table of contents
other versions
- buster 1.1-2
- buster-backports 1.3.1-2~bpo10+1
- testing 1.3.1-2
- unstable 1.3.1-2
tlp(8) | Power Management | tlp(8) |
NAME¶
tlp - apply laptop power saving settingsSYNOPSIS¶
tlp command [parameters] [-- <config> ... ]DESCRIPTION¶
Apply power saving settings manually and control ThinkPad battery features.COMMANDS¶
- start
- Initialize tlp and apply power saving settings according to the actual power source. Also use to apply a changed configuration.
- bat
- Apply power saving settings for battery power source.
- true
- Same as bat.
- ac
- Apply power saving settings for AC power source.
- false
- Same as ac.
- usb
- Enable autosuspend for all USB devices, except blacklisted ones.
- bayoff
- Turn off optical drive in UltraBay/MediaBay. The drive may be re-enabled by pulling the eject lever or pushing the media eject button on newer models.
- setcharge [START_CHARGE STOP_CHARGE] [BAT0|BAT1] (ThinkPads only)
- Set charge thresholds of main (BAT0) or auxiliary (BAT1) battery temporarily. Values must be between 1 and 100, START_CHARGE must not exceed STOP_CHARGE - 4. Configured thresholds are restored upon next system boot-up. When called without arguments, configured thresholds are set.
- fullcharge [BAT0|BAT1] (ThinkPads only)
- Set charge thresholds of main (BAT0) or auxiliary (BAT1) battery to factory presets (96/100) temporarily (causing a full charge). Configured thresholds are restored upon next system boot-up.
- chargeonce [BAT0|BAT1] (ThinkPads only)
- Charge main (BAT0) or auxiliary (BAT1) battery to the stop charge threshold once (bypassing start threshold). Configured thresholds are restored upon next system boot-up.
- discharge [BAT0|BAT1] (ThinkPads only)
- Force complete discharge of main (BAT0) or auxiliary (BAT1) battery.
- recalibrate [BAT0|BAT1] (ThinkPads only)
- Battery recalibration: completely discharge main (BAT0) or auxiliary (BAT1) battery and recharge to 100%.
- diskid
- Show disk ids for configuration.
- -- PARAM=value ...
- Add parameters to temporarily overwrite the system configuration (for this program invocation only).
NOTES¶
For ThinkPads with more than one battery the selection works as follows:- BAT0 - Main or internal battery
- BAT1 - Ultrabay, Slice or replaceable battery
EXAMPLES¶
Apply thresholds of 70 / 90% to the main battery:- tlp setcharge 70 90 BAT0
Charge the auxiliary battery to full capacity:
- tlp fullcharge BAT1
Recalibrate the main battery:
- tlp recalibrate BAT0
FILES¶
/etc/tlp.confSystem-wide user configuration file, uncomment parameters
here to override default settings and customization files below.
/etc/tlp.d/*.conf
System-wide drop-in customization files, overriding
defaults below.
/usr/share/tlp/defaults.conf
Intrinsic default settings. DO NOT EDIT this file,
instead use one of the above alternatives.
/run/tlp/run.conf
Effective settings consolidated from all above files. DO
NOT CHANGE this file, it is for reference only and regenerated on every
invocation of TLP.
/etc/default/tlp
Obsolete system-wide configuration file. DO NOT USE this
file, it is evaluated only when /etc/tlp.conf is non-existent.
EXIT STATUS¶
On success, 0 is returned, a non-zero failure code otherwise.SEE ALSO¶
tlp-stat(8), bluetooth(1), wifi(1), wwan(1).AUTHOR¶
(c) 2020 Thomas Koch <linrunner at gmx.net>2020-01-31 | TLP 1.3.0 |