NAME¶

SYNOPSIS¶

/usr/sbin/uesensor -l |  -a
/usr/sbin/uesensor -t token -i index [-v]

DESCRIPTION¶

There are 4 types of system sensors that can be retrieved with uesensor; each sensor has an identifying token:

3

Thermal sensor

9001

Fan speed sensor

9002

Voltage sensor

9004

Power supply sensor

Each sensor is uniquely identified by a combination of token and index number; index numbers start at 0 and are contiguous. For example, the second fan on the system would be identified by token number 9001 and index 1.

The state of each sensor consists of a status and a measured value. The status value is one of the following:

9

Critical low

10

Warning low

11

Normal

12

Warning high

13

Critical high

The measured value depends on the type of sensor. Thermal sensors are measured in degrees Celcius; fan speed is measured in revolutions per minute; voltage is measured in millivolts; power supply measurements are defined as follows:

0

Not present

1

Present and not operational

2

Status unknown

3

Present and operational

Each sensor is also associated with a location code; this location code may not be unique (for example, there may be multiple voltage sensors on a planar).

OPTIONS¶

-l

List all the sensors in human-readable format.

-a

List all the sensors in a tabular, numerical format. One line will be printed for each sensor in the following format:

<token> <index> <status> <measured_value> <location_code>
    

-t token

Specify the token of a specific sensor to query. Also requires the -i option to be specified.

-i index

Specify the index of a specific sensor to query. Also requires the -t option to be specified.

-v

Print the measured value rather than the sensor status, which is the default value printed. Requires both the -t and -i options to be specified.

SEE ALSO¶