Scroll to navigation
ESFILTER:(1) |
User Commands |
ESFILTER:(1) |
NAME¶
esfilter - Output a filtered or truncated version of a ES
SYNOPSIS¶
esfilter [actions/switches] <infile>
<outfile>
DESCRIPTION¶
- TS tools version 1.11, esfilter built Nov 11 2008 17:15:39
- Output a filtered or truncated version of an elementary stream. The input
is either H.264 (MPEG-4/AVC) or H.262 (MPEG-2). The output is either an
elementary stream, or an H.222 transport stream
- If output is to an H.222 Transport Stream, then fixed values for the PMT
PID (0x66) and video PID (0x68) are used.
Files:¶
- <infile>
- is the input elementary stream (but see -stdin below).
- <outfile> is the output stream, either an equivalent elementary
- stream, or an H.222 Transport Stream (but see -stdout and
-host below).
Actions:¶
- -copy
- Copy the input data to the output file (mostly useful as a way of
truncating data with -max)
- -filter
- Filter data from input to output, aiming to keep every <n>th frame
(where <n> is specified by -freq).
- -strip
- For H.264, output just the IDR and I pictures, for H.262, output just the
I pictures, but see -allref below.
Switches:¶
- -verbose, -v
- Output extra (debugging) messages
- -quiet, -q
- Only output error messages
- -stdin
- Take input from <stdin>, instead of a named file
- -stdout
- Write output to <stdout>, instead of a named file Forces
-quiet.
- -host <host>, -host <host>:<port>
- Writes output (over TCP/IP) to the named <host>, instead of to a
named file. If <port> is not specified, it defaults to 88. Implies
-tsout.
- -max <n>, -m <n>
- Maximum number of frames to read (for -filter and -strip),
or ES units/NAL units (for -copy).
- -freq <n>
- Specify the frequency of frames to try to keep with -filter.
Defaults to 8.
- -allref
- With -strip, keep all reference pictures (H.264) or all I and P
pictures (H.262)
- -tsout
- Output data as Transport Stream PES packets (the default is as Elementary
Stream)
- -pes, -ts
- The input file is TS or PS, to be read via the PES->ES reading
mechanisms. Not allowed with -stdin.
Stream type:¶
- If input is from a file, then the program will look at the start of the
file to determine if the stream is H.264 or H.262 data. This process may
occasionally come to the wrong conclusion, in which case the user can
override the choice using the following switches.
- If input is from standard input (via -stdin), then it is not
possible for the program to make its own decision on the input stream
type. Instead, it defaults to H.262, and relies on the user indicating if
this is wrong.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- TS tools version 1.11, esfilter built Nov 11 2008 17:15:39
- Output a filtered or truncated version of an elementary stream. The input
is either H.264 (MPEG-4/AVC) or H.262 (MPEG-2). The output is either an
elementary stream, or an H.222 transport stream
- If output is to an H.222 Transport Stream, then fixed values for the PMT
PID (0x66) and video PID (0x68) are used.
Files:¶
- <infile>
- is the input elementary stream (but see -stdin below).
- <outfile> is the output stream, either an equivalent elementary
- stream, or an H.222 Transport Stream (but see -stdout and
-host below).
Actions:¶
- -copy
- Copy the input data to the output file (mostly useful as a way of
truncating data with -max)
- -filter
- Filter data from input to output, aiming to keep every <n>th frame
(where <n> is specified by -freq).
- -strip
- For H.264, output just the IDR and I pictures, for H.262, output just the
I pictures, but see -allref below.
Switches:¶
- -verbose, -v
- Output extra (debugging) messages
- -quiet, -q
- Only output error messages
- -stdin
- Take input from <stdin>, instead of a named file
- -stdout
- Write output to <stdout>, instead of a named file Forces
-quiet.
- -host <host>, -host <host>:<port>
- Writes output (over TCP/IP) to the named <host>, instead of to a
named file. If <port> is not specified, it defaults to 88. Implies
-tsout.
- -max <n>, -m <n>
- Maximum number of frames to read (for -filter and -strip),
or ES units/NAL units (for -copy).
- -freq <n>
- Specify the frequency of frames to try to keep with -filter.
Defaults to 8.
- -allref
- With -strip, keep all reference pictures (H.264) or all I and P
pictures (H.262)
- -tsout
- Output data as Transport Stream PES packets (the default is as Elementary
Stream)
- -pes, -ts
- The input file is TS or PS, to be read via the PES->ES reading
mechanisms. Not allowed with -stdin.
Stream type:¶
- If input is from a file, then the program will look at the start of the
file to determine if the stream is H.264 or H.262 data. This process may
occasionally come to the wrong conclusion, in which case the user can
override the choice using the following switches.
- If input is from standard input (via -stdin), then it is not
possible for the program to make its own decision on the input stream
type. Instead, it defaults to H.262, and relies on the user indicating if
this is wrong.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
SEE ALSO¶
The full documentation for esfilter is maintained as a Texinfo manual.
Please check http://tstools.berlios.de for more information.