NAME¶

Eclipse - Road network importer / builder for the traffic simulation SUMO

SYNOPSIS¶

netconvert [OPTION]*

DESCRIPTION¶

Eclipse SUMO netconvert Version 1.15.0

: Copyright (C) 2001-2022 German Aerospace Center (DLR) and others; https://sumo.dlr.de

Network importer / builder for the microscopic, multi-modal traffic simulation

: SUMO.

Configuration Options:¶

-c, --configuration-file FILE: Loads the named config on startup
-C, --save-configuration FILE: Saves current configuration into FILE
--save-configuration.relative: Enforce relative paths when saving the configuration
--save-template FILE: Saves a configuration template (empty) into FILE
--save-schema FILE: Saves the configuration schema into FILE
--save-commented: Adds comments to saved template, configuration, or schema

Input Options:¶

-s, --sumo-net-file FILE: Read SUMO-net from FILE
-n, --node-files FILE: Read XML-node defs from FILE
-e, --edge-files FILE: Read XML-edge defs from FILE
-x, --connection-files FILE: Read XML-connection defs from FILE
-i, --tllogic-files FILE: Read XML-traffic light defs from FILE
-t, --type-files FILE: Read XML-type defs from FILE
--ptstop-files FILE: Reads public transport stops from FILE
--ptline-files FILE: Reads public transport lines from FILE
--polygon-files FILE: Reads polygons from FILE for embedding in network where applicable
--shapefile-prefix FILE: Read shapefiles (ArcView, Tiger, ...) from files starting with 'FILE'
--dlr-navteq-prefix FILE: Read converted Navteq GDF data (unsplitted Elmar-network) from path 'FILE'
--osm-files FILE: Read OSM-network from path 'FILE(s)'
--opendrive-files FILE: Read OpenDRIVE-network from FILE
--visum-file FILE: Read VISUM-net from FILE
--vissim-file FILE: Read VISSIM-net from FILE
--robocup-dir FILE: Read RoboCup-net from DIR
--matsim-files FILE: Read MATsim-net from FILE
--itsumo-files FILE: Read ITSUMO-net from FILE
--heightmap.shapefiles FILE: Read heightmap from ArcGIS shapefile
--heightmap.geotiff FILE: Read heightmap from GeoTIFF

Output Options:¶

--write-license: Include license info into every output file
--output-prefix STR: Prefix which is applied to all output files. The special string 'TIME' is replaced by the current time.
--precision INT: Defines the number of digits after the comma for floating point output
--precision.geo INT: Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time: Write time values as hour:minute:second or day:hour:minute:second rather than seconds
-o, --output-file FILE: The generated net will be written to FILE
-p, --plain-output-prefix FILE: Prefix of files to write plain xml nodes, edges and connections to
--junctions.join-output FILE: Writes information about joined junctions to FILE (can be loaded as additional node-file to reproduce joins
--prefix STR: Defines a prefix for edge and junction names
--amitran-output FILE: The generated net will be written to FILE using Amitran format
--matsim-output FILE: The generated net will be written to FILE using MATsim format
--opendrive-output FILE: The generated net will be written to FILE using OpenDRIVE format
--dlr-navteq-output FILE: The generated net will be written to dlr-navteq files with the given PREFIX
--dlr-navteq.precision INT: The network coordinates are written with the specified level of output precision
--output.street-names: Street names will be included in the output (if available)
--output.original-names: Writes original names, if given, as parameter
--street-sign-output FILE: Writes street signs as POIs to FILE
--ptstop-output FILE: Writes public transport stops to FILE
--ptline-output FILE: Writes public transport lines to FILE
--ptline-clean-up: Clean-up pt stops that are not served by any line
--parking-output FILE: Writes parking areas to FILE
--railway.topology.output FILE: Analyze topology of the railway network
--polygon-output FILE: Write shapes that are embedded in the network input and that are not supported by polyconvert (OpenDRIVE)
--opendrive-output.straight-threshold FLOAT: Builds parameterized curves whenever the angular change between straight segments exceeds FLOAT degrees

Projection Options:¶

--simple-projection: Uses a simple method for projection
--proj.scale FLOAT: Scaling factor for input coordinates
--proj.rotate FLOAT: Rotation (clockwise degrees) for input coordinates
--proj.utm: Determine the UTM zone (for a universal transversal mercator projection based on the WGS84 ellipsoid)
--proj.dhdn: Determine the DHDN zone (for a transversal mercator projection based on the bessel ellipsoid, "Gauss-Krueger")
--proj STR: Uses STR as proj.4 definition for projection
--proj.inverse: Inverses projection
--proj.dhdnutm: Convert from Gauss-Krueger to UTM
--proj.plain-geo: Write geo coordinates in plain-xml

Processing Options:¶

--speed-in-kmh: vmax is parsed as given in km/h
--construction-date STR: Use YYYY-MM-DD date to determine the readiness of features under construction
--flatten: Remove all z-data
--plain.extend-edge-shape: If edge shapes do not end at the node positions, extend them
--numerical-ids: Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers
--numerical-ids.node-start INT: Remaps IDs of nodes to integers starting at INT
--numerical-ids.edge-start INT: Remaps IDs of edges to integers starting at INT
--reserved-ids FILE: Ensures that generated ids do not included any of the typed IDs from FILE (sumo-gui selection file format)
--dismiss-vclasses: Removes vehicle class restrictions from imported edges
--geometry.split: Splits edges across geometry nodes
-R, --geometry.remove: Replace nodes which only define edge geometry by geometry points (joins edges)
--geometry.remove.keep-edges.explicit STR[]: Ensure that the given list of edges is not modified
--geometry.remove.keep-edges.input-file FILE: Ensure that the edges in FILE are not modified (Each id on a single line. Selection files from sumo-gui are also supported)
--geometry.remove.keep-ptstops: Ensure that edges with public transport stops are not modified
--geometry.remove.min-length FLOAT: Allow merging edges with differing attributes when their length is below min-length
--geometry.remove.width-tolerance FLOAT: Allow merging edges with differing lane widths if the difference is below FLOAT
--geometry.max-segment-length FLOAT: splits geometry to restrict segment length
--geometry.min-dist FLOAT: reduces too similar geometry points
--geometry.max-angle FLOAT: Warn about edge geometries with an angle above DEGREES in successive segments
--geometry.min-radius FLOAT: Warn about edge geometries with a turning radius less than METERS at the start or end
--geometry.min-radius.fix: Straighten edge geometries to avoid turning radii less than geometry.min-radius
--geometry.min-radius.fix.railways: Straighten edge geometries to avoid turning radii less than geometry.min-radius (only railways)
--geometry.junction-mismatch-threshold FLOAT: Warn if the junction shape is to far away from the original node position
--geometry.check-overlap FLOAT: Warn if edges overlap by more than the given threshold value
--geometry.check-overlap.vertical-threshold FLOAT: Ignore overlapping edges if they are separated vertically by the given threshold.
--geometry.avoid-overlap: Modify edge geometries to avoid overlap at junctions
--join-lanes: join adjacent lanes that have the same permissions and which do not admit lane-changing (sidewalks and disallowed lanes)
--ptline.match-dist FLOAT: Matches stops outside the road network to the referencing pt line when below the given distance
--ptstop-output.no-bidi: Skips automatic generation of stops on the bidi-edge of a loaded stop
--geometry.max-grade FLOAT: Warn about edge geometries with a grade in % above FLOAT.
--geometry.max-grade.fix: Smooth edge edge geometries with a grade in above the warning threshold.
--offset.disable-normalization: Turn off normalizing node positions
--offset.x FLOAT: Adds FLOAT to net x-positions
--offset.y FLOAT: Adds FLOAT to net y-positions
--offset.z FLOAT: Adds FLOAT to net z-positions
--flip-y-axis: Flips the y-coordinate along zero
--roundabouts.guess: Enable roundabout-guessing
--roundabouts.visibility-distance FLOAT: Default visibility when approaching a roundabout
--opposites.guess: Enable guessing of opposite direction lanes usable for overtaking
--opposites.guess.fix-lengths: Ensure that opposite edges have the same length
--fringe.guess: Enable guessing of network fringe nodes
--fringe.guess.speed-threshold FLOAT: Guess disconnected edges above the given speed as outer fringe
--lefthand: Assumes left-hand traffic on the network
--edges.join: Merges edges which connect the same nodes and are close to each other (recommended for VISSIM import)
--speed.offset FLOAT: Modifies all edge speeds by adding FLOAT
--speed.factor FLOAT: Modifies all edge speeds by multiplying by FLOAT
--speed.minimum FLOAT: Modifies all edge speeds to at least FLOAT
--edges.join-tram-dist FLOAT: Joins tram edges into road lanes with similar geometry (within FLOAT distance)

Building Defaults Options:¶

-L, --default.lanenumber INT: The default number of lanes in an edge
--default.lanewidth FLOAT: The default width of lanes
--default.spreadtype STR: The default method for computing lane shapes from edge shapes
-S, --default.speed FLOAT: The default speed on an edge (in m/s)
--default.friction FLOAT: The default friction on an edge
-P, --default.priority INT: The default priority of an edge
--default.type STR: The default edge type
--default.sidewalk-width FLOAT: The default width of added sidewalks
--default.bikelane-width FLOAT: The default width of added bike lanes
--default.crossing-width FLOAT: The default width of a pedestrian crossing
--default.allow STR: The default for allowed vehicle classes
--default.disallow STR: The default for disallowed vehicle classes
--default.junctions.keep-clear: Whether junctions should be kept clear by default
--default.junctions.radius FLOAT: The default turning radius of intersections
--default.connection-length FLOAT: The default length when overriding connection lengths
--default.right-of-way STR: The default algorithm for computing right of way rules ('default', 'edgePriority')

TLS Building Options:¶

--tls.discard-loaded: Does not instatiate traffic lights loaded from other formats than plain-XML
--tls.discard-simple: Does not instatiate traffic lights at geometry-like nodes loaded from other formats than plain-XML
--tls.set STR[]: Interprets STR[] as list of junctions to be controlled by TLS
--tls.unset STR[]: Interprets STR[] as list of junctions to be not controlled by TLS
--tls.guess: Turns on TLS guessing
--tls.guess.threshold FLOAT: Sets minimum value for the sum of all incoming lane speeds when guessing TLS
--tls.taz-nodes: Sets district nodes as tls-controlled
--tls.guess.joining: Includes node clusters into guess
--tls.join: Tries to cluster tls-controlled nodes
--tls.join-dist FLOAT: Determines the maximal distance for joining traffic lights (defaults to 20)
--tls.uncontrolled-within: Do not control edges that lie fully within a joined traffic light. This may cause collisions but allows old traffic light plans to be used
--tls.ignore-internal-junction-jam: Do not build mutually conflicting response matrix, potentially ignoring vehicles that are stuck at an internal junction when their phase has ended
--tls.guess-signals: Interprets tls nodes surrounding an intersection as signal positions for a larger TLS. This is typical pattern for OSM-derived networks
--tls.guess-signals.dist FLOAT: Distance for interpreting nodes as signal locations
--tls.cycle.time INT: Use INT as cycle duration
--tls.green.time INT: Use INT as green phase duration
-D, --tls.yellow.min-decel FLOAT: Defines smallest vehicle deceleration
--tls.yellow.patch-small: Given yellow times are patched even if being too short
--tls.yellow.time INT: Set INT as fixed time for yellow phase durations
--tls.red.time INT: Set INT as fixed time for red phase duration at traffic lights that do not have a conflicting flow
--tls.allred.time INT: Set INT as fixed time for intermediate red phase after every switch
--tls.minor-left.max-speed FLOAT: Use FLOAT as threshold for allowing left-turning vehicles to move in the same phase as oncoming straight-going vehicles
--tls.left-green.time INT: Use INT as green phase duration for left turns (s). Setting this value to 0 disables additional left-turning phases
--tls.nema.vehExt INT: Set INT as fixed time for intermediate vehext phase after every switch
--tls.nema.yellow INT: Set INT as fixed time for intermediate NEMA yelow phase after every switch
--tls.nema.red INT: Set INT as fixed time for intermediate NEMA red phase after every switch
--tls.crossing-min.time INT: Use INT as minimum green duration for pedestrian crossings (s).
--tls.crossing-clearance.time INT: Use INT as clearance time for pedestrian crossings (s).
--tls.scramble.time INT: Use INT as green phase duration for pedestrian scramble phase (s).
--tls.half-offset STR[]: TLSs in STR[] will be shifted by half-phase
--tls.quarter-offset STR[]: TLSs in STR[] will be shifted by quarter-phase
--tls.default-type STR: TLSs with unspecified type will use STR as their algorithm
--tls.layout STR: Set phase layout four grouping opposite directions or grouping all movements for one incoming edge ['opposites', 'incoming']
--tls.no-mixed: Avoid phases with green and red signals for different connections from the same lane
--tls.min-dur INT: Default minimum phase duration for traffic lights with variable phase length
--tls.max-dur INT: Default maximum phase duration for traffic lights with variable phase length
--tls.group-signals: Assign the same tls link index to connections that share the same states
--tls.ungroup-signals: Assign a distinct tls link index to every connection

Ramp Guessing Options:¶

--ramps.guess: Enable ramp-guessing
--ramps.guess-acceleration-lanes: Guess on-ramps and mark acceleration lanes if they exist but do not add new lanes
--ramps.max-ramp-speed FLOAT: Treat edges with speed > FLOAT as no ramps
--ramps.min-highway-speed FLOAT: Treat edges with speed < FLOAT as no highways
--ramps.ramp-length FLOAT: Use FLOAT as ramp-length
--ramps.min-weave-length FLOAT: Use FLOAT as minimum ramp-length
--ramps.set STR[]: Tries to handle the given edges as ramps
--ramps.unset STR[]: Do not consider the given edges as ramps
--ramps.no-split: Avoids edge splitting

Edge Removal Options:¶

--keep-edges.min-speed FLOAT: Only keep edges with speed in meters/second > FLOAT
--remove-edges.explicit STR[]: Remove edges in STR[]
--keep-edges.explicit STR[]: Only keep edges in STR[] or those which are kept due to other keep-edges or remove-edges options
--keep-edges.input-file FILE: Only keep edges in FILE (Each id on a single line. Selection files from sumo-gui are also supported) or those which are kept due to other keep-edges or remove-edges options
--remove-edges.input-file FILE: Remove edges in FILE. (Each id on a single line. Selection files from sumo-gui are also supported)
--keep-edges.postload: Remove edges after joining
--keep-edges.in-boundary STR[]: Only keep edges which are located within the given boundary (given either as CARTESIAN corner coordinates <xmin,ymin,xmax,ymax> or as polygon <x0,y0,x1,y1,...>)
--keep-edges.in-geo-boundary STR[]: Only keep edges which are located within the given boundary (given either as GEODETIC corner coordinates <lon-min,lat-min,lon-max,lat-max> or as polygon <lon0,lat0,lon1,lat1,...>)
--keep-edges.by-vclass STR[]: Only keep edges which allow one of the vclasses in STR[]
--remove-edges.by-vclass STR[]: Remove edges which allow only vclasses from STR[]
--keep-edges.by-type STR[]: Only keep edges where type is in STR[]
--keep-edges.components INT: Only keep the INT largest weakly connected components
--remove-edges.by-type STR[]: Remove edges where type is in STR[]
--remove-edges.isolated: Removes isolated edges

Unregulated Nodes Options:¶

--keep-nodes-unregulated: All nodes will be unregulated
--keep-nodes-unregulated.explicit STR[]: Do not regulate nodes in STR[]
--keep-nodes-unregulated.district-nodes: Do not regulate district nodes

Junctions Options:¶

--junctions.right-before-left.speed-threshold FLOAT: Allow building right-before-left junctions when the incoming edge speeds are below FLOAT (m/s)
--junctions.left-before-right: Build left-before-right junctions instead of right-before-left junctions
--no-internal-links: Omits internal links
--no-turnarounds: Disables building turnarounds
--no-turnarounds.tls: Disables building turnarounds at tls-controlled junctions
--no-turnarounds.geometry: Disables building turnarounds at geometry-like junctions
--no-turnarounds.except-deadend: Disables building turnarounds except at dead end junctions
--no-turnarounds.except-turnlane: Disables building turnarounds except at at junctions with a dedicated turning lane
--no-turnarounds.fringe: Disables building turnarounds at fringe junctions
--no-left-connections: Disables building connections to left
--junctions.join: Joins junctions that are close to each other (recommended for OSM import)
--junctions.join-dist FLOAT: Determines the maximal distance for joining junctions (defaults to 10)
--junctions.join-exclude STR[]: Interprets STR[] as list of junctions to exclude from joining
--junctions.join-same: Joins junctions that have the same coordinates even if not connected
--max-join-ids INT: Abbreviate junction or TLS id if it joins more than INT junctions
--junctions.corner-detail INT: Generate INT intermediate points to smooth out intersection corners
--junctions.internal-link-detail INT: Generate INT intermediate points to smooth out lanes within the intersection
--junctions.scurve-stretch FLOAT: Generate longer intersections to allow for smooth s-curves when the number of lanes changes
--junctions.join-turns: Builds common edges for turning connections with common from- and to-edge. This causes discrepancies between geometrical length and assigned length due to averaging but enables lane-changing while turning
--junctions.limit-turn-speed FLOAT: Limits speed on junctions to an average lateral acceleration of at most FLOAT m/s^2)
--junctions.limit-turn-speed.min-angle FLOAT: Do not limit turn speed for angular changes below FLOAT (degrees). The value is subtracted from the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.min-angle.railway FLOAT: Do not limit turn speed for angular changes below FLOAT (degrees) on railway edges. The value is subtracted from the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.warn.straight FLOAT: Warn about turn speed limits that reduce the speed of straight connections by more than FLOAT
--junctions.limit-turn-speed.warn.turn FLOAT: Warn about turn speed limits that reduce the speed of turning connections (no u-turns) by more than FLOAT
--junctions.small-radius FLOAT: Default radius for junctions that do not require wide vehicle turns
--junctions.higher-speed: Use maximum value of incoming and outgoing edge speed on junction instead of average
--internal-junctions.vehicle-width FLOAT: Assumed vehicle width for computing internal junction positions
--rectangular-lane-cut: Forces rectangular cuts between lanes and intersections
--check-lane-foes.roundabout: Allow driving onto a multi-lane road if there are foes on other lanes (at roundabouts)
--check-lane-foes.all: Allow driving onto a multi-lane road if there are foes on other lanes (everywhere)

Pedestrian Options:¶

--sidewalks.guess: Guess pedestrian sidewalks based on edge speed
--sidewalks.guess.max-speed FLOAT: Add sidewalks for edges with a speed equal or below the given limit
--sidewalks.guess.min-speed FLOAT: Add sidewalks for edges with a speed above the given limit
--sidewalks.guess.from-permissions: Add sidewalks for edges that allow pedestrians on any of their lanes regardless of speed
--sidewalks.guess.exclude STR[]: Do not guess sidewalks for the given list of edges
--crossings.guess: Guess pedestrian crossings based on the presence of sidewalks
--crossings.guess.speed-threshold FLOAT: At uncontrolled nodes, do not build crossings across edges with a speed above the threshold
--walkingareas: Always build walking areas even if there are no crossings
--walkingareas.join-dist FLOAT: Do not create a walkingarea between sidewalks that are connected by a pedestrian junction within FLOAT

Bicycle Options:¶

--bikelanes.guess: Guess bike lanes based on edge speed
--bikelanes.guess.max-speed FLOAT: Add bike lanes for edges with a speed equal or below the given limit
--bikelanes.guess.min-speed FLOAT: Add bike lanes for edges with a speed above the given limit
--bikelanes.guess.from-permissions: Add bike lanes for edges that allow bicycles on any of their lanes regardless of speed
--bikelanes.guess.exclude STR[]: Do not guess bikelanes for the given list of edges

Railway Options:¶

--railway.signals.discard: Discard all railway signal information loaded from other formats than plain-xml
--railway.topology.repair: Repair topology of the railway network
--railway.topology.repair.minimal: Repair topology of the railway network just enough to let loaded public transport lines to work
--railway.topology.repair.connect-straight: Allow bidirectional rail use wherever rails with opposite directions meet at a straight angle
--railway.topology.repair.stop-turn: Add turn-around connections at all loaded stops.
--railway.topology.all-bidi: Make all rails usable in both direction
--railway.topology.all-bidi.input-file FILE: Make all rails edge ids from FILE usable in both direction
--railway.topology.direction-priority: Set edge priority values based on estimated main direction
--railway.topology.extend-priority: Extend loaded edge priority values based on estimated main direction
--railway.access-distance FLOAT: The search radius for finding suitable road accesses for rail stops
--railway.max-accesses INT: The maximum road accesses registered per rail stops
--railway.access-factor FLOAT: The walking length of the access is computed as air-line distance multiplied by FLOAT

Formats Options:¶

--discard-params STR[]: Remove the list of keys from all params
--ignore-change-restrictions STR[]: List vehicle classes that may ignore lane changing restrictions ('all' discards all restrictions)
--osm.skip-duplicates-check: Skips the check for duplicate nodes and edges
--osm.elevation: Imports elevation data
--osm.layer-elevation FLOAT: Reconstruct (relative) elevation based on layer data. Each layer is raised by FLOAT m
--osm.layer-elevation.max-grade FLOAT: Maximum grade threshold in % at 50km/h when reconstrucing elevation based on layer data. The value is scaled according to road speed.
--osm.oneway-spread-right: Whether one-way roads should be spread to the side instead of centered
--osm.lane-access: Import lane-specific access restrictions
--osm.bike-access: Check additional attributes to fix directions and permissions on bike paths
--osm.sidewalks: Import sidewalks
--osm.turn-lanes: Import turning arrows from OSM to help with connection building
--osm.stop-output.length FLOAT: The default length of a public transport stop in FLOAT m
--osm.stop-output.length.bus FLOAT: The default length of a bus stop in FLOAT m
--osm.stop-output.length.tram FLOAT: The default length of a tram stop in FLOAT m
--osm.stop-output.length.train FLOAT: The default length of a train stop in FLOAT m
--osm.all-attributes: Whether additional attributes shall be imported
--osm.extra-attributes STR[]: List of additional attributes that shall be imported from OSM via osm.all-attributes (set 'all' to import all)
--osm.speedlimit-none FLOAT: The speed limit to be set when there is no actual speed limit in reality
--matsim.keep-length: The edge lengths given in the MATSIM-file will be kept
--matsim.lanes-from-capacity: The lane number will be computed from the capacity
--shapefile.street-id STR: Read edge ids from column STR
--shapefile.from-id STR: Read from-node ids from column STR
--shapefile.to-id STR: Read to-node ids from column STR
--shapefile.type-id STR: Read type ids from column STR
--shapefile.laneNumber STR: Read lane number from column STR
--shapefile.speed STR: Read speed from column STR
--shapefile.name STR: Read (non-unique) name from column STR
--shapefile.node-join-dist FLOAT: Distance threshold for determining whether distinct shapes are connected (used when from-id and to-id are not available)
--shapefile.add-params STR[]: Add the list of field names as edge params
--shapefile.use-defaults-on-failure: Uses edge type defaults on problems
--shapefile.all-bidirectional: Insert edges in both directions
--shapefile.guess-projection: Guess the proper projection
--shapefile.traditional-axis-mapping: Use traditional axis order (lon, lat)
--dlr-navteq.tolerant-permissions: Allow more vehicle classes by default
--dlr-navteq.keep-length: The edge lengths given in the DLR Navteq-file will be kept
--vissim.join-distance FLOAT: Structure join offset
--vissim.default-speed FLOAT: Use FLOAT as default speed
--vissim.speed-norm FLOAT: Factor for edge velocity
--vissim.report-unset-speeds: Writes lanes without an explicit speed set
--visum.language-file FILE: Load language mappings from FILE
--visum.use-type-priority: Uses priorities from types
--visum.use-type-laneno: Uses lane numbers from types
--visum.use-type-speed: Uses speeds from types
--visum.connector-speeds FLOAT: Sets connector speed
--visum.connectors-lane-number INT: Sets connector lane number
--visum.no-connectors: Excludes connectors
--visum.recompute-lane-number: Computes the number of lanes from the edges' capacities
--visum.verbose-warnings: Prints all warnings, some of which are due to VISUM misbehaviour
--visum.lanes-from-capacity.norm FLOAT: The factor for flow to no. lanes conversion
--opendrive.import-all-lanes: Imports all lane types
--opendrive.ignore-widths: Whether lane widths shall be ignored.
--opendrive.curve-resolution FLOAT: The geometry resolution in m when importing curved geometries as line segments.
--opendrive.advance-stopline FLOAT: Allow stop lines to be built beyond the start of the junction if the geometries allow so
--opendrive.min-width FLOAT: The minimum lane width for determining start or end of variable-width lanes
--opendrive.internal-shapes: Import internal lane shapes
--opendrive.position-ids: Sets edge-id based on road-id and offset in m (legacy)
--opendrive.lane-shapes: Use custom lane shapes to compensate discarded lane types

Report Options:¶

-v, --verbose: Switches to verbose output
--print-options: Prints option values before processing
-?, --help: Prints this screen or selected topics
-V, --version: Prints the current version
-X, --xml-validation STR: Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR: Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always")
-W, --no-warnings: Disables output of warnings
--aggregate-warnings INT: Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE: Writes all messages to FILE (implies verbose)
--message-log FILE: Writes all non-error messages to FILE (implies verbose)
--error-log FILE: Writes all warnings and errors to FILE
--ignore-errors: Continue on broken input
--ignore-errors.connections: Continue on invalid connections
--show-errors.connections-first-try: Show errors in connections at parsing
--ignore-errors.edge-type: Continue on unknown edge types

Random Number Options:¶

--random: Initialises the random number generator with the current system time
--seed INT: Initialises the random number generator with the given value

EXAMPLES¶

: netconvert -c <CONFIGURATION>
: generate net with options read from file
: netconvert -n ./nodes.xml -e ./edges.xml -v -t ./owntypes.xml
: generate net with given nodes, edges, and edge types doing verbose output

REPORTING BUGS¶

Report bugs at <https://github.com/eclipse/sumo/issues>.
Get in contact via <sumo@dlr.de>.

: Build features: Linux-5.10.0-20-amd64 x86_64 GNU 12.2.0 None FMI Proj GUI Intl SWIG GDAL FFmpeg OSG GL2PS Eigen
Copyright (C) 2001-2022 German Aerospace Center (DLR) and others; https://sumo.dlr.de

Eclipse SUMO netconvert Version 1.15.0 is part of SUMO.
This program and the accompanying materials are made available under the terms of the Eclipse Public License v2.0 which accompanies this distribution, and is available at http://www.eclipse.org/legal/epl-v20.html
This program may also be made available under the following Secondary
Licenses when the conditions for such availability set forth in the Eclipse
Public License 2.0 are satisfied: GNU General Public License, version 2 or later which is available at https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
SPDX-License-Identifier: EPL-2.0 OR GPL-2.0-or-later

January 2023

Eclipse SUMO netconvert Version 1.15.0

Source file:	netconvert.1.en.gz (from sumo 1.15.0+dfsg-1+b1)
Source last updated:	2023-01-04T15:26:27Z
Converted to HTML:	2024-10-28T22:24:22Z