table of contents
Config::Model::models::LCDd::glcd(3pm) | User Contributed Perl Documentation | Config::Model::models::LCDd::glcd(3pm) |
NAME¶
Config::Model::models::LCDd::glcd - Configuration class LCDd::glcdDESCRIPTION¶
Configuration classes used by Config::Modelgenerated from LCDd.conf
Elements¶
Brightness¶
Set brightness of the backlight if the backlight is switched 'on'. Optional. Type integer.- upstream_default value :
- 800
CellSize¶
Width and height of a character cell in pixels. This value is only used if the driver has been compiled with FreeType and it is enabled. Otherwise the default 6x8 cell is used. Optional. Type uniline.- upstream_default value :
- 12x16
ConnectionType¶
Select what type of connection. See documentation for types. Optional. Type uniline.- default value :
- t6963
Contrast¶
Set the initial contrast if supported by connection type. Optional. Type integer.- upstream_default value :
- 600
KeyMap_A¶
Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'. By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape. Optional. Type uniline.- default value :
- Up
KeyMap_B¶
Optional. Type uniline.- default value :
- Down
KeyMap_C¶
Optional. Type uniline.- default value :
- Enter
KeyMap_D¶
Optional. Type uniline.- default value :
- Escape
KeyRepeatDelay¶
Time (ms) from first key report to first repeat. Set to 0 to disable repeated key reports. Optional. Type integer.- upstream_default value :
- 500
KeyRepeatInterval¶
Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled (set to zero). Optional. Type integer.- upstream_default value :
- 300
OffBrightness¶
Set brightness of the backlight if the backlight is switched 'off'. Set this to zero to completely turn off the backlight. Optional. Type integer.- upstream_default value :
- 100
Port¶
--- t6963 options --- Parallel port to use legal: 0x200-0x400 Optional. Type uniline.- upstream_default value :
- 0x378
Size¶
Width and height of the display in pixel. The supported sizes may depend on the ConnectionType. legal: 1x1-640x480 Optional. Type uniline.- upstream_default value :
- 128x64
bidirectional¶
Use LPT port in bi-directional mode. This should work on most LPT port and is required for proper timing! Optional. Type boolean.- upstream_default value :
- yes
delayBus¶
Insert additional delays into reads / writes. Optional. Type boolean.- upstream_default value :
- no
fontHasIcons¶
Some fonts miss the Unicode characters used to represent icons. In this case the built-in 5x8 font can used if this option is turned off. Optional. Type boolean.- upstream_default value :
- yes
normal_font¶
Path to font file to use for FreeType rendering. This font must be monospace and should contain some special Unicode characters like arrows (Andale Mono is recommended and can be fetched at http://corefonts.sf.net). Optional. Type uniline.- upstream_default value :
- /usr/local/lib/X11/fonts/TTF/andalemo.ttf
picolcdgfx_Inverted¶
Inverted: Inverts the pixels. Optional. Type enum. choice: 'yesorno'.- upstream_default value :
- no
picolcdgfx_KeyTimeout¶
--- picolcdgfx options --- Time in ms for usb_read to wait on a key press. Optional. Type integer.- upstream_default value :
- 125
serdisp_device¶
The display device to use, e.g. serraw:/dev/ttyS0, parport:/dev/parport0 or USB:07c0/1501. Optional. Type uniline.- default value :
- /dev/ppi0
serdisp_name¶
--- serdisplib options --- Name of the underlying serdisplib driver, e.g. ctinclud. See serdisplib documentation for details. Optional. Type uniline.- default value :
- t6963
serdisp_options¶
Options string to pass to serdisplib during initialization. Use this to set any display related options (e.g. wiring). The display size is always set based on the Size configured above! By default, no options are set. Important: The value must be quoted as it contains equal signs! Optional. Type uniline.- upstream_default value :
- INVERT=1
useFT2¶
If LCDproc has been compiled with FreeType 2 support this option can be used to turn if off intentionally. Optional. Type boolean.- upstream_default value :
- yes
x11_BacklightColor¶
BacklightColor: The color of the backlight as full brightness. Optional. Type uniline.- upstream_default value :
- 0x80FF80
x11_Border¶
Border: Adds a border (empty space) around the LCD portion of X11 window. Optional. Type uniline.- upstream_default value :
- 20
x11_Inverted¶
Inverted: inverts the pixels Optional. Type boolean.- upstream_default value :
- no
x11_PixelColor¶
Colors are in RRGGBB format prefixed with "0x". PixelColor: The color of each dot at full contrast. Optional. Type uniline.- upstream_default value :
- 0x000000
x11_PixelSize¶
--- x11 options --- PixelSize is size of each dot in pixels + a pixel gap. Optional. Type uniline.- upstream_default value :
- 3+1
SEE ALSO¶
- •
- cme
2017-12-13 | perl v5.26.1 |