Man Pages¶

man

This is the classical macro package for Unix manual pages (man pages); it is quite handy and easy to use; see groff_man(7).

doc

mdoc

An alternative macro package for man pages mainly used in BSD systems; it provides many new features, but it is not the standard for man pages; see groff_mdoc(7).

andoc

mandoc

Use this file in case you don't know whether the man macros or the mdoc package should be used. Multiple man pages (in either format) can be handled.

Full Packages¶

me

The classical me macro package; see groff_me(7).

mm

The semi-classical mm macro package; see groff_mm(7).

mom

The new mom macro package, only available in groff. As this is not based on other packages, it can be freely designed. So it is expected to become quite a nice, modern macro package. See groff_mom(7).

ms

The classical ms macro package; see groff_ms(7).

Language-specific Packages¶

cs

This file adds support for Czech localization, including the main macro packages (me, mom, mm, and ms).

Note that cs.tmac sets the input encoding to latin-2.

de

den

German localization support, including the main macro packages (me, mom, mm, and ms).

de.tmac selects hyphenation patterns for traditional orthography, and den.tmac does the same for the new orthography (‘Rechtschreibreform’). It should be used as the last macro package on the command line.

fr

This file adds support for French localization, including the main macro packages (me, mom, mm, and ms). Example:

Note that fr.tmac sets the input encoding to latin-9 to get proper support of the ‘oe’ ligature.

sv

Swedish localization support, including the me, mom, and ms macro packages. Note that Swedish for the mm macros is handled separately; see groff_mmse(7) (only in Swedish locales). It should be used as the last macro package on the command line.

Input Encodings¶

latin1

latin2

latin5

latin9

Various input encodings supported directly by groff. Normally, this macro is loaded at the very beginning of a document or specified as the first macro argument on the command line. roff loads latin1 by default at start-up. Note that these macro packages don't work on EBCDIC hosts.

cp1047

Encoding support for EBCDIC. On those platforms it is loaded automatically at start-up. Due to different character ranges used in roff it doesn't work on architectures which are based on ASCII.

Note that it can happen that some input encoding characters are not available for a particular output device. For example, saying

groff -Tlatin1 -mlatin9 ...

fails if you use the Euro character in the input. Usually, this limitation is present only for devices which have a limited set of output glyphs (-Tascii, -Tlatin1); for other devices it is usually sufficient to install proper fonts which contain the necessary glyphs.

Special Packages¶

62bit

Provides macros for addition, multiplication, and division of 62-bit integers (allowing safe multiplication of 31-bit integers, for example).

ec

Switch to the EC and TC font families. To be used with grodvi(1) – this man page also gives more details of how to use it.

hdtbl

The Heidelberger table macros, contributed by Joachim Walsdorff, allow the generation of tables through a syntax similar to the HTML table model. Note that hdtbl is a macro package, not a preprocessor like tbl(1). hdtbl works only with the -Tps and -Tpdf output devices. See groff_hdtbl(7).

papersize

This macro file is already loaded at start-up by troff so it isn't necessary to call it explicitly. It provides an interface to set the paper size on the command line with the option -dpaper=size. Possible values for size are the same as the predefined papersize values in the DESC file (only lowercase; see groff_font(5) for more) except a7–d7. An appended l (ell) character denotes landscape orientation. Examples: a4, c3l, letterl.

Most output drivers need additional command-line switches -p and -l to override the default paper length and orientation as set in the driver-specific DESC file. For example, use the following for PS output on A4 paper in landscape orientation:

sh# groff -Tps -dpaper=a4l -P-pa4 -P-l -ms foo.ms > foo.ps
    

pdfpic

A single macro is provided in this file, PSPIC, to include a PDF graphic in a document, i.e., under the output device -Tpdf. For all other devices, pspic is used. So pdfpic is an extension of pspic. By that you can now even replace all PSPIC by PDFPIC, nothing gets lost by that. The options of PDFPIC are identical to the PSDIF options.

pic

This file provides proper definitions for the macros PS and PE, needed for the pic(1) preprocessor. They center each picture. Use it only if your macro package doesn't provide proper definitions for those two macros (actually, most of them already do).

pspic

A single macro is provided in this file, PSPIC, to include a PostScript graphic in a document. The following output devices support inclusion of PS images: -Tps, -Tdvi, -Thtml, and -Txhtml; for all other devices the image is replaced with a hollow rectangle of the same size. This macro file is already loaded at start-up by troff so it isn't necessary to call it explicitly.

Syntax:

file is the name of the PostScript file; width and height give the desired width and height of the image. If neither a width nor a height argument is specified, the image's natural width (as given in the file's bounding box) or the current line length is used as the width, whatever is smaller. The width and height arguments may have scaling indicators attached; the default scaling indicator is i. This macro scales the graphic uniformly in the x and y directions so that it is no more than width wide and height high. Option -C centers the graphic horizontally, which is the default. The -L and -R options cause the graphic to be left-aligned and right-aligned, respectively. The -I option causes the graphic to be indented by n (default scaling indicator is m).

For use of .PSPIC within a diversion it is recommended to extend it with the following code, assuring that the diversion's width completely covers the image's width.

ptx

A single macro is provided in this file, xx, for formatting permuted index entries as produced by the GNU ptx(1) program. In case you need a different formatting, copy the macro into your document and adapt it to your needs.

trace

Use this for tracing macro calls. It is only useful for debugging. See groff_trace(7).

tty-char

Overrides the definition of standard troff characters and some groff characters for TTY devices. The optical appearance is intentionally inferior compared to that of normal TTY formatting to allow processing with critical equipment.

www

Additions of elements known from the HTML format, as used in the internet (World Wide Web) pages; this includes URL links and mail addresses; see groff_www(7).

Copy-in Mode¶

In this phase, groff interprets all backslashes; that means that all escape sequences in the macro body are interpreted and replaced by their value. For constant expressions, this is wanted, but strings and registers that might change between calls of the macro must be protected from being evaluated. This is most easily done by doubling the backslash that introduces the escape sequence. This doubling is most important for the positional parameters. For example, to print information on the arguments that were passed to the macro to the terminal, define a macro named ‘.print_args’, say.

.ds midpart was called with
.de print_args
.  tm \f[I]\\$0\f[] \*[midpart] \\n[.$] arguments:
.  tm \\$*
..
    

When calling this macro by

.print_args arg1 arg2
    

the following text is printed to the terminal:

print_args was called with the following 2 arguments:
arg1 arg2
    

Let's analyze each backslash in the macro definition. As the positional parameters and the number of arguments change with each call of the macro their leading backslash must be doubled, which results in \\$* and \\[.$]. The same applies to the macro name because it could be called with an alias name, so \\$0.

On the other hand, midpart is a constant string, it does not change, so no doubling for \*[midpart]. The \f escape sequences are predefined groff elements for setting the font within the text. Of course, this behavior does not change, so no doubling with \f[I] and \f[].

Draft Mode¶

.eo
.ds midpart was called with
.de print_args
.  tm \f[I]\$0\f[] \*[midpart] \n[.$] arguments:
.  tm \$*
..
.ec
    

Unfortunately, draft mode cannot be used universally. Although it is good enough for defining normal macros, draft mode fails with advanced applications, such as indirectly defined strings, registers, etc. An optimal way is to define and test all macros in draft mode and then do the backslash doubling as a final step; do not forget to remove the .eo request.

Tips for Macro Definitions¶

•

Start every line with a dot, for example, by using the groff request .nop for text lines, or write your own macro that handles also text lines with a leading dot.

•

Write a comment macro that works both for copy-in and draft mode; for as escaping is off in draft mode, trouble might occur when normal comments are used. For example, the following macro just ignores its arguments, so it acts like a comment line:

• In long macro definitions, make ample use of comment lines or almost-empty lines (this is, lines which have a leading dot and nothing else) for a better structuring.
• To increase readability, use groff's indentation facility for requests and macro calls (arbitrary whitespace after the leading dot).

Diversions¶

In their simplest form, diversions are multi-line strings, but they get their power when diversions are used dynamically within macros. The (formatted) information stored in a diversion can be retrieved by calling the diversion just like a macro.

Most of the problems arising with diversions can be avoided if you remain aware of the fact that diversions always store complete lines. If diversions are used when the line buffer has not been flushed, strange results are produced; not knowing this, many people get desperate about diversions. To ensure that a diversion works, line breaks should be added at the right places. To be on the secure side, enclose everything that has to do with diversions into a pair of line breaks; for example, by explicitly using .br requests. This rule should be applied to diversion definition, both inside and outside, and to all calls of diversions. This is a bit of overkill, but it works nicely.

[If you really need diversions which should ignore the current partial line, use environments to save the current partial line and/or use the .box request.]

The most powerful feature using diversions is to start a diversion within a macro definition and end it within another macro. Then everything between each call of this macro pair is stored within the diversion and can be manipulated from within the macros.