| CANSNIFFER(1) | User Commands | CANSNIFFER(1) |
NAME¶
cansniffer - manual page for cansniffer 2018.02.0-1SYNOPSIS¶
cansniffer [can-interface]OPTIONS¶
- -m <mask>
- (initial FILTER default 0x00000000)
- -v <value>
- (initial FILTER default 0x00000000)
- -q
- (quiet - all IDs deactivated)
- -r <name>
- (read sniffset.name from file)
- -b
- (start with binary mode)
- -B
- (start with binary mode with gap - exceeds 80 chars!)
- -c
- (color changes)
- -f
- (filter on CAN-ID only)
- -t <time>
- (timeout for ID display [x10ms] default: 500, 0 = OFF)
- -h <time>
- (hold marker on changes [x10ms] default: 100)
- -l <time>
- (loop time (display) [x10ms] default: 20)
Use interface name 'any' to receive from all can-interfaces.
commands that can be entered at runtime:¶
- q<ENTER>
- - quit
- b<ENTER>
- - toggle binary / HEX-ASCII output
- B<ENTER>
- - toggle binary with gap / HEX-ASCII output (exceeds 80 chars!)
- c<ENTER>
- - toggle color mode
- #<ENTER>
- - notch currently marked/changed bits (can be used repeatedly)
- *<ENTER>
- - clear notched marked
- rMYNAME<ENTER>
- - read settings file (filter/notch)
- wMYNAME<ENTER>
- - write settings file (filter/notch)
+FILTER<ENTER> - add CAN-IDs to sniff
-FILTER<ENTER> - remove CAN-IDs to sniff
FILTER can be a single CAN-ID or a CAN-ID/Bitmask:¶
+1F5<ENTER> - add CAN-ID 0x1F5
-42E<ENTER> - remove CAN-ID 0x42E
-42E7FF<ENTER> - remove CAN-ID 0x42E (using Bitmask)
-500700<ENTER> - remove CAN-IDs 0x500 - 0x5FF
+400600<ENTER> - add CAN-IDs 0x400 - 0x5FF
+000000<ENTER> - add all CAN-IDs
-000000<ENTER> - remove all CAN-IDs
if (id & filter) == (sniff-id & filter) the action (+/-) is performed, which is quite easy when the filter is 000
| February 2018 | cansniffer 2018.02.0-1 |