Default is auto.

seg_format_options

Set options for the demuxer of media segments using a list of key=value pairs separated by ":".

image2¶

Image file demuxer.

This demuxer reads from a list of image files specified by a pattern. The syntax and meaning of the pattern is specified by the option pattern_type.

The pattern may contain a suffix which is used to automatically determine the format of the images contained in the files.

The size, the pixel format, and the format of each image must be the same for all the files in the sequence.

This demuxer accepts the following options:

framerate

Set the frame rate for the video stream. It defaults to 25.

loop

If set to 1, loop over the input. Default value is 0.

pattern_type

Select the pattern type used to interpret the provided filename.

pattern_type accepts one of the following values.

pixel_format

Set the pixel format of the images to read. If not specified the pixel format is guessed from the first image file in the sequence.

start_number

Set the index of the file matched by the image file pattern to start to read from. Default value is 0.

start_number_range

Set the index interval range to check when looking for the first image file in the sequence, starting from start_number. Default value is 5.

ts_from_file

If set to 1, will set frame timestamp to modification time of image file. Note that monotonity of timestamps is not provided: images go in the same order as without this option. Default value is 0. If set to 2, will set frame timestamp to the modification time of the image file in nanosecond precision.

video_size

Set the video size of the images to read. If not specified the video size is guessed from the first image file in the sequence.

export_path_metadata

If set to 1, will add two extra fields to the metadata found in input, making them also available for other filters (see drawtext filter for examples). Default value is 0. The extra fields are described below:

Examples

• Use ffmpeg for creating a video from the images in the file sequence img-001.jpeg, img-002.jpeg, ..., assuming an input frame rate of 10 frames per second:

          ffmpeg -framerate 10 -i 'img-%03d.jpeg' out.mkv
      

• As above, but start by reading from a file with index 100 in the sequence:

          ffmpeg -framerate 10 -start_number 100 -i 'img-%03d.jpeg' out.mkv
      

• Read images matching the "*.png" glob pattern , that is all the files terminating with the ".png" suffix:

          ffmpeg -framerate 10 -pattern_type glob -i "*.png" out.mkv
      

libgme¶

The Game Music Emu library is a collection of video game music file emulators.

See <https://bitbucket.org/mpyne/game-music-emu/overview> for more information.

It accepts the following options:

track_index

Set the index of which track to demux. The demuxer can only export one track. Track indexes start at 0. Default is to pick the first track. Number of tracks is exported as tracks metadata entry.

sample_rate

Set the sampling rate of the exported track. Range is 1000 to 999999. Default is 44100.

max_size (bytes)

The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Default is 50 MiB.

libmodplug¶

ModPlug based module demuxer

See <https://github.com/Konstanty/libmodplug>

It will export one 2-channel 16-bit 44.1 kHz audio stream. Optionally, a "pal8" 16-color video stream can be exported with or without printed metadata.

It accepts the following options:

noise_reduction

Apply a simple low-pass filter. Can be 1 (on) or 0 (off). Default is 0.

reverb_depth

Set amount of reverb. Range 0-100. Default is 0.

reverb_delay

Set delay in ms, clamped to 40-250 ms. Default is 0.

bass_amount

Apply bass expansion a.k.a. XBass or megabass. Range is 0 (quiet) to 100 (loud). Default is 0.

bass_range

Set cutoff i.e. upper-bound for bass frequencies. Range is 10-100 Hz. Default is 0.

surround_depth

Apply a Dolby Pro-Logic surround effect. Range is 0 (quiet) to 100 (heavy). Default is 0.

surround_delay

Set surround delay in ms, clamped to 5-40 ms. Default is 0.

max_size

The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Range is 0 to 100 MiB. 0 removes buffer size limit (not recommended). Default is 5 MiB.

video_stream_expr

String which is evaluated using the eval API to assign colors to the generated video stream. Variables which can be used are "x", "y", "w", "h", "t", "speed", "tempo", "order", "pattern" and "row".

video_stream

Generate video stream. Can be 1 (on) or 0 (off). Default is 0.

video_stream_w

Set video frame width in 'chars' where one char indicates 8 pixels. Range is 20-512. Default is 30.

video_stream_h

Set video frame height in 'chars' where one char indicates 8 pixels. Range is 20-512. Default is 30.

video_stream_ptxt

Print metadata on video stream. Includes "speed", "tempo", "order", "pattern", "row" and "ts" (time in ms). Can be 1 (on) or 0 (off). Default is 1.

libopenmpt¶

libopenmpt based module demuxer

See <https://lib.openmpt.org/libopenmpt/> for more information.

Some files have multiple subsongs (tracks) this can be set with the subsong option.

It accepts the following options:

subsong

Set the subsong index. This can be either 'all', 'auto', or the index of the subsong. Subsong indexes start at 0. The default is 'auto'.

The default value is to let libopenmpt choose.

layout

Set the channel layout. Valid values are 1, 2, and 4 channel layouts. The default value is STEREO.

sample_rate

Set the sample rate for libopenmpt to output. Range is from 1000 to INT_MAX. The value default is 48000.

mov/mp4/3gp¶

Demuxer for Quicktime File Format & ISO/IEC Base Media File Format (ISO/IEC 14496-12 or MPEG-4 Part 12, ISO/IEC 15444-12 or JPEG 2000 Part 12).

Registered extensions: mov, mp4, m4a, 3gp, 3g2, mj2, psp, m4b, ism, ismv, isma, f4v

Options

This demuxer accepts the following options:

enable_drefs

Enable loading of external tracks, disabled by default. Enabling this can theoretically leak information in some use cases.

use_absolute_path

Allows loading of external tracks via absolute paths, disabled by default. Enabling this poses a security risk. It should only be enabled if the source is known to be non-malicious.

seek_streams_individually

When seeking, identify the closest point in each stream individually and demux packets in that stream from identified point. This can lead to a different sequence of packets compared to demuxing linearly from the beginning. Default is true.

ignore_editlist

Ignore any edit list atoms. The demuxer, by default, modifies the stream index to reflect the timeline described by the edit list. Default is false.

advanced_editlist

Modify the stream index to reflect the timeline described by the edit list. "ignore_editlist" must be set to false for this option to be effective. If both "ignore_editlist" and this option are set to false, then only the start of the stream index is modified to reflect initial dwell time or starting timestamp described by the edit list. Default is true.

ignore_chapters

Don't parse chapters. This includes GoPro 'HiLight' tags/moments. Note that chapters are only parsed when input is seekable. Default is false.

use_mfra_for

For seekable fragmented input, set fragment's starting timestamp from media fragment random access box, if present.

Following options are available:

use_tfdt

For fragmented input, set fragment's starting timestamp to "baseMediaDecodeTime" from the "tfdt" box. Default is enabled, which will prefer to use the "tfdt" box to set DTS. Disable to use the "earliest_presentation_time" from the "sidx" box. In either case, the timestamp from the "mfra" box will be used if it's available and "use_mfra_for" is set to pts or dts.

export_all

Export unrecognized boxes within the udta box as metadata entries. The first four characters of the box type are set as the key. Default is false.

export_xmp

Export entire contents of XMP_ box and uuid box as a string with key "xmp". Note that if "export_all" is set and this option isn't, the contents of XMP_ box are still exported but with key "XMP_". Default is false.

activation_bytes

4-byte key required to decrypt Audible AAX and AAX+ files. See Audible AAX subsection below.

audible_fixed_key

Fixed key used for handling Audible AAX/AAX+ files. It has been pre-set so should not be necessary to specify.

decryption_key

16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7).

max_stts_delta

Very high sample deltas written in a trak's stts box may occasionally be intended but usually they are written in error or used to store a negative value for dts correction when treated as signed 32-bit integers. This option lets the user set an upper limit, beyond which the delta is clamped to 1. Values greater than the limit if negative when cast to int32 are used to adjust onward dts.

Unit is the track time scale. Range is 0 to UINT_MAX. Default is "UINT_MAX - 48000*10" which allows upto a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of "uint32" range.

Audible AAX

Audible AAX files are encrypted M4B files, and they can be decrypted by specifying a 4 byte activation secret.

        ffmpeg -activation_bytes 1CEB00DA -i test.aax -vn -c:a copy output.mp4

mpegts¶

MPEG-2 transport stream demuxer.

This demuxer accepts the following options:

resync_size

Set size limit for looking up a new synchronization. Default value is 65536.

skip_unknown_pmt

Skip PMTs for programs not defined in the PAT. Default value is 0.

fix_teletext_pts

Override teletext packet PTS and DTS values with the timestamps calculated from the PCR of the first program which the teletext stream is part of and is not discarded. Default value is 1, set this option to 0 if you want your teletext packet PTS and DTS values untouched.

ts_packetsize

Output option carrying the raw packet size in bytes. Show the detected raw packet size, cannot be set by the user.

scan_all_pmts

Scan and combine all PMTs. The value is an integer with value from -1 to 1 (-1 means automatic setting, 1 means enabled, 0 means disabled). Default value is -1.

merge_pmt_versions

Re-use existing streams when a PMT's version is updated and elementary streams move to different PIDs. Default value is 0.

max_packet_size

Set maximum size, in bytes, of packet emitted by the demuxer. Payloads above this size are split across multiple packets. Range is 1 to INT_MAX/2. Default is 204800 bytes.

mpjpeg¶

MJPEG encapsulated in multi-part MIME demuxer.

This demuxer allows reading of MJPEG, where each frame is represented as a part of multipart/x-mixed-replace stream.

strict_mime_boundary

Default implementation applies a relaxed standard to multi-part MIME boundary detection, to prevent regression with numerous existing endpoints not generating a proper MIME MJPEG stream. Turning this option on by setting it to 1 will result in a stricter check of the boundary value.

rawvideo¶

Raw video demuxer.

This demuxer allows one to read raw video data. Since there is no header specifying the assumed video parameters, the user must specify them in order to be able to decode the data correctly.

This demuxer accepts the following options:

framerate

Set input video frame rate. Default value is 25.

pixel_format

Set the input video pixel format. Default value is "yuv420p".

video_size

Set the input video size. This value must be specified explicitly.

For example to read a rawvideo file input.raw with ffplay, assuming a pixel format of "rgb24", a video size of "320x240", and a frame rate of 10 images per second, use the command:

        ffplay -f rawvideo -pixel_format rgb24 -video_size 320x240 -framerate 10 input.raw

sbg¶

SBaGen script demuxer.

This demuxer reads the script language used by SBaGen <http://uazu.net/sbagen/> to generate binaural beats sessions. A SBG script looks like that:

        -SE
        a: 300-2.5/3 440+4.5/0
        b: 300-2.5/0 440+4.5/3
        off: -
        NOW      == a
        +0:07:00 == b
        +0:14:00 == a
        +0:21:00 == b
        +0:30:00    off

A SBG script can mix absolute and relative timestamps. If the script uses either only absolute timestamps (including the script start time) or only relative ones, then its layout is fixed, and the conversion is straightforward. On the other hand, if the script mixes both kind of timestamps, then the NOW reference for relative timestamps will be taken from the current time of day at the time the script is read, and the script layout will be frozen according to that reference. That means that if the script is directly played, the actual times will match the absolute timestamps up to the sound controller's clock accuracy, but if the user somehow pauses the playback or seeks, all times will be shifted accordingly.

tedcaptions¶

JSON captions used for <http://www.ted.com/>.

TED does not provide links to the captions, but they can be guessed from the page. The file tools/bookmarklets.html from the FFmpeg source tree contains a bookmarklet to expose them.

This demuxer accepts the following option:

start_time

Set the start time of the TED talk, in milliseconds. The default is 15000 (15s). It is used to sync the captions with the downloadable videos, because they include a 15s intro.

Example: convert the captions to a format most players understand:

        ffmpeg -i http://www.ted.com/talks/subtitles/id/1/lang/en talk1-en.srt

vapoursynth¶

Vapoursynth wrapper.

Due to security concerns, Vapoursynth scripts will not be autodetected so the input format has to be forced. For ff* CLI tools, add "-f vapoursynth" before the input "-i yourscript.vpy".

This demuxer accepts the following option:

max_script_size

The demuxer buffers the entire script into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of scripts that can be read. Default is 1 MiB.

amqp¶

Advanced Message Queueing Protocol (AMQP) version 0-9-1 is a broker based publish-subscribe communication protocol.

FFmpeg must be compiled with --enable-librabbitmq to support AMQP. A separate AMQP broker must also be run. An example open-source AMQP broker is RabbitMQ.

After starting the broker, an FFmpeg client may stream data to the broker using the command:

        ffmpeg -re -i input -f mpegts amqp://[[user]:[password]@]hostname[:port][/vhost]

Where hostname and port (default is 5672) is the address of the broker. The client may also set a user/password for authentication. The default for both fields is "guest". Name of virtual host on broker can be set with vhost. The default value is "/".

Muliple subscribers may stream from the broker using the command:

        ffplay amqp://[[user]:[password]@]hostname[:port][/vhost]

In RabbitMQ all data published to the broker flows through a specific exchange, and each subscribing client has an assigned queue/buffer. When a packet arrives at an exchange, it may be copied to a client's queue depending on the exchange and routing_key fields.

The following options are supported:

exchange

Sets the exchange to use on the broker. RabbitMQ has several predefined exchanges: "amq.direct" is the default exchange, where the publisher and subscriber must have a matching routing_key; "amq.fanout" is the same as a broadcast operation (i.e. the data is forwarded to all queues on the fanout exchange independent of the routing_key); and "amq.topic" is similar to "amq.direct", but allows for more complex pattern matching (refer to the RabbitMQ documentation).

routing_key

Sets the routing key. The default value is "amqp". The routing key is used on the "amq.direct" and "amq.topic" exchanges to decide whether packets are written to the queue of a subscriber.

pkt_size

Maximum size of each packet sent/received to the broker. Default is 131072. Minimum is 4096 and max is any large value (representable by an int). When receiving packets, this sets an internal buffer size in FFmpeg. It should be equal to or greater than the size of the published packets to the broker. Otherwise the received message may be truncated causing decoding errors.

connection_timeout

The timeout in seconds during the initial connection to the broker. The default value is rw_timeout, or 5 seconds if rw_timeout is not set.

delivery_mode mode

Sets the delivery mode of each message sent to broker. The following values are accepted:

async¶

Asynchronous data filling wrapper for input stream.

Fill data in a background thread, to decouple I/O operation from demux thread.

        async:<URL>
        async:http://host/resource
        async:cache:http://host/resource

bluray¶

Read BluRay playlist.

The accepted options are:

angle

BluRay angle

chapter

Start chapter (1...N)

playlist

Playlist to read (BDMV/PLAYLIST/?????.mpls)

Examples:

Read longest playlist from BluRay mounted to /mnt/bluray:

        bluray:/mnt/bluray

Read angle 2 of playlist 4 from BluRay mounted to /mnt/bluray, start from chapter 2:

        -playlist 4 -angle 2 -chapter 2 bluray:/mnt/bluray

cache¶

Caching wrapper for input stream.

Cache the input stream to temporary file. It brings seeking capability to live streams.

The accepted options are:

read_ahead_limit

Amount in bytes that may be read ahead when seeking isn't supported. Range is -1 to INT_MAX. -1 for unlimited. Default is 65536.

URL Syntax is

        cache:<URL>

concat¶

Physical concatenation protocol.

Read and seek from many resources in sequence as if they were a unique resource.

A URL accepted by this protocol has the syntax:

        concat:<URL1>|<URL2>|...|<URLN>

where URL1, URL2, ..., URLN are the urls of the resource to be concatenated, each one possibly specifying a distinct protocol.

For example to read a sequence of files split1.mpeg, split2.mpeg, split3.mpeg with ffplay use the command:

        ffplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg

Note that you may need to escape the character "|" which is special for many shells.

concatf¶

Physical concatenation protocol using a line break delimited list of resources.

Read and seek from many resources in sequence as if they were a unique resource.

A URL accepted by this protocol has the syntax:

        concatf:<URL>

where URL is the url containing a line break delimited list of resources to be concatenated, each one possibly specifying a distinct protocol. Special characters must be escaped with backslash or single quotes. See the "Quoting and escaping" section in the ffmpeg-utils(1) manual.

For example to read a sequence of files split1.mpeg, split2.mpeg, split3.mpeg listed in separate lines within a file split.txt with ffplay use the command:

        ffplay concatf:split.txt

Where split.txt contains the lines:

        split1.mpeg
        split2.mpeg
        split3.mpeg

crypto¶

AES-encrypted stream reading protocol.

The accepted options are:

key

Set the AES decryption key binary block from given hexadecimal representation.

iv

Set the AES decryption initialization vector binary block from given hexadecimal representation.

Accepted URL formats:

        crypto:<URL>
        crypto+<URL>

data¶

Data in-line in the URI. See <http://en.wikipedia.org/wiki/Data_URI_scheme>.

For example, to convert a GIF file given inline with ffmpeg:

        ffmpeg -i "data:image/gif;base64,R0lGODdhCAAIAMIEAAAAAAAA//8AAP//AP///////////////ywAAAAACAAIAAADF0gEDLojDgdGiJdJqUX02iB4E8Q9jUMkADs=" smiley.png

file¶

File access protocol.

Read from or write to a file.

A file URL can have the form:

        file:<filename>

where filename is the path of the file to read.

An URL that does not have a protocol prefix will be assumed to be a file URL. Depending on the build, an URL that looks like a Windows path with the drive letter at the beginning will also be assumed to be a file URL (usually not the case in builds for unix-like systems).

For example to read from a file input.mpeg with ffmpeg use the command:

        ffmpeg -i file:input.mpeg output.mpeg

This protocol accepts the following options:

truncate

Truncate existing files on write, if set to 1. A value of 0 prevents truncating. Default value is 1.

blocksize

Set I/O operation maximum block size, in bytes. Default value is "INT_MAX", which results in not limiting the requested block size. Setting this value reasonably low improves user termination request reaction time, which is valuable for files on slow medium.

follow

If set to 1, the protocol will retry reading at the end of the file, allowing reading files that still are being written. In order for this to terminate, you either need to use the rw_timeout option, or use the interrupt callback (for API users).

seekable

Controls if seekability is advertised on the file. 0 means non-seekable, -1 means auto (seekable for normal files, non-seekable for named pipes).

Many demuxers handle seekable and non-seekable resources differently, overriding this might speed up opening certain files at the cost of losing some features (e.g. accurate seeking).

ftp¶

FTP (File Transfer Protocol).

Read from or write to remote resources using FTP protocol.

Following syntax is required.

        ftp://[user[:password]@]server[:port]/path/to/remote/resource.mpeg

This protocol accepts the following options.

timeout

Set timeout in microseconds of socket I/O operations used by the underlying low level operation. By default it is set to -1, which means that the timeout is not specified.

ftp-user

Set a user to be used for authenticating to the FTP server. This is overridden by the user in the FTP URL.

ftp-password

Set a password to be used for authenticating to the FTP server. This is overridden by the password in the FTP URL, or by ftp-anonymous-password if no user is set.

ftp-anonymous-password

Password used when login as anonymous user. Typically an e-mail address should be used.

ftp-write-seekable

Control seekability of connection during encoding. If set to 1 the resource is supposed to be seekable, if set to 0 it is assumed not to be seekable. Default value is 0.

NOTE: Protocol can be used as output, but it is recommended to not do it, unless special care is taken (tests, customized server configuration etc.). Different FTP servers behave in different way during seek operation. ff* tools may produce incomplete content due to server limitations.

gopher¶

Gopher protocol.

gophers¶

Gophers protocol.

The Gopher protocol with TLS encapsulation.

hls¶

Read Apple HTTP Live Streaming compliant segmented stream as a uniform one. The M3U8 playlists describing the segments can be remote HTTP resources or local files, accessed using the standard file protocol. The nested protocol is declared by specifying "+proto" after the hls URI scheme name, where proto is either "file" or "http".

        hls+http://host/path/to/remote/resource.m3u8
        hls+file://path/to/local/resource.m3u8

Using this protocol is discouraged - the hls demuxer should work just as well (if not, please report the issues) and is more complete. To use the hls demuxer instead, simply use the direct URLs to the m3u8 files.

http¶

HTTP (Hyper Text Transfer Protocol).

This protocol accepts the following options:

seekable

Control seekability of connection. If set to 1 the resource is supposed to be seekable, if set to 0 it is assumed not to be seekable, if set to -1 it will try to autodetect if it is seekable. Default value is -1.

chunked_post

If set to 1 use chunked Transfer-Encoding for posts, default is 1.

content_type

Set a specific content type for the POST messages or for listen mode.

http_proxy

set HTTP proxy to tunnel through e.g. http://example.com:1234

headers

Set custom HTTP headers, can override built in default headers. The value must be a string encoding the headers.

multiple_requests

Use persistent connections if set to 1, default is 0.

post_data

Set custom HTTP post data.

referer

Set the Referer header. Include 'Referer: URL' header in HTTP request.

user_agent

Override the User-Agent header. If not specified the protocol will use a string describing the libavformat build. ("Lavf/<version>")

reconnect_at_eof

If set then eof is treated like an error and causes reconnection, this is useful for live / endless streams.

reconnect_streamed

If set then even streamed/non seekable streams will be reconnected on errors.

reconnect_on_network_error

Reconnect automatically in case of TCP/TLS errors during connect.

reconnect_on_http_error

A comma separated list of HTTP status codes to reconnect on. The list can include specific status codes (e.g. '503') or the strings '4xx' / '5xx'.

reconnect_delay_max

Sets the maximum delay in seconds after which to give up reconnecting

mime_type

Export the MIME type.

http_version

Exports the HTTP response version number. Usually "1.0" or "1.1".

icy

If set to 1 request ICY (SHOUTcast) metadata from the server. If the server supports this, the metadata has to be retrieved by the application by reading the icy_metadata_headers and icy_metadata_packet options. The default is 1.

icy_metadata_headers

If the server supports ICY metadata, this contains the ICY-specific HTTP reply headers, separated by newline characters.

icy_metadata_packet

If the server supports ICY metadata, and icy was set to 1, this contains the last non-empty metadata packet sent by the server. It should be polled in regular intervals by applications interested in mid-stream metadata updates.

cookies

Set the cookies to be sent in future requests. The format of each cookie is the same as the value of a Set-Cookie HTTP response field. Multiple cookies can be delimited by a newline character.

offset

Set initial byte offset.

end_offset

Try to limit the request to bytes preceding this offset.

method

When used as a client option it sets the HTTP method for the request.

When used as a server option it sets the HTTP method that is going to be expected from the client(s). If the expected and the received HTTP method do not match the client will be given a Bad Request response. When unset the HTTP method is not checked for now. This will be replaced by autodetection in the future.

listen

If set to 1 enables experimental HTTP server. This can be used to send data when used as an output option, or read data from a client with HTTP POST when used as an input option. If set to 2 enables experimental multi-client HTTP server. This is not yet implemented in ffmpeg.c and thus must not be used as a command line option.

        # Server side (sending):
        ffmpeg -i somefile.ogg -c copy -listen 1 -f ogg http://<server>:<port>
        
        # Client side (receiving):
        ffmpeg -i http://<server>:<port> -c copy somefile.ogg
        
        # Client can also be done with wget:
        wget http://<server>:<port> -O somefile.ogg
        
        # Server side (receiving):
        ffmpeg -listen 1 -i http://<server>:<port> -c copy somefile.ogg
        
        # Client side (sending):
        ffmpeg -i somefile.ogg -chunked_post 0 -c copy -f ogg http://<server>:<port>
        
        # Client can also be done with wget:
        wget --post-file=somefile.ogg http://<server>:<port>
    

send_expect_100

Send an Expect: 100-continue header for POST. If set to 1 it will send, if set to 0 it won't, if set to -1 it will try to send if it is applicable. Default value is -1.

auth_type

Set HTTP authentication type. No option for Digest, since this method requires getting nonce parameters from the server first and can't be used straight away like Basic.

HTTP Cookies

Some HTTP requests will be denied unless cookie values are passed in with the request. The cookies option allows these cookies to be specified. At the very least, each cookie must specify a value along with a path and domain. HTTP requests that match both the domain and path will automatically include the cookie value in the HTTP Cookie header field. Multiple cookies can be delimited by a newline.

The required syntax to play a stream specifying a cookie is:

        ffplay -cookies "nlqptid=nltid=tsn; path=/; domain=somedomain.com;" http://somedomain.com/somestream.m3u8

Icecast¶

Icecast protocol (stream to Icecast servers)

This protocol accepts the following options:

ice_genre

Set the stream genre.

ice_name

Set the stream name.

ice_description

Set the stream description.

ice_url

Set the stream website URL.

ice_public

Set if the stream should be public. The default is 0 (not public).

user_agent

Override the User-Agent header. If not specified a string of the form "Lavf/<version>" will be used.

password

Set the Icecast mountpoint password.

content_type

Set the stream content type. This must be set if it is different from audio/mpeg.

legacy_icecast

This enables support for Icecast versions < 2.4.0, that do not support the HTTP PUT method but the SOURCE method.

tls

Establish a TLS (HTTPS) connection to Icecast.