Check whether a field or protocol exists¶

The simplest filter allows you to check for the existence of a protocol or field. If you want to see all packets which contain the IP protocol, the filter would be "ip" (without the quotation marks). To see all packets that contain a Token-Ring RIF field, use "tr.rif".

Whenever a protocol or field appears as the argument of a function in a filter, an exists operator for that protocol or field implicitly appears.

Values and operators¶

Each field has a value, and that value can be used in operations with comparable values (which may be literals, other fields, or function results). The value of a field is not necessarily what appears in the Wireshark display or TShark output. For example, a protocol is semantically equivalent to the sequence of bytes that it spans, not its displayed text in the protocol tree.

Comparison operators¶

The comparison operators can be expressed either through English-like abbreviations or through C-like symbols:

eq, ==    Equal
ne, !=    Not Equal
gt, >     Greater Than
lt, <     Less Than
ge, >=    Greater than or Equal to
le, <=    Less than or Equal to

The ordering depends on the value type in the usual way (e.g., lexicographic for strings and arithmetic for integers.) A field may appear more than once in a given frame. In that case equality can be strict (all fields must match the condition) or not (any field must match the condition). The inequality is the logical negation of equality. The following table contains all equality operators, their aliases and meaning:

eq, any_eq, ==    Any field must be equal
ne, all_ne, !=    All fields must be not equal


    all_eq, ===   All fields must be equal


    any_ne, !==   Any fields must be not equal

The operators "any" or "all" can be used with any comparison operator to make the test match any or all fields:

all tcp.port > 1024

any ip.addr != 1.1.1.1

The "any" and "all" modifiers take precedence over comparison operators such as "===" and "any_eq".

Search and match operators¶

Additional operators exist expressed only in English, not C-like syntax:

contains     Does the protocol, field or slice contain a value
matches, ~   Does the string match the given case-insensitive


             Perl-compatible regular expression

The "contains" operator allows a filter to search for a sequence of characters, expressed as a string, or bytes, expressed as a byte array. The type of the left hand side of the "contains" operator must be comparable to that of the right hand side after any implicit or explicit conversions.

For example, to search for a given HTTP URL in a capture, the following filter can be used:

http contains "https://www.wireshark.org"

The "contains" operator cannot be used on atomic fields, such as numbers or IP addresses.

The "matches" or "~" operator allows a filter to apply to a specified Perl-compatible regular expression (PCRE2). The regular expression must be a double quoted string. The left hand side of the "matches" operator must be a string, which can be a non-stringlike field implicitly or explicitly converted to a string. Matches are case-insensitive by default. For example, to search for a given WAP WSP User-Agent, you can write:

wsp.header.user_agent matches "cldc"

This would match "cldc", "CLDC", "cLdC" or any other combination of upper and lower case letters.

You can force case sensitivity using

wsp.header.user_agent matches "(?-i)cldc"

This is an example of PCRE2’s (?option) construct. (?-i) performs a case-sensitive pattern match but other options can be specified as well. More information can be found in the pcre2pattern(3)|https://www.pcre.org/current/doc/html/pcre2pattern.html man page.

Functions¶

The filter language has the following functions:

upper(string-field) - converts a string field to uppercase
lower(string-field) - converts a string field to lowercase
len(field)          - returns the byte length of a string or bytes field
count(field)        - returns the number of field occurrences in a frame
string(field)       - converts a non-string field to string
max(f1,...,fn)      - return the maximum value
min(f1,...,fn)      - return the minimum value
abs(field)          - return the absolute value of numeric fields

upper() and lower() are useful for performing case-insensitive string comparisons. For example:

upper(ncp.nds_stream_name) contains "MACRO"
lower(mount.dump.hostname) == "angel"

string() converts a field value to a string, suitable for use with operators like "matches" or "contains". Integer fields are converted to their decimal representation. It can be used with IP/Ethernet addresses (as well as others), but not with string or byte fields. For example:

string(frame.number) matches "[13579]$"

gives you all the odd packets.

max() and min() take any number of arguments and returns one value, respectively the largest/smallest. The arguments must all have the same type.

Protocol field types¶

Each protocol field is typed. The types are:

ASN.1 object identifier, plain or relative
AX.25 address
Boolean
Byte sequence
Character string
Character, 1 byte
Date and time
Ethernet or other MAC address
EUI64 address
Fibre Channel WWN
Floating point, single or double precision
Frame number
Globally Unique Identifier
IEEE-11073 floating point, 16 or 32 bits
IPv4 address
IPv6 address
IPX network number
Label
OSI System-ID
Protocol
Signed integer, 1, 2, 3, 4, or 8 bytes
Time offset
Unsigned integer, 1, 2, 3, 4, or 8 bytes
VINES address

An integer may be expressed in decimal, octal, hexadecimal or binary notation, or as a C-style character constant. The following seven display filters are equivalent:

frame.len > 10
frame.len > 012
frame.len > 0xa
frame.len > 0b1010
frame.len > '\n'
frame.len > '\x0a'
frame.len > '\012'

Boolean values are either true or false. In a display filter expression testing the value of a Boolean field, true is expressed as the word "True" or "TRUE" (without quotes) or any non-zero number. False is expressed as "False" or "FALSE" or the number zero. For example, a token-ring packet’s source route field is Boolean. To find any source-routed packets, a display filter would be any of the following:

tr.sr == 1
tr.sr == True
tr.sr == TRUE

Non source-routed packets can be found with:

tr.sr == 0
tr.sr == False
tr.sr == FALSE

Ethernet addresses and byte arrays are represented by hex digits. The hex digits may be separated by colons, periods, or hyphens:

eth.dst eq ff:ff:ff:ff:ff:ff
aim.data == 0.1.0.d
fddi.src == aa-aa-aa-aa-aa-aa
echo.data == 7a

IPv4 addresses can be represented in either dotted decimal notation or by using the hostname:

ip.src == 192.168.1.1
ip.dst eq www.mit.edu

IPv4 addresses can be compared with the same logical relations as numbers: eq, ne, gt, ge, lt, and le. The IPv4 address is stored in host order, so you do not have to worry about the endianness of an IPv4 address when using it in a display filter.

Classless Inter-Domain Routing (CIDR) notation can be used to test if an IPv4 address is in a certain subnet. For example, this display filter will find all packets in the 129.111 network:

ip.addr == 129.111.0.0/16

Remember, the number after the slash represents the number of bits used to represent the network. CIDR notation can also be used with hostnames, as in this example of finding IP addresses on the same network as 'sneezy' (requires that 'sneezy' resolve to an IP address for filter to be valid):

ip.addr eq sneezy/24

The CIDR notation can only be used on IP addresses or hostnames, not in variable names. So, a display filter like "ip.src/24 == ip.dst/24" is not valid (yet).

Transaction and other IDs are often represented by unsigned 16 or 32 bit integers and formatted as a hexadecimal string with "0x" prefix:

(dhcp.id == 0xfe089c15) || (ip.id == 0x0373)

Strings are enclosed in double quotes:

http.request.method == "POST"

Inside double quotes, you may use a backslash to embed a double quote or an arbitrary byte represented in either octal or hexadecimal.

browser.comment == "An embedded \" double-quote"

Use of hexadecimal to look for "HEAD":

http.request.method == "\x48EAD"

Use of octal to look for "HEAD":

http.request.method == "\110EAD"

This means that you must escape backslashes with backslashes inside double quotes.

smb.path contains "\\\\SERVER\\SHARE"

looks for \\SERVER\SHARE in "smb.path". This may be more conveniently written as

smb.path contains r"\\SERVER\SHARE"

String literals prefixed with 'r' are called "raw strings". Such strings treat backslash as a literal character. Double quotes may still be escaped with backslash but note that backslashes are always preserved in the result.

The following table lists all escape sequences supported with strings and character constants:

\'          single quote
\"          double quote
\\          backslash
\a          audible bell
\b          backspace
\f          form feed
\n          line feed
\r          carriage return
\t          horizontal tab
\v          vertical tab
\NNN        arbitrary octal value
\xNN        arbitrary hexadecimal value
\uNNNN      Unicode codepoint U+NNNN
\UNNNNNNNN  Unicode codepoint U+NNNNNNNN

Date and time values can be given in ISO 8601 format or using a legacy month-year-time format:

"2020-07-04T12:34:56"
"Sep 26, 2004 23:18:04.954975"

The 'T' separator in ISO 8601 can be omitted. ISO 8601 supports timezone designators as UTC or an offset from UTC. Legacy formats can append the value "UTC" at the end to specify time in Coordinated Universal Time. Otherwise date and time values are interpreted as local time.

The slice operator¶

You can take a slice of a field if the field is a text string or a byte array. For example, you can filter on the vendor portion of an ethernet address (the first three bytes) like this:

eth.src[0:3] == 00:00:83

Another example is:

http.content_type[0:4] == "text"

You can use the slice operator on a protocol name, too. The "frame" protocol can be useful, encompassing all the data captured by Wireshark or TShark.

token[0:5] ne 0.0.0.1.1
llc[0] eq aa
frame[100-199] contains "wireshark"

The following syntax governs slices:

[i:j]    i = start_offset, j = length
[i-j]    i = start_offset, j = end_offset, inclusive.
[i]      i = start_offset, length = 1
[:j]     start_offset = 0, length = j
[i:]     start_offset = i, end_offset = end_of_field

Offsets can be negative, in which case they indicate the offset from the end of the field. The last byte of the field is at offset -1, the last but one byte is at offset -2, and so on. Here’s how to check the last four bytes of a frame:

frame[-4:4] == 0.1.2.3

or

frame[-4:] == 0.1.2.3

A slice can always be compared against either a string or a byte sequence.

Slices can be combined. You can concatenate them using the comma operator:

ftp[1,3-5,9:] == 01:03:04:05:09:0a:0b

This concatenates offset 1, offsets 3-5, and offset 9 to the end of the ftp data.

The layer operator¶

A field can be restricted to a certain layer in the protocol stack using the layer operator (#), followed by a decimal number:

ip.addr#2 == 192.168.30.40

matches only the inner (second) layer in the packet. Layers use simple stacking semantics and protocol layers are counted sequentially starting from 1. For example, in a packet that contains two IPv4 headers, the outer (first) source address can be matched with "ip.src#1" and the inner (second) source address can be matched with "ip.src#2".

For more complicated ranges the same syntax used with slices is valid:

tcp.port#[2-4]

means layers number 2, 3 or 4 inclusive. The hash symbol is required to distinguish a layer range from a slice.

The membership operator¶

A field may be checked for matches against a set of values simply with the membership operator. For instance, you may find traffic on common HTTP/HTTPS ports with the following filter:

tcp.port in {80,443,8080}

as opposed to the more verbose:

tcp.port == 80 or tcp.port == 443 or tcp.port == 8080

To find HTTP requests using the HEAD or GET methods:

http.request.method in {"HEAD", "GET"}

The set of values can also contain ranges:

tcp.port in {443, 4430..4434}
ip.addr in {10.0.0.5 .. 10.0.0.9, 192.168.1.1..192.168.1.9}
frame.time_delta in {10 .. 10.5}

Implicit type conversions¶

Fields which are sequences of bytes, including protocols, are implicitly converted to strings for comparisons against (double quoted) literal strings and raw strings.

So, for instance, the following filters are equivalent:

tcp.payload contains "GET"
tcp.payload contains 47.45.54

As noted above, a slice can also be compared in either way:

frame[60:2] gt 50.51
frame[60:2] gt "PQ"

The inverse does not occur; stringlike fields are not implicitly converted to byte arrays. (Some operators allow stringlike fields to be compared with unquoted literals, which are then treated as strings; this is deprecated in general and specifically disallowed by the "matches" operator. Literal strings should be double quoted for clarity.)

A hex integer that is 0xff or less (which means it fits inside one byte) can be implicitly converted to a byte string. This is not allowed for hex integers greater than one byte, because then one would need to specify the endianness of the multi-byte integer. Also, this is not allowed for decimal or octal numbers, since they would be confused with the hex numbers that make up byte string literals. Nevertheless, single-byte hex integers can be convenient:

frame[4] == 0xff
frame[1:4] contains 0x02

Bitwise operators¶

It is also possible to define tests with bitwise operations. Currently the following bitwise operator is supported:

bitwise_and, &        Bitwise AND

The bitwise AND operation allows masking bits and testing to see if one or more bits are set. Bitwise AND operates on integer protocol fields and slices.

When testing for TCP SYN packets, you can write:

tcp.flags & 0x02

That expression will match all packets that contain a "tcp.flags" field with the 0x02 bit, i.e. the SYN bit, set.

To match locally administered unicast ethernet addresses you can use:

eth.addr[0] & 0x0f == 2

When using slices, the bit mask must be specified as a byte string, and it must have the same number of bytes as the slice itself, as in:

ip[42:2] & 40:ff

Arithmetic operators¶

Arithmetic expressions are supported with the usual operators:

+   Addition
-   Subtraction
*   Multiplication
/   Division
%   Modulo (integer remainder)

For example it is possible to filter for UDP destination ports greater or equal by one to the source port with the expression:

udp.dstport >= udp.srcport + 1

It is possible to group arithmetic expressions using curly brackets (parenthesis will not work for this):

tcp.dstport >= 4 * {tcp.srcport + 3}

Do not confuse this usage of curly brackets with set membership.

An unfortunate quirk in the filter syntax is that the subtraction operator must be preceded by a space character, so "A-B" must be written as "A -B" or "A - B".

Protocol field references¶

A variable using a sigil with the form ${some.proto.field} is called a field reference. A field reference is a field value read from the currently selected frame in the GUI. This is useful to build dynamic filters such as, frames since the last five minutes to the selected frame:

frame.time_relative >= ${frame.time_relative} - 300

Field references share a similar notation to macros but are distinct syntactical elements in the filter language.

Logical expressions¶

Tests can be combined using logical expressions. These too are expressible in C-like syntax or with English-like abbreviations. The following table lists the logical operators from highest to lowest precedence:

not, !    Logical NOT   (right-associative)
and, &&   Logical AND   (left-associative)
or,  ||   Logical OR    (left-associative)

The evaluation is always performed left to right. Expressions can be grouped by parentheses as well. The expression "A and B or not C or D and not E or F" is read:

(A and B) or (not C) or (D and (not E)) or F

It’s usually better to be explicit about grouping using parenthesis. The following are all valid display filter expressions:

tcp.port == 80 and ip.src == 192.168.2.1
not llc
http and frame[100-199] contains "wireshark"
(ipx.src.net == 0xbad && ipx.src.node == 0.0.0.0.0.1) || ip

Remember that whenever a protocol or field name occurs in an expression, the "exists" operator is implicitly called. The "exists" operator has the highest priority. This means that the first filter expression must be read as "show me the packets for which tcp.port exists and equals 80, and ip.src exists and equals 192.168.2.1". The second filter expression means "show me the packets where not exists llc", or in other words "where llc does not exist" and hence will match all packets that do not contain the llc protocol. The third filter expression includes the constraint that offset 199 in the frame exists, in other words the length of the frame is at least 200.

Each comparison has an implicit exists test for any field value. Care must be taken when using the display filter to remove noise from the packet trace. If, for example, you want to filter out all IP multicast packets to address 224.1.2.3, then using:

ip.dst ne 224.1.2.3

may be too restrictive. This is the same as writing:

ip.dst and ip.dst ne 224.1.2.3

The filter selects only frames that have the "ip.dst" field. Any other frames, including all non-IP packets, will not be displayed. To display the non-IP packets as well, you can use one of the following two expressions:

not ip.dst or ip.dst ne 224.1.2.3
not ip.dst eq 224.1.2.3

The first filter uses "not ip.dst" to include all non-IP packets and then lets "ip.dst ne 224.1.2.3" filter out the unwanted IP packets. The second filter also negates the implicit existance test and so is a shorter way to write the first.