ZIP_SOURCE_FUNCTION(3)

Library Functions Manual

ZIP_SOURCE_FUNCTION(3)

NAME¶

zip_source_function, zip_source_function_create —

create data source from function

LIBRARY¶

libzip (-lzip)

SYNOPSIS¶

#include <zip.h>

zip_source_t *
zip_source_function(zip_t *archive, zip_source_callback fn, void *userdata);

zip_source_t *
zip_source_function_create(zip_source_callback fn, void *userdata, zip_error_t *error);

DESCRIPTION¶

The functions zip_source_function() and zip_source_function_create() creates a zip source from the user-provided function fn, which must be of the following type:

typedef zip_int64_t (*zip_source_callback)(void *userdata, void *data, zip_uint64_t len, zip_source_cmd_t cmd);

archive or error are used for reporting errors and can be NULL.

When called by the library, the first argument is the userdata argument supplied to the function. The next two arguments are a buffer data of size len when data is passed in or expected to be returned, or else NULL and 0. The last argument, cmd, specifies which action the function should perform.

Depending on the uses, there are three useful sets of commands to be supported by a zip_source_callback():

read source: Providing streamed data (for file data added to archives). Must support ZIP_SOURCE_OPEN, ZIP_SOURCE_READ, ZIP_SOURCE_CLOSE, ZIP_SOURCE_STAT, and ZIP_SOURCE_ERROR.
seekable read source: Same as previous, but from a source allowing reading from arbitrary offsets (also for read-only zip archive). Must additionally support ZIP_SOURCE_SEEK, ZIP_SOURCE_TELL, and ZIP_SOURCE_SUPPORTS.
read/write source: Same as previous, but additionally allowing writing (also for writable zip archives). Must additionally support ZIP_SOURCE_BEGIN_WRITE, ZIP_SOURCE_COMMIT_WRITE, ZIP_SOURCE_ROLLBACK_WRITE, ZIP_SOURCE_SEEK_WRITE, ZIP_SOURCE_TELL_WRITE, and ZIP_SOURCE_REMOVE.

ZIP_SOURCE_BEGIN_WRITE¶

Prepare the source for writing. Use this to create any temporary file(s).

ZIP_SOURCE_BEGIN_WRITE_CLONING¶

Prepare the source for writing, keeping the first len bytes of the original file. Only implement this command if it is more efficient than copying the data, and if it does not destructively overwrite the original file (you still have to be able to execute ZIP_SOURCE_ROLLBACK_WRITE).

The next write should happen at byte offset.

ZIP_SOURCE_CLOSE¶

Reading is done.

ZIP_SOURCE_COMMIT_WRITE¶

Finish writing to the source. Replace the original data with the newly written data. Clean up temporary files or internal buffers. Subsequently opening and reading from the source should return the newly written data.

ZIP_SOURCE_ERROR¶

Get error information. data points to an array of two ints, which should be filled with the libzip error code and the corresponding system error code for the error that occurred. See zip_errors(3) for details on the error codes. If the source stores error information in a zip_error_t, use zip_error_to_data(3) and return its return value. Otherwise, return 2 * sizeof(int).

ZIP_SOURCE_FREE¶

Clean up and free all resources, including userdata. The callback function will not be called again.

ZIP_SOURCE_OPEN¶

Prepare for reading.

ZIP_SOURCE_READ¶

Read data into the buffer data of size len. Return the number of bytes placed into data on success, and zero for end-of-file.

ZIP_SOURCE_REMOVE¶

Remove the underlying file. This is called if a zip archive is empty when closed.

ZIP_SOURCE_ROLLBACK_WRITE¶

Abort writing to the source. Discard written data. Clean up temporary files or internal buffers. Subsequently opening and reading from the source should return the original data.

ZIP_SOURCE_SEEK¶

Specify position to read next byte from, like fseek(3). Use ZIP_SOURCE_GET_ARGS(3) to decode the arguments into the following struct:

struct zip_source_args_seek {
    zip_int64_t offset;
    int whence;
};

If the size of the source's data is known, use zip_source_seek_compute_offset(3) to validate the arguments and compute the new offset.

ZIP_SOURCE_SEEK_WRITE¶

Specify position to write next byte to, like fseek(3). See ZIP_SOURCE_SEEK for details.

ZIP_SOURCE_STAT¶

Get meta information for the input data. data points to an allocated struct zip_stat, which should be initialized using zip_stat_init(3) and then filled in.

For uncompressed, unencrypted data, all information is optional. However, fill in as much information as is readily available.

If the data is compressed, ZIP_STAT_COMP_METHOD, ZIP_STAT_SIZE, and ZIP_STAT_CRC must be filled in.

If the data is encrypted, ZIP_STAT_ENCRYPTION_METHOD, ZIP_STAT_COMP_METHOD, ZIP_STAT_SIZE, and ZIP_STAT_CRC must be filled in.

Information only available after the source has been read (e.g., size) can be omitted in an earlier call. NOTE: zip_source_function() may be called with this argument even after being called with ZIP_SOURCE_CLOSE.

Return sizeof(struct zip_stat) on success.

ZIP_SOURCE_SUPPORTS¶

Return bitmap specifying which commands are supported. Use zip_source_make_command_bitmap(3). If this command is not implemented, the source is assumed to be a read source without seek support.

ZIP_SOURCE_TELL¶

Return the current read offset in the source, like ftell(3).

ZIP_SOURCE_TELL_WRITE¶

Return the current write offset in the source, like ftell(3).

ZIP_SOURCE_WRITE¶

Write data to the source. Return number of bytes written.

Return Values¶

Commands should return -1 on error. ZIP_SOURCE_ERROR will be called to retrieve the error code. On success, commands return 0, unless specified otherwise in the description above.

Calling Conventions¶

The library will always issue ZIP_SOURCE_OPEN before issuing ZIP_SOURCE_READ, ZIP_SOURCE_SEEK, or ZIP_SOURCE_TELL. When it no longer wishes to read from this source, it will issue ZIP_SOURCE_CLOSE. If the library wishes to read the data again, it will issue ZIP_SOURCE_OPEN a second time. If the function is unable to provide the data again, it should return -1.

ZIP_SOURCE_BEGIN_WRITE or ZIP_SOURCE_BEGIN_WRITE_CLONING will be called before ZIP_SOURCE_WRITE, ZIP_SOURCE_SEEK_WRITE, or ZIP_SOURCE_TELL_WRITE. When writing is complete, either ZIP_SOURCE_COMMIT_WRITE or ZIP_SOURCE_ROLLBACK_WRITE will be called.

ZIP_SOURCE_STAT can be issued at any time.

ZIP_SOURCE_ERROR will only be issued in response to the function returning -1.

ZIP_SOURCE_FREE will be the last command issued; if ZIP_SOURCE_OPEN was called and succeeded, ZIP_SOURCE_CLOSE will be called before ZIP_SOURCE_FREE, and similarly for ZIP_SOURCE_BEGIN_WRITE or ZIP_SOURCE_BEGIN_WRITE_CLONING and ZIP_SOURCE_COMMIT_WRITE or ZIP_SOURCE_ROLLBACK_WRITE.

RETURN VALUES¶

Upon successful completion, the created source is returned. Otherwise, NULL is returned and the error code in archive or error is set to indicate the error (unless it is NULL).

ERRORS¶

zip_source_function() fails if:

[ZIP_ER_MEMORY]: Required memory could not be allocated.

HISTORY¶

zip_source_function() and zip_source_function_create() were added in libzip 1.0.

AUTHORS¶

Dieter Baron <dillo@nih.at> and Thomas Klausner <tk@giga.or.at>

December 18, 2017

Linux 4.19.0-10-amd64

Source file:	zip_source_function_create.3.en.gz (from libzip-dev 1.5.1-4)
Source last updated:	2019-03-18T08:10:42Z
Converted to HTML:	2020-10-10T21:20:53Z