EXAMPLE¶

        [publicinbox "test"]
                inboxdir = /home/user/path/to/test.git
                ; multiple addresses are supported
                address = test@example.com
                ; address = alternate@example.com
                url = http://example.com/test
                newsgroup = inbox.test
                ; backwards compatibility with public-inbox pre-1.2.0,
                ; "inboxdir" takes precedence over "mainrepo"
                mainrepo = /home/user/path/to/test.git

VARIABLES¶

publicinbox.<name>.address

The email address of the public-inbox. May be specified more than once for merging multiple mailing lists (or migrating to new addresses). This must be specified at least once, the first value will be considered the primary address for informational purposes.

Default: none, required

publicinbox.<name>.inboxdir

The absolute path to the directory which hosts the public-inbox. This must be specified once.

This was previously known as "mainrepo", which remains supported, but "inboxdir" takes precedence.

Default: none, required

publicinbox.<name>.url

The primary URL for hosting the HTTP/HTTPS archives. Additional HTTP/HTTPS URLs may be specified via "$GIT_DIR/cloneurl" as documented in gitweb(1)

Default: none, optional

publicinbox.<name>.newsgroup

The NNTP group name for use with public-inbox-nntpd(1). This may be any newsgroup name with hierarchies delimited by ".". For example, the newsgroup for <mailto:meta@public-inbox.org> is: "inbox.comp.mail.public-inbox.meta"

It also configures the folder hierarchy used by public-inbox-imapd(1) as well as public-inbox-pop3d(1)

Omitting this for a given inbox will prevent the inbox from being served by public-inbox-nntpd(1), public-inbox-imapd(1), and/or public-inbox-pop3d(1)

Default: none, optional

publicinbox.<name>.watch

See public-inbox-watch(1)

publicinbox.<name>.watchheader

See public-inbox-watch(1)

publicinbox.<name>.listid

The rfc2919 <https://tools.ietf.org/html/rfc2919> header without angle brackets for public-inbox-mda(1) deliveries and public-inbox-watch(1).

For public-inbox-watch users, this is a shortcut for specifying "publicinbox.$NAME.watchheader=List-Id:<foo.example.com>"

For public-inbox-mda users, this may be used to avoid recipient matching via "ORIGINAL_RECIPIENT" environment variable.

This may be specified multiple times for merging multiple mailing lists into a single public-inbox, only one "List-Id" header needs to match.

Default: none

publicinbox.<name>.imapmirror

This may be the full IMAP URL of an independently-run IMAP mirror.

Default: none

publicinbox.<name>.nntpmirror

This may be the full NNTP URL of an independently-run mirror. For example, the https://public-inbox.org/meta/ inbox is mirrored by Gmane at "nntp://news.gmane.io/gmane.mail.public-inbox.general"

Default: none

publicinbox.<name>.indexlevel

The indexing level for public-inbox-index(1)

"basic" only requires DBD::SQLite(3pm) and provides all NNTP functionality along with thread-awareness in the WWW interface.

"medium" requires Search::Xapian(3pm) to provide full-text term search functionality in the WWW UI.

"full" also includes positional information used by Xapian to allow for searching for phrases using quoted text. (e.g. "looking for a complete sentence")

Default: "full"

publicinbox.<name>.boost

Control indexing order for public-inbox-extindex(1), with ties broken by config file order. This only affects indexing and does not affect messages which are already indexed.

Default: 0

publicinbox.<name>.indexSequentialShard

See "publicInbox.indexSequentialShard" in public-inbox-index(1)

publicinbox.<name>.httpbackendmax

If a digit, the maximum number of parallel git-http-backend(1) processes to allow for cloning this particular inbox.

If an alphanumeric value starting with a lowercase alphabetic character is specified, the inbox will use a "NAMED LIMITER" which can be shared by multiple inboxes.

Default: 32 (using a default limiter shared by all inboxes)

publicinbox.<name>.coderepo

The nickname of a "coderepo" section associated with the inbox. May be specified more than once for M:N mapping of code repos to inboxes. If enabled, diff hunk headers in patch emails will link to the line numbers of blobs.

Default: none

publicinbox.<name>.replyto

May be used to control how reply instructions in the PSGI interface are displayed.

":none=dead inbox" may be specified to denote an inactive list ("dead inbox" may be replaced with another phrase).

A list of comma-delimited email addresses may be specified. This can be useful for dedicated inboxes for bot emails, but discussion happens on a separate mailing list/inbox.

Mirrors of existing centralized mailing lists may use ":list" here to redirect mail only to the configured inbox address. The use of ":list" is discouraged for new mailing lists, as it leads to centralization.

Default: :all

publicinbox.css

The local path name of a CSS file for the PSGI web interface. May contain the attributes "media", "title" and "href" which match the associated attributes of the HTML <style> tag. "href" may be specified to point to the URL of an remote CSS file and the path may be "/dev/null" or any empty file. Multiple files may be specified and will be included in the order specified.

publicinboxmda.spamcheck

This may be set to "none" to disable the use of SpamAssassin spamc(1) for filtering spam before it is imported into git history. Other spam filtering backends may be supported in the future.

Default: spamc

publicinboxwatch.spamcheck

See public-inbox-watch(1)

publicinboxwatch.watchspam

See public-inbox-watch(1)

publicinbox.imapserver

Set this to point to the hostname(s) of the public-inbox-imapd(1) instance. This is used to advertise the existence of the IMAP endpoint in the PublicInbox::WWW HTML interface.

Default: none

publicinbox.nntpserver

Same as "publicinbox.imapserver", but for the hostname(s) of the public-inbox-nntpd(1) instance.

Default: none

publicinbox.pop3server

Same as "publicinbox.imapserver", but for the hostname(s) of the public-inbox-pop3d(1) instance.

Default: none

publicinbox.pop3state

See "publicinbox.pop3state" in public-inbox-pop3d(1)

publicinbox.<name>.feedmax

The size of an Atom feed for the inbox. If specified more than once, only the last value is used. Invalid values (<= 0) will be treated as the default value.

Default: 25

publicinbox.<name>.hide

A comma-delimited list of listings to hide the inbox from.

Valid values are currently "www" and "manifest".

Default: none

coderepo.<nick>.dir

The path to a git repository for "publicinbox.<name>.coderepo"

coderepo.<nick>.cgitUrl

The URL of the cgit instance associated with the coderepo.

Default: none

publicinbox.cgitrc

A path to a cgitrc(5) file. "repo.url" directives in the cgitrc will be mapped to the nickname of a coderepo (without trailing slash), and "repo.path" directives map to "coderepo.<nick>.dir". Use of this directive allows admins of existing cgit installations to skip declaring coderepo sections and map inboxes directly to code repositories known to cgit.

Macro expansion (e.g. $HTTP_HOST) is not yet supported.

publicinbox.cgitbin

A path to the "cgit.cgi" executable. The PublicInbox::WWW interface can spawn cgit as a fallback if the publicinbox.cgitrc directive is configured.

Default: /var/www/htdocs/cgit/cgit.cgi or /usr/lib/cgit/cgit.cgi

publicinbox.cgitdata

A path to the data directory used by cgit for storing static files. Typically guessed based the location of "cgit.cgi" (from "publicinbox.cgitbin", but may be overridden.

Default: basename of "publicinbox.cgitbin", /var/www/htdocs/cgit/ or /usr/share/cgit/

publicinbox.mailEditor

See public-inbox-edit(1)

publicinbox.indexMaxSize =item publicinbox.indexBatchSize =item publicinbox.indexSequentialShard

See public-inbox-index(1)

publicinbox.wwwlisting

Enable a HTML listing style when the root path of the URL '/' is accessed. Valid values are:

publicinbox.grokmanifest

Controls the generation of a grokmirror-compatible gzipped JSON file at the top-level of the PSGI interface. You generally do not need to change this from the default.

Valid values are:

publicinbox.<name>.obfuscate

Whether to obfuscate email addresses in the PublicInbox::WWW HTML interface.

Default: false

publicinbox.noObfuscate

A space-delimited list of well-known addresses and domains that should not be obfuscated when "publicinbox.$NAME.obfuscate" is true (e.g., "public@example.com" and "@example.com"). This may be specified more than once, in which case the values are merged.

Default: none

extindex.<name>.topdir

The directory of an external index. See public-inbox-extindex(1) for more details.

extindex.<name>.url

Identical to "publicinbox.<name>.url", but for external indices

extindex.<name>.coderepo

Identical to "publicinbox.<name>.coderepo", but for external indices. Code repos may be freely associated with any number of public inboxes and external indices.

NAMED LIMITER (PSGI)¶

Named limiters are useful for preventing large inboxes from monopolizing (or overloading) the server. Since serving git clones (via git-http-backend(1) can be memory-intensive for large inboxes, it makes sense to put large inboxes on a named limiter with a low max value; while smaller inboxes can use the default limiter.

"RLIMIT_*" keys may be set to enforce resource limits for a particular limiter (BSD::Resource(3pm) is required).

Default named-limiters are prefixed with "-". Currently, the "-cgit" named limiter is reserved for instances spawning cgit via "publicinbox.cgitrc"

publicinboxlimiter.<name>.max

The maximum number of parallel processes for the given limiter.

publicinboxlimiter.<name>.rlimitCore

publicinboxlimiter.<name>.rlimitCPU

publicinboxlimiter.<name>.rlimitData

The maximum core size, CPU time, or data size processes run with the given limiter will use. This may be comma-separated to distinguish soft and hard limits. The word "INFINITY" is accepted as the RLIM_INFINITY constant (if supported by your OS).

See setrlimit(2) for more info on the behavior of RLIMIT_CORE, RLIMIT_CPU, and RLIMIT_DATA for you operating system.

EXAMPLE WITH NAMED LIMITERS

        ; big inboxes which require lots of memory to clone:
        [publicinbox "big1"]
                inboxdir = /path/to/big1
                address = big1@example.com
                httpbackendmax = big
        [publicinbox "big2"]
                inboxdir = /path/to/big2
                address = big2@example.com
                httpbackendmax = big
        ; tiny inboxes which are easily cloned:
        [publicinbox "tiny1"]
                inboxdir = /path/to/tiny1
                address = tiny1@example.com
        [publicinbox "tiny2"]
                inboxdir = /path/to/tiny2
                address = tiny2@example.com
        [publicinboxlimiter "big"]
                max = 4

In the above example, the "big1" and "big2" are limited to four parallel git-http-backend(1) processes between them.

However, "tiny1" and "tiny2" will share the default limiter which means there can be 32 git-http-backend(1) processes between them.