table of contents
| man(1) | lpc21isp man page | man(1) |
NAME¶
lpc21isp - Is an in-circuit programming (ISP) tool for the NXP(Philips) microcontrollersSYNOPSIS¶
lpc21isp |
[[Options]] [file[ file[] [comport] [baudrate] [Oscillator_in_kHz] |
lpc21isp |
[-bin] [-hex] [-term] [-termonly] [-localecho] [-detectonly] [-debug0] [-debug3] [-debug5] [-donotstart] [-try<n>] [-wipe] [-control] [-controlswap] [-controlinv] [-verify] [-logfile] [-halfduplex] [-ADARM] [-PHILIPSARM] |
DESCRIPTION¶
lpc21isp is an in-circuit programming (ISP) tool for the NXP(Philips) LPC1100/LPC1300/LPC1700/LPC2000 series ARM7/Cortex-M0/Cortex-M3 microcontrollers.OPTIONS¶
- -bin
- for uploading binary file
- -hex
- for uploading file in intel hex format (default)
- -term
- for starting terminal after upload
- -termonly
- for starting terminal without an upload
- -localecho
- for local echo in terminal
- -detectonly
- detect only used LPC chiptype (PHILIPSARM only)
- -debug0
- for no debug
- -debug3
- for progress info only
- -debug5
- for full debug
- -donotstart
- do not start MCU after download
- -try<n>
- try n times to synchronise
- -wipe
- Erase entire device before upload
- -control
- for controlling RS232 lines for easier booting (Reset = DTR, EnableBootLoader = RTS)
- -controlswap
- swap RS232 control lines (Reset = RTS, EnableBootLoader = DTR)
- -controlinv
- Invert state of RTS & DTR (0=true/assert/set, 1=false/deassert/clear).
- -verify
- Verify the data in Flash after every writes to sector. To detect errors in writing to Flash ROM
- -logfile
- for enabling logging of terminal output to lpc21isp.log
- -halfduplex
- use halfduplex serial communication (i.e. with K-Line)
- -ADARM
- for downloading to an Analog Devices ARM microcontroller ADUC70xx
- -PHILIPSARM
- for downloading to a microcontroller from NXP(Philips) LPC13xx/LPC17xx/LPC2000 family (default)
| 02 Aug 2012 | 1.9.4 |