| IPACCESS-CONFIG(1) | IPACCESS-CONFIG(1) |
NAME¶
ipaccess-config - Tool to configure an ip.access nanoBTS
SYNOPSIS¶
ipaccess-config [options] <IP_OF_BTS>
DESCRIPTION¶
ipaccess-config is a small command line tool to configure an ip.access nanoBTS.
You can use this tool to perform basic operations such as setting NVRAM parameters or performing tests.
It is part of the OpenBSC base station controller from Osmocom.
OPTIONS¶
Commands for writing to the BTS:
- -u --unit-id UNIT_ID
- Set the Unit ID of the BTS
- -o --oml-ip IP
- Set primary OML IP (IP of your BSC)
- -i --ip-address IP/MASK
- Set static IP address + netmask of BTS
- -g --ip-gateway IP
- Set static IP gateway of BTS
- -r --restart
- Restart the BTS (after other operations)
- -n --nvram-flags FLAGS/MASK
- Set NVRAM attributes
- -S --nvattr-set FLAG
- Set one additional NVRAM attribute
- -U --nvattr-unset FLAG
- Set one additional NVRAM attribute
- -l --listen TESTNR
- Perform specified test number
- -L --Listen TEST_NAME
- Perform specified test
- -s --stream-id ID
- Set the IPA Stream Identifier for OML
- -d --software FIRMWARE
- Download firmware into BTS
Miscellaneous commands:
- -h --help
- this text
- -H --HELP
- Print parameter details.
- -f --firmware FIRMWARE
- Provide firmware information
- -w --write-firmware
- This will dump the firmware parts to the filesystem. Use with -f.
- -p --loop
- Loop the tests executed with the --listen command.
SEE ALSO¶
ipaccess-find(1)
AUTHOR¶
This manual page was written by Ruben Undheim
<ruben.undheim@gmail.com> for the Debian project (and may be used by
others).
| 23 March 2023 |