NAME¶

nbd_pwrite - write to the NBD server

SYNOPSIS¶

 #include <libnbd.h>
 int nbd_pwrite (struct nbd_handle *h, const void *buf,
                 size_t count, uint64_t offset,
                 uint32_t flags);

DESCRIPTION¶

Issue a write command to the NBD server, writing the data in "buf" to the range starting at "offset" and ending at "offset" + "count" - 1. NBD can only write all or nothing using this call. The call returns when the command has been acknowledged by the server, or there is an error. Note this will generally return an error if nbd_is_read_only(3) is true.

Note that libnbd currently enforces a maximum write buffer of 64MiB, even if the server would permit a larger buffer in a single transaction; attempts to exceed this will result in an "ERANGE" error. The server may enforce a smaller limit, which can be learned with nbd_get_block_size(3).

The "flags" parameter may be 0 for no flags, or may contain "LIBNBD_CMD_FLAG_FUA" meaning that the server should not return until the data has been committed to permanent storage (if that is supported - some servers cannot do this, see nbd_can_fua(3)).

By default, libnbd will reject attempts to use this function with parameters that are likely to result in server failure, such as requesting an unknown command flag. The nbd_set_strict_mode(3) function can be used to alter which scenarios should await a server reply rather than failing fast.

RETURN VALUE¶

If the call is successful the function returns 0.

ERRORS¶

On error "-1" is returned.

Refer to "ERROR HANDLING" in libnbd(3) for how to get further details of the error.

The following parameters must not be NULL: "h", "buf". For more information see "Non-NULL parameters" in libnbd(3).

HANDLE STATE¶

The handle must be connected with the server, otherwise this call will return an error.

VERSION¶

This function first appeared in libnbd 1.0.

If you need to test if this function is available at compile time check if the following macro is defined:

 #define LIBNBD_HAVE_NBD_PWRITE 1

EXAMPLE¶

This example is also available as examples/reads-and-writes.c in the libnbd source code.

 /* This example shows how to do synchronous reads
  * and writes randomly over the first megabyte of an
  * NBD server.  Note this will destroy any existing
  * content on the NBD server.
  *
  * To test it with nbdkit and a RAM disk:
  *
  * nbdkit -U - memory 1M \
  *     --run './simple-reads-and-writes $unixsocket'
  */
 #include <stdio.h>
 #include <stdlib.h>
 #include <inttypes.h>
 #include <assert.h>
 #include <time.h>
 #include <libnbd.h>
 int
 main (int argc, char *argv[])
 {
   struct nbd_handle *nbd;
   char buf[512];
   size_t i;
   int64_t exportsize;
   uint64_t offset;
   srand (time (NULL));
   if (argc != 2) {
     fprintf (stderr, "%s socket\n", argv[0]);
     exit (EXIT_FAILURE);
   }
   /* Create the libnbd handle. */
   nbd = nbd_create ();
   if (nbd == NULL) {
     fprintf (stderr, "%s\n", nbd_get_error ());
     exit (EXIT_FAILURE);
   }
   /* Connect to the NBD server over a
    * Unix domain socket.
    */
   if (nbd_connect_unix (nbd, argv[1]) == -1) {
     fprintf (stderr, "%s\n", nbd_get_error ());
     exit (EXIT_FAILURE);
   }
   /* Get the size of the disk and check
    * it's large enough.
    */
   exportsize = nbd_get_size (nbd);
   if (exportsize == -1) {
     fprintf (stderr, "%s\n", nbd_get_error ());
     exit (EXIT_FAILURE);
   }
   assert (exportsize >= sizeof buf);
   /* Check that the server is writable. */
   if (nbd_is_read_only (nbd) == 1) {
     fprintf (stderr, "%s: "
              "error: this NBD export is read-only\n",
              argv[0]);
     exit (EXIT_FAILURE);
   }
   for (i = 0; i < sizeof buf; ++i)
     buf[i] = rand ();
   /* 1000 writes. */
   for (i = 0; i < 1000; ++i) {
     offset = rand () % (exportsize - sizeof buf);
     if (nbd_pwrite (nbd, buf, sizeof buf,
                     offset, 0) == -1) {
       fprintf (stderr, "%s\n", nbd_get_error ());
       exit (EXIT_FAILURE);
     }
   }
   /* 1000 reads and writes. */
   for (i = 0; i < 1000; ++i) {
     offset = rand () % (exportsize - sizeof buf);
     if (nbd_pread (nbd, buf, sizeof buf,
                    offset, 0) == -1) {
       fprintf (stderr, "%s\n", nbd_get_error ());
       exit (EXIT_FAILURE);
     }
     offset = rand () % (exportsize - sizeof buf);
     if (nbd_pwrite (nbd, buf, sizeof buf,
                     offset, 0) == -1) {
       fprintf (stderr, "%s\n", nbd_get_error ());
       exit (EXIT_FAILURE);
     }
   }
   /* Sends a graceful shutdown to the server. */
   if (nbd_shutdown (nbd, 0) == -1) {
     fprintf (stderr, "%s\n", nbd_get_error ());
     exit (EXIT_FAILURE);
   }
   nbd_close (nbd);
   exit (EXIT_SUCCESS);
 }

SEE ALSO¶

nbd_aio_pwrite(3), nbd_can_fua(3), nbd_create(3), nbd_get_block_size(3), nbd_is_read_only(3), nbd_set_strict_mode(3), libnbd(3).

AUTHORS¶

Eric Blake

Richard W.M. Jones

COPYRIGHT¶

Copyright (C) 2019-2021 Red Hat Inc.

LICENSE¶

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA