Scroll to navigation

FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)

NAME

fence_sanbox2 - Fence agent for QLogic SANBox2 FC switches

DESCRIPTION

fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC switches. It logs into a SANBox2 switch via telnet and disables a specified port. Disabling the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

fence_sanbox2 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_sanbox2 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.qlogic.com

PARAMETERS

-o, --action=[action]
Fencing action (Default Value: off)
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: [' #> '])
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always required.
-l, --username=[name]
Login name This parameter is always required.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

on
Power on machine.
off
Power off machine.
status
This returns the status of the plug/virtual machine.
list
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.

STDIN PARAMETERS

action
Fencing action (Default Value: off)
command_prompt
Force Python regex for command prompt (Default Value: [' #> ']) Obsoletes: cmd_prompt
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ip
IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
ipport
TCP/UDP port to use for connection with device (Default Value: 23)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug
Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port
username
Login name This parameter is always required. Obsoletes: login
quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
verbose
Verbose mode
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help
Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay
Wait X seconds before fencing is started (Default Value: 0)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)
2009-10-20 fence_sanbox2 (Fence Agent)