NAZWA¶
mkvinfo - Print information about elements in Matroska files
SZABLON LINII KOMEND¶
mkvinfo [opcje]
{źródłowa-nazwa pliku}
OPIS¶
This program lists all elements contained in a Matroska. The output can be
limited to a list of tracks in the file including information about the codecs
used.
-c, --checksums
Calculates and display the Adler-32 checksum for
each frame. Useful for debugging only.
-s, --summary
Only show a terse summary of what
mkvinfo(1) finds
and not each element.
-t, --track-info
Show statistics for each track in verbose mode. Also sets
verbosity to 1 if it was at level 0 before.
-x, --hexdump
Show the first 16 bytes of each frame as a hex
dump.
-X, --full-hexdump
Pokazuje wszystkie bajty każdej ramki jako zrzut w
formacie hex.
-z, --size
Show the size of each element including its header.
--command-line-charset zestaw-znaków
Sets the character set to convert strings given on the
command line from. It defaults to the character set given by system's current
locale.
--output-charset zestaw-znaków
Sets the character set to which strings are converted
that are to be output. It defaults to the character set given by system's
current locale.
-r, --redirect-output nazwa-pliku
Zapisuje wszystkie powiadomienia do pliku
nazwa-pliku zamiast do konsoli. Podczas kiedy może być to
robione łatwo z przekierowaniem wyjścia, są przypadki
kiedy ta opcja właśnie jest potrzebna: kiedy terminal ponownie
interpretuje plik wyjściowy przed zapisaniem do pliku. Uznawany
będzie zestaw znaków ustawiony z opcją
--output-charset.
--ui-language kod
Forces the translations for the language code to
be used (e.g. 'de_DE' for the German translations). Entering 'list' as the
code will cause the program to output a list of available
translations.
--abort-on-warnings
Tells the program to abort after the first warning is
emitted. The program's exit code will be 1.
--debug temat
Włącza debugowanie dla konkretnej funkcji.
Ta opcja jest użyteczna tylko dla deweloperów.
--engage funkcja
Włącza eksperymentalne
funkcjonalności. Lista dostepnych funkcjonalności jest
dostępna po uruchomieniu komendy mkvinfo --engage list. Te
funkcjonalności nie powinny być używane w normalnych
sytuacjach.
--gui-mode
Turns on GUI mode. In this mode specially-formatted lines
may be output that can tell a controlling GUI what's happening. These messages
follow the format '#GUI#message'. The message may be followed by key/value
pairs as in '#GUI#message#key1=value1#key2=value2...'. Neither the messages
nor the keys are ever translated and always output in English.
-v, --verbose
Be more verbose. See the section about verbosity levels
for a description which information will be output at which level.
-h, --help
Pokazuje informacje o sposobie użycia opcji i
zamyka się.
-V, --version
Pokazuje informację o wersji i zamyka
się.
@options-file.json
Reads additional command line arguments from the file
options-file. For a full explanation on the supported formats for such
files see the section called "Option files" in the
mkvmerge(1) man page.
POZIOMY SZCZEGÓŁOWOŚCI¶
The -v option can be used to increase mkvinfo(1)'s verbosity level
and print more information about the current file.
At level 0 mkvinfo(1) will print only the track headers it
finds and their types. mkvinfo(1) will exit as soon as the headers
are parsed completely (more technical: as soon as the first cluster is
encountered). In this level the seek head entries and the cues will not be
displayed -- even if they're located in front of the track information.
At level 1 mkvinfo(1) will also print all Matroska elements
encountered for the complete file but the seek head entries and the cue
entries. If the summary mode is enabled then mkvinfo(1) will output
the frame position as well.
At level 2 mkvinfo(1) will also print the seek head
entries, the cue entries and the file position at which each Matroska
element can be found at.
At level 3 and above mkvinfo(1) will print some information
that is not directly connected to a Matroska element. All other elements
only print stuff about the elements that were just found. Level 3 adds meta
information to ease debugging (read: it's intended for developers only). All
lines written by level 3 are enclosed in square brackets to make filtering
them out easy.
TEXT FILES AND CHARACTER SET CONVERSIONS¶
Dla głębszego zrozumienia jak wszystkie narzędzia w
pakiecie MKVToolNix obsługują konwersję zestawu
znaków, kodowanie wejściowe/wyjściowe, kodowanie linii
komend i kodowanie konsoli, zobacz tak samo nazwane sekcje na stronie
obsługi mkvmerge(1)
KODY ZAMKNIĘCIA¶
mkvinfo(1) exits with one of three exit codes:
•0 -- Ten kod zamknięcia oznacza,
że praca została zakończona powodzeniem.
•
1 -- In this case
mkvinfo(1) has
output at least one warning, but the run did continue. A warning is prefixed
with the text 'Warning:'.
•
2 -- This exit code is used after an error
occurred.
mkvinfo(1) aborts right after outputting the error message.
Error messages range from wrong command line arguments over read/write errors
to broken files.
ZMIENNE ŚRODOWISKOWE¶
mkvinfo(1) uses the default variables that determine the system's locale
(e.g. LANG and the LC_* family). Additional variables:
MKVINFO_DEBUG, MKVTOOLNIX_DEBUG i jego
skrócona forma MTX_DEBUG
The content is treated as if it had been passed via the
--debug option.
MKVINFO_ENGAGE, MKVTOOLNIX_ENGAGE i jego
skrócona forma MTX_ENGAGE
The content is treated as if it had been passed via the
--engage option.
STRONA WWW¶
The latest version can always be found at the MKVToolNix homepage[1].
AUTOR¶
Moritz Bunkus <moritz@bunkus.org>
Autor
PRZYPISY¶
- 1.
- the MKVToolNix homepage
