NAME¶

cdceem — USB Communication Device Class Ethernet Emulation Model (CDC EEM) driver

SYNOPSIS¶

To compile this driver into the kernel, place the following lines in your kernel configuration file:

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

if_cdceem_load="YES"

DESCRIPTION¶

The cdceem driver provides support for USB devices based on the USB Communication Device Class Ethernet Emulation Model (CDC EEM) specification.

The driver works on both host, and device-side; see usb_template(4) for details.

The USB device appears as a regular network interface on both sides, transporting Ethernet frames.

For more information on configuring this device, see ifconfig(8).

The cdceem driver does not support different media types or options.

SYSCTL VARIABLES¶

The following variables are available as both sysctl(8) variables and loader(8) tunables:

hw.usb.cdceem.debug

Verbosity level for log messages from the cdceem driver. Set to 0 to disable logging or 1 to warn about potential problems. Larger values enable debugging output. Defaults to 1.

hw.usb.cdceem.send_echoes

If set to 1, the driver will send an Echo EEM packet when the interface is brought up. While responding to Echo is mandatory, some devices cannot handle it. Only use for debugging. Defaults to 0.

hw.usb.cdceem.send_fake_crc

If set to 1, the driver will use 0xdeadbeef as the CRC value for outgoing Data EEM packets. Only use for debugging. Defaults to 0.

SEE ALSO¶

arp(4), cdce(4), intro(4), ipheth(4), netintro(4), urndis(4), usb(4), usb_template(4), ifconfig(8)

Universal Serial Bus Communications Class Subclass Specification for Ethernet Emulation Model Devices, https://usb.org/sites/default/files/CDC_EEM10.pdf.

HISTORY¶

The cdceem device driver first appeared in FreeBSD 13.0.

AUTHORS¶

The cdceem driver was written by Edward Tomasz Napierala <trasz@FreeBSD.org> under sponsorship from Hewlett Packard Enterprise.