Standard¶

init= "<path to real init>"

the binary to hand over execution to on the root fs after the initramfs scripts are done.

initramfs.clear

clear screen at the beginning

initramfs.runsize

The size of the /run tmpfs mount point in bytes (suffixes are supported) or as percentage of your physical RAM. This parameter is used as the value of the size mount option to tmpfs. See https://www.kernel.org/doc/Documentation/filesystems/tmpfs.txt for details. The default is 10%.

root= "<path to blockdevice>"

the device node to mount as the root file system. The recommended usage is to specify the UUID as followed "root=UUID=xxx".

rootfstype

set the root file system type.

rootdelay

set delay in seconds. Determines how long mountroot waits for root to appear. The default is 180 seconds.

rootflags

set the file system mount option string.

nfsroot

can be either "auto" to try to get the relevant information from DHCP or a string of the form NFSSERVER:NFSPATH or NFSSERVER:NFSPATH:NFSOPTS. Use root=/dev/nfs for NFS to kick to in. NFSOPTS can be looked up in nfs(5).

ip

tells how to configure the ip address. Allows one to specify an different NFS server than the DHCP server. See Documentation/filesystems/nfsroot.txt in any recent Linux source for details. Optional parameter for NFS root.

BOOTIF

is a mac address in pxelinux format with leading "01-" and "-" as separations. pxelinux passes mac address of network card used to PXE boot on with this bootarg.

boot

either local or NFS (affects which initramfs scripts are run, see the "Subdirectories" section under boot scripts).

resume

The resume hook tries to autodetect the resume partition and uses the first swap partition as valid guess. It is possible to set the RESUME variable in /etc/initramfs-tools/conf.d/resume. The boot variable noresume overrides it.

resume_offset

Specify the offset from the partition given by "resume=" at which the swap header of the swap file is located.

quiet

reduces the amount of text output to the console during boot.

ro

mounts the rootfs read-only.

rw

mounts the rootfs read-write.

blacklist

disables load of specific modules. Use blacklist=module1,module2,module3 bootparameter.

Debug¶

panic

sets an timeout on panic. panic=<sec> is a documented security feature: it disables the debug shell.

debug

generates lots of output. It writes a log to /run/initramfs/initramfs.debug. Instead when invoked with an arbitrary argument output is written to console. Use for example "debug=vc".

break

spawns a shell in the initramfs image at the chosen phase (top, modules, premount, mount, mountroot, bottom, init) before actually executing the corresponding scripts (see the "Boot scripts" section) or action. Multiple phases may be specified, delimited by commas. The default, if no phase is specified, is "premount". Beware that if both "panic" and "break" are present, initramfs will not spawn any shells but reboot instead.

netconsole

loads netconsole linux modules with the chosen args.

all_generic_ide

loads generic IDE/ATA chipset support on boot.

Configuration hook scripts¶

These are used to override the user configuration where necessary, for example to force use of busybox instead of klibc utilities.

Hook scripts¶

These are used when an initramfs image is created and not included in the image itself. They can however cause files to be included in the image. Hook scripts are executed under errexit. Thus a hook script can abort the mkinitramfs build on possible errors (exitcode != 0).

Boot scripts¶

These are included in the initramfs image and normally executed during kernel boot in the early user-space before the root partition has been mounted.

Header¶

In order to support prereqs, each script should begin with the following lines:

#!/bin/sh
PREREQ=""
prereqs()
{
	echo "$PREREQ"
}
case $1 in
prereqs)
	prereqs
	exit 0
	;;
esac
. /usr/share/initramfs-tools/hook-functions
# Begin real processing below this line

For example, if you are writing a new hook script which relies on lvm, the line starting with PREREQ should be changed to PREREQ="lvm" which will ensure that the lvm hook script is run before your custom script.

Help functions¶

/usr/share/initramfs-tools/hook-functions contains a number of functions which deal with some common tasks in a hook script:

manual_add_modules adds a module (and any modules which it depends on) to the initramfs image.

add_modules_from_file reads a file containing a list of modules (one per line) to be added to the initramfs image. The file can contain comments (lines starting with #) and arguments to the modules by writing the arguments on the same line as the name of the module.

force_load adds a module (and its dependencies) to the initramfs image and also unconditionally loads the module during boot. Also supports passing arguments to the module by listing them after the module name.

copy_modules_dir copies an entire module directory from /lib/modules/KERNELVERSION/ into the initramfs image.

Including binaries¶

If you need to copy an executable or shared library to the initramfs module, use a command like this:

mkinitramfs will automatically detect which libraries it depends on and copy them to the initramfs. This means that most executables, unless compiled with klibc, will automatically include glibc in the image which will increase its size by several hundred kilobytes.

Including a system firmware preimage (early initramfs)¶

If you need to prepend data to the initramfs image, you need to prepare it in a file, and call the prepend_earlyinitramfs function. The file can be disposed of as soon as the function returns.

Example:

TEMP_FILE=$(mktemp ...)


  ...
prepend_earlyinitramfs ${TEMP_FILE}
rm -f ${TEMP_FILE}

Exported variables¶

mkinitramfs sets several variables for the hook scripts environment.

MODULESDIR

corresponds to the linux modules dir.

version

is the $(uname -r) linux version against mkinitramfs is run.

CONFDIR

is the path of the used initramfs-tools configurations.

DESTDIR

is the root path of the newly build initramfs.

DPKG_ARCH

allows arch specific hook additions.

verbose

corresponds to the verbosity of the update-initramfs run.

BUSYBOX, KEYMAP, MODULES

are as described in initramfs.conf(5).

BUSYBOXDIR

is the directory where busybox utilities should be installed from, or empty if busybox is not being used.

Header¶

Like for hook scripts, there are no guarantees as to the order in which the different scripts in one subdirectory (see "Subdirectories" below) are executed. In order to define a certain order, a similar header as for hook scripts should be used:

#!/bin/sh
PREREQ=""
prereqs()
{
	echo "$PREREQ"
}
case $1 in
prereqs)
	prereqs
	exit 0
	;;
esac

Where PREREQ is modified to list other scripts in the same subdirectory if necessary.

Help functions¶

A number of functions (mostly dealing with output) are provided to boot scripts in /scripts/functions :

log_success_msg Logs a success message

log_failure_msg Logs a failure message

log_warning_msg Logs a warning message

log_begin_msg Logs a message that some processing step has begun

log_end_msg Logs a message that some processing step is finished

log_begin_msg "Frobnication begun"
# Do something
log_end_msg

panic Logs an error message and executes a shell in the initramfs image to allow the user to investigate the situation.

Subdirectories¶

Both /usr/share/initramfs-tools/scripts and /etc/initramfs-tools/scripts contains the following subdirectories.

init-top the scripts in this directory are the first scripts to be executed after sysfs and procfs have been mounted. It also runs the udev hook for populating the /dev tree (udev will keep running until init-bottom).

init-premount happens after modules specified by hooks and /etc/initramfs-tools/modules have been loaded.

local-top OR nfs-top After these scripts have been executed, the root device node is expected to be present (local) or the network interface is expected to be usable (NFS).

local-block These scripts are called with the name of a local block device. After these scripts have been executed, that device node should be present. If the local-top or local-block scripts fail to create the wanted device node, the local-block scripts will be called periodically to try again.

local-premount OR nfs-premount are run after the sanity of the root device has been verified (local) or the network interface has been brought up (NFS), but before the actual root fs has been mounted.

local-bottom OR nfs-bottom are run after the rootfs has been mounted (local) or the NFS root share has been mounted.

init-bottom are the last scripts to be executed before procfs and sysfs are moved to the real rootfs and execution is turned over to the init binary which should now be found in the mounted rootfs. udev is stopped.

Boot parameters¶

/conf/param.conf allows boot scripts to change exported variables that are listed on top of init. Write the new values to it. It will be sourced after an boot script run if it exists.

Hook script¶

An example hook script would look something like this (and would usually be placed in /etc/initramfs-tools/hooks/frobnicate):

#!/bin/sh
# Example frobnication hook script
PREREQ="lvm"
prereqs()
{
	echo "$PREREQ"
}
case $1 in
prereqs)
	prereqs
	exit 0
	;;
esac
. /usr/share/initramfs-tools/hook-functions
# Begin real processing below this line
if [ ! -x "/sbin/frobnicate" ]; then
	exit 0
fi
force_load frobnicator interval=10
copy_exec /sbin/frobnicate /sbin
exit 0

Boot script¶

An example boot script would look something like this (and would usually be placed in /etc/initramfs-tools/scripts/local-top/frobnicate):

#!/bin/sh
# Example frobnication boot script
PREREQ="lvm"
prereqs()
{
	echo "$PREREQ"
}
case $1 in
prereqs)
	prereqs
	exit 0
	;;
esac
. /scripts/functions
# Begin real processing below this line
if [ ! -x "/sbin/frobnicate" ]; then
	panic "Frobnication executable not found"
fi
if [ ! -e "/dev/mapper/frobb" ]; then
	panic "Frobnication device not found"
fi
log_begin_msg "Starting frobnication"
/sbin/frobnicate "/dev/mapper/frobb" || panic "Frobnication failed"
log_end_msg
exit 0

Exported variables¶

init sets several variables for the boot scripts environment.

ROOT

corresponds to the root boot option. Advanced boot scripts like cryptsetup or live-initramfs need to play tricks. Otherwise keep it alone.

ROOTDELAY, ROOTFLAGS, ROOTFSTYPE, IP

corresponds to the rootdelay, rootflags, rootfstype or ip boot option. Use of ROOTDELAY is deprecated; you should implement a local-block boot script rather than delaying or polling.

DPKG_ARCH

allows arch specific boot actions.

blacklist, panic, quiet, resume, noresume, resume_offset

set according relevant boot option.

break

Useful for manual intervention during setup and coding an boot script.

REASON

Argument passed to the panic helper function. Use to find out why you landed in the initramfs shell.

init

passes the path to init(8) usually /sbin/init.

readonly

is the default for mounting the root corresponds to the ro bootarg. Overridden by rw bootarg.

rootmnt

is the path where root gets mounted usually /root.

debug

indicates that a debug log is captured for further investigation.