Scroll to navigation
| AO-RAWLOAD(1) |
General Commands Manual |
AO-RAWLOAD(1) |
NAME¶
ao-rawload - flash a program to a AltOS device
SYNOPSIS¶
ao-rawload [-T tty-device] [--tty tty-device] [-D
altos-device] [--device altos-device] file.ihx
DESCRIPTION¶
ao-rawload loads the specified .ihx file, without modification, into the
target device flash or ram (depending on the base address of the .ihx file).
OPTIONS¶
- -T tty-device | --tty tty-device
- This selects which tty device the debugger uses to communicate with the
target device. The special name 'BITBANG' directs ao-dbg to use the cp2103
connection, otherwise this should be a usb serial port connected to a
suitable cc1111 debug node.
- -D AltOS-device | --device AltOS-device
- Search for a connected device. This requires an argument of one of the
following forms:
- TeleMetrum:2
TeleMetrum
2
- Leaving out the product name will cause the tool to select a suitable
product, leaving out the serial number will cause the tool to match one of
the available devices.
- -r | --run
- After the file has been loaded, set the PC to the base address of the
image and resume execution there. the .ihx file.
USAGE¶
ao-rawload reads the specified .ihx file into memory. It then connects to
the specified target device and writes the program to the target device memory
and, optionally, starts the program executing.
