table of contents
other versions
| PERF_5.16-ANNOTATE(1) | perf Manual | PERF_5.16-ANNOTATE(1) |
NAME¶
perf-annotate - Read perf.data (created by perf record) and display annotated code
SYNOPSIS¶
perf annotate [-i <file> | --input=file] [symbol_name]
DESCRIPTION¶
This command reads the input file and displays an annotated version of the code. If the object file has debug symbols then the source code will be displayed alongside assembly code.
If there is no debug info in the object, then annotated assembly is displayed.
OPTIONS¶
-i, --input=<file>
Input file name. (default: perf.data unless stdin is a
fifo)
-d, --dsos=<dso[,dso...]>
Only consider symbols in these dsos.
-s, --symbol=<symbol>
Symbol to annotate.
-f, --force
Don’t do ownership validation.
-v, --verbose
Be more verbose. (Show symbol address, etc)
-q, --quiet
Do not show any message. (Suppress -v)
-n, --show-nr-samples
Show the number of samples for each symbol
-D, --dump-raw-trace
Dump raw trace in ASCII.
-k, --vmlinux=<file>
vmlinux pathname.
--ignore-vmlinux
Ignore vmlinux files.
--itrace
Options for decoding instruction tracing data. The
options are:
i synthesize instructions events b synthesize branches events (branch misses for Arm SPE) c synthesize branches events (calls only) r synthesize branches events (returns only) x synthesize transactions events w synthesize ptwrite events p synthesize power events (incl. PSB events for Intel PT) o synthesize other events recorded due to the use
of aux-output (refer to perf record) e synthesize error events d create a debug log f synthesize first level cache events m synthesize last level cache events M synthesize memory events t synthesize TLB events a synthesize remote access events g synthesize a call chain (use with i or x) G synthesize a call chain on existing event records l synthesize last branch entries (use with i or x) L synthesize last branch entries on existing event records s skip initial number of events q quicker (less detailed) decoding A approximate IPC Z prefer to ignore timestamps (so-called "timeless" decoding)
The default is all events i.e. the same as --itrace=ibxwpe, except for perf script where it is --itrace=ce
In addition, the period (default 100000, except for perf script where it is 1) for instructions events can be specified in units of:
i instructions t ticks ms milliseconds us microseconds ns nanoseconds (default)
Also the call chain size (default 16, max. 1024) for instructions or transactions events can be specified.
Also the number of last branch entries (default 64, max. 1024) for instructions or transactions events can be specified.
Similar to options g and l, size may also be specified for options G and L. On x86, note that G and L work poorly when data has been recorded with large PEBS. Refer linkperf:perf-intel-pt[1] man page for details.
It is also possible to skip events generated (instructions, branches, transactions, ptwrite, power) at the beginning. This is useful to ignore initialization code.
--itrace=i0nss1000000
skips the first million instructions.
The 'e' option may be followed by flags which affect what errors will or will not be reported. Each flag must be preceded by either '+' or '-'. The flags are:
o overflow
l trace data lost
If supported, the 'd' option may be followed by flags which affect what debug messages will or will not be logged. Each flag must be preceded by either '+' or '-'. The flags are:
a all perf events
o output to stdout
If supported, the 'q' option may be repeated to increase the effect.
To disable decoding entirely, use --no-itrace.
-m, --modules
Load module symbols. WARNING: use only with -k and LIVE
kernel.
-l, --print-line
Print matching source lines (may be slow).
-P, --full-paths
Don’t shorten the displayed pathnames.
--stdio
Use the stdio interface.
--stdio2
Use the stdio2 interface, non-interactive, uses the TUI
formatting.
--stdio-color=<mode>
always, never or auto, allowing
configuring color output via the command line, in addition to via
"color.ui" .perfconfig. Use --stdio-color always to generate
color even when redirecting to a pipe or file. Using just --stdio-color
is equivalent to using always.
--tui
Use the TUI interface. Use of --tui requires a tty, if
one is not present, as when piping to other commands, the stdio interface is
used. This interfaces starts by centering on the line with more samples,
TAB/UNTAB cycles through the lines with more samples.
--gtk
Use the GTK interface.
-C, --cpu=<cpu>
Only report samples for the list of CPUs provided.
Multiple CPUs can be provided as a comma-separated list with no space: 0,1.
Ranges of CPUs are specified with -: 0-2. Default is to report samples on all
CPUs.
--asm-raw
Show raw instruction encoding of assembly
instructions.
--show-total-period
Show a column with the sum of periods.
--source
Interleave source code with assembly code. Enabled by
default, disable with --no-source.
--symfs=<directory>
Look for files with symbols relative to this
directory.
-M, --disassembler-style=
Set disassembler style for objdump.
--objdump=<path>
Path to objdump binary.
--prefix=PREFIX, --prefix-strip=N
Remove first N entries from source file path names in
executables and add PREFIX. This allows to display source code compiled on
systems with different file system layout.
--skip-missing
Skip symbols that cannot be annotated.
--group
Show event group information together
--demangle
Demangle symbol names to human readable form. It’s
enabled by default, disable with --no-demangle.
--demangle-kernel
Demangle kernel symbol names to human readable form (for
C++ kernels).
--percent-type
Set annotation percent type from following choices:
global-period, local-period, global-hits, local-hits
The local/global keywords set if the percentage is computed in the scope of the function (local) or the whole data (global). The period/hits keywords set the base the percentage is computed on - the samples period or the number of samples (hits).
SEE ALSO¶
perf-record(1), perf-report(1)
| 2022-01-03 | perf |