NAME¶

SYNOPSIS¶

#include <libpmem.h>
cc ... -lpmem

    

DESCRIPTION¶

This library is for applications that use persistent memory directly, without the help of any library-supplied transactions or memory allocation. Higher-level libraries that build on libpmem are available and are recommended for most applications, see:

•

libpmemobj(7), a general use persistent memory API, providing memory allocation and transactional operations on variable-sized objects.

•

libpmemblk(7), providing pmem-resident arrays of fixed-sized blocks with atomic updates.

•

libpmemlog(7), providing a pmem-resident log file.

Under normal usage, libpmem will never print messages or intentionally cause the process to exit. The only exception to this is the debugging information, when enabled, as described under DEBUGGING AND ERROR HANDLING below.

CAVEATS¶

LIBRARY API VERSIONING¶

The pmem_check_version() function is used to determine whether the installed libpmem supports the version of the library API required by an application. The easiest way to do this is for the application to supply the compile-time version information, supplied by defines in <libpmem.h>, like this:

reason = pmem_check_version(PMEM_MAJOR_VERSION,
                            PMEM_MINOR_VERSION);
if (reason != NULL) {
    /* version check failed, reason string tells you why */
}

    

Any mismatch in the major version number is considered a failure, but a library with a newer minor version number will pass this check since increasing minor versions imply backwards compatibility.

An application can also check specifically for the existence of an interface by checking for the version where that interface was introduced. These versions are documented in this man page as follows: unless otherwise specified, all interfaces described here are available in version 1.0 of the library. Interfaces added after version 1.0 will contain the text introduced in version x.y in the section of this manual describing the feature.

When the version check performed by pmem_check_version() is successful, the return value is NULL. Otherwise the return value is a static string describing the reason for failing the version check. The string returned by pmem_check_version() must not be modified or freed.

ENVIRONMENT¶

•

PMEM_IS_PMEM_FORCE=val

If val is 0 (zero), then pmem_is_pmem(3) will always return false. Setting val to 1 causes pmem_is_pmem(3) to always return true. This variable is mostly used for testing but can be used to force pmem behavior on a system where a range of pmem is not detectable as pmem for some reason.

•

PMEM_NO_CLWB=1

Setting this environment variable to 1 forces libpmem to never issue the CLWB instruction on Intel hardware, falling back to other cache flush instructions instead (CLFLUSHOPT or CLFLUSH on Intel hardware). Without this environment variable, libpmem will always use the CLWB instruction for flushing processor caches on platforms that support the instruction. This variable is intended for use during library testing but may be required for some rare cases where using CLWB has a negative impact on performance.

•

PMEM_NO_CLFLUSHOPT=1

Setting this environment variable to 1 forces libpmem to never issue the CLFLUSHOPT instruction on Intel hardware, falling back to the CLFLUSH instructions instead. Without this environment variable, libpmem will always use the CLFLUSHOPT instruction for flushing processor caches on platforms that support the instruction, but where CLWB is not available. This variable is intended for use during library testing.

•

PMEM_NO_FLUSH=1

Setting this environment variable to 1 forces most libpmem functions to never issue any of CLFLUSH, CLFLUSHOPT or CLWB instructions on Intel hardware. The only exceptions are pmem_deep_flush(3) and pmem_deep_persist(3) functions.

•

PMEM_NO_FLUSH=0

Setting this environment variable to 0 forces to always flush CPU caches using one of CLFLUSH, CLFLUSHOPT or CLWB instructions even if pmem_has_auto_flush(3) function returns true and the platform supports flushing the processor caches on power loss or system crash.

•

PMEM_NO_MOVNT=1

Setting this environment variable to 1 forces libpmem to never use the non-temporal move instructions on Intel hardware. Without this environment variable, libpmem will use the non-temporal instructions for copying larger ranges to persistent memory on platforms that support the instructions. This variable is intended for use during library testing.

•

PMEM_MOVNT_THRESHOLD=val

This environment variable allows overriding the minimum length of the pmem_memmove_persist(3) operations, for which libpmem uses non-temporal move instructions. Setting this environment variable to 0 forces libpmem to always use the non-temporal move instructions if available. It has no effect if PMEM_NO_MOVNT is set to 1. This variable is intended for use during library testing.

•

PMEM_MMAP_HINT=val

This environment variable allows overriding the hint address used by pmem_map_file(). If set, it also disables mapping address randomization. This variable is intended for use during library testing and debugging. Setting it to some fairly large value (i.e. 0x10000000000) will very likely result in mapping the file at the specified address (if not used) or at the first unused region above given address, without adding any random offset. When debugging, this makes it easier to calculate the actual address of the persistent memory block, based on its offset in the file. In case of libpmemobj it simplifies conversion of a persistent object identifier (OID) into a direct pointer to the object.

DEBUGGING AND ERROR HANDLING¶

Two versions of libpmem are typically available on a development system. The normal version, accessed when a program is linked using the -lpmem option, is optimized for performance. That version skips checks that impact performance and never logs any trace information or performs any run-time assertions.

A second version of libpmem, accessed when a program uses the libraries under /usr/lib/pmdk_debug, contains run-time assertions and trace points. The typical way to access the debug version is to set the environment variable LD_LIBRARY_PATH to /usr/lib/pmdk_debug or /usr/lib64/pmdk_debug, as appropriate. Debugging output is controlled using the following environment variables. These variables have no effect on the non-debug version of the library.

•

PMEM_LOG_LEVEL

The value of PMEM_LOG_LEVEL enables trace points in the debug version of the library, as follows:

•

0 - This is the default level when PMEM_LOG_LEVEL is not set. No log messages are emitted at this level.

•

1 - Additional details on any errors detected are logged, in addition to returning the errno-based errors as usual. The same information may be retrieved using pmem_errormsg().

•

2 - A trace of basic operations is logged.

•

3 - Enables a very verbose amount of function call tracing in the library.

•

4 - Enables voluminous and fairly obscure tracing information that is likely only useful to the libpmem developers.

Unless PMEM_LOG_FILE is set, debugging output is written to stderr.

•

PMEM_LOG_FILE

Specifies the name of a file where all logging information should be written. If the last character in the name is “-”, the PID of the current process will be appended to the file name when the log file is created. If PMEM_LOG_FILE is not set, output is written to stderr.

EXAMPLE¶

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <libpmem.h>
/* using 4k of pmem for this example */
#define PMEM_LEN 4096
#define PATH "/pmem-fs/myfile"
int
main(int argc, char *argv[])
{
    char *pmemaddr;
    size_t mapped_len;
    int is_pmem;
    /* create a pmem file and memory map it */
    if ((pmemaddr = pmem_map_file(PATH, PMEM_LEN, PMEM_FILE_CREATE,
            0666, &mapped_len, &is_pmem)) == NULL) {
        perror("pmem_map_file");
        exit(1);
    }
    /* store a string to the persistent memory */
    strcpy(pmemaddr, "hello, persistent memory");
    /* flush above strcpy to persistence */
    if (is_pmem)
        pmem_persist(pmemaddr, mapped_len);
    else
        pmem_msync(pmemaddr, mapped_len);
    /*
     * Delete the mappings. The region is also
     * automatically unmapped when the process is
     * terminated.
     */
    pmem_unmap(pmemaddr, mapped_len);
}

    

See <https://pmem.io/pmdk/libpmem> for more examples using the libpmem API.

ACKNOWLEDGEMENTS¶

SEE ALSO¶