|avrp(1)||General Commands Manual||avrp(1)|
NAME¶avrp - Atmel AVR programming software to use with Atmel's serial-port programmers
SYNOPSIS¶avrp [-s <serial port>] [-a <chip type>] [-prv] [-f <filename>] [-e <filename>] [-d <deffile>] [-l <lockmode>] [--enable <fuse>] [--disable <fuse>] [--version] [--help] [-qIh]
DESCRIPTION¶avrp works on serial-port programmers which use Atmel's communication protocol for serial-port programmers. These programmers can program AVR (and other) chips both in serial and parallel mode.
These programmers are known: AVR ICP - Atmel In-circuit programmer AVR PPR - Atmel parallel programmer AVR DEV - Atmel development board AVR A.G - Parallel mode programmer by Adrian Godwin
Adrian Godwin's programmer can be found on http://www.fangorn.demon.co.uk
Instruction on how to build Atmel's in-circuit programmer can be found on Atmel's homepage (http://www.atmel.com). Look for application note avr910
avrp is currently supporting these systems: Linux FreeBSD AmigaOS win32 (windows 95++ and NT)
The source-code part of Atmel's application note AVR910 was used to determine how to communicate with these programmers.
OPTIONS¶Several option can be given after one '-', but if an option requires an argument; the argument must be given after that option.
- -s <serial port>
- Specifies which serial port to talk through. This option can be avoided if you set the environment variable AVRP_SERIALPORT
- -a <chip type>
- Specifies what kind of chip to talk to. Use '-a list' for chip type to get a list of supported devices. You can use the shortest possible abbreviation to identify a chip. This option can be avoided if you set the environment variable AVRP_AVRTYPE
- Program a chip -f <filename> and/or -e <filename> must be specified to determine which files to read from. (-f specifes flash, and -e eeprom)
- Read a chip -f <filename> and/or -e <filename> must be specified to determine which files to write to. (-f specifes flash, and -e eeprom)
- Verify. Performs a standalone verify. (The program function will always do a inline verify) -f <filename> and/or -e <filename> must be specified to determine which files to read from. (-f specifes flash, and -e eeprom)
- -f <filename>
- Specifies which flash-file to read/write. Supportet formats are Intel HEX and Atmel's generic fileformat.
- -e <filename>
- Specifies which eeprom-file to read/write. Supportet formats are Intel HEX and Atmel's generic fileformat.
- -l <lockmode>
- Specifies lockmode to progam into the chip. Use '-l list' to get a list of possible lockmodes.
- Quiet. Don't write any progress information. Will speed up programming.
- -d <deffile>
- Specifies the path and filename of avrp.def if default location is not possible. Can also be set with the environment variable AVRP_DEFFILE
- Ignores the signature in the chip. This is very useful if the signature in the chip have been destroyed in some way.
- --enable <fuses>
- Enables specified fuses.
- --disable <fuses>
- Disables specified fuses.
- You can use this to speed up programming on newer programmer firmware.
- Print out version information.
- --help -h
- Print out a short help text.
- Specifies which serial port to use.
- Specifies chip to talk to.
- Specifies the location of avrp.def
EXAMPLES¶Print out information on the programmer: avrp -s /dev/ttyS1
Same as above, but also give information on the inserted chip: avrp -s /dev/ttyS1 -a AT90S1200-D/E/F
Program a chip (flash only, and using a short chip-descriptor): avrp -s /dev/ttyS1 -a 1200-d -p -f avr910.rom
Read a chip (flash and eeprom, AVRP_SERIALPORT is set): avrp -a 8515 -rf test.hex -e test.eep.hex
COPYRIGHT¶Copyright (C) 1997-1998 Jon Anders Haugum
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
AUTHOR¶Jon Anders Haugum <email@example.com>
|28 September 1998||Version 1.0 beta 3|