Scroll to navigation

coroutine(3tcl) Tcl Built-In Commands coroutine(3tcl)


NAME

coroutine, yield, yieldto, coroinject, coroprobe - Create and produce values from coroutines

SYNOPSIS

coroutine name command ?arg...?
yield ?value?
yieldto command ?arg...?
name ?value...?

coroinject coroName command ?arg...?
coroprobe coroName command ?arg...?

DESCRIPTION

The coroutine command creates a new coroutine context (with associated command) named name and executes that context by calling command, passing in the other remaining arguments without further interpretation. Once command returns normally or with an exception (e.g., an error) the coroutine context name is deleted.

Within the context, values may be generated as results by using the yield command; if no value is supplied, the empty string is used. When that is called, the context will suspend execution and the coroutine command will return the argument to yield. The execution of the context can then be resumed by calling the context command, optionally passing in the single value to use as the result of the yield call that caused the context to be suspended. If the coroutine context never yields and instead returns conventionally, the result of the coroutine command will be the result of the evaluation of the context.

The coroutine may also suspend its execution by use of the yieldto command, which instead of returning, cedes execution to some command called command (resolved in the context of the coroutine) and to which any number of arguments may be passed. Since every coroutine has a context command, yieldto can be used to transfer control directly from one coroutine to another (this is only advisable if the two coroutines are expecting this to happen) but any command may be the target. If a coroutine is suspended by this mechanism, the coroutine processing can be resumed by calling the context command optionally passing in an arbitrary number of arguments. The return value of the yieldto call will be the list of arguments passed to the context command; it is up to the caller to decide what to do with those values.

The recommended way of writing a version of yield that allows resumption with multiple arguments is by using yieldto and the return command, like this:

proc yieldMultiple {value} {

tailcall yieldto string cat $value }

The coroutine can also be deleted by destroying the command name, and the name of the current coroutine can be retrieved by using info coroutine. If there are deletion traces on variables in the coroutine's implementation, they will fire at the point when the coroutine is explicitly deleted (or, naturally, if the command returns conventionally).

At the point when command is called, the current namespace will be the global namespace and there will be no stack frames above it (in the sense of upvar and uplevel). However, which command to call will be determined in the namespace that the coroutine command was called from.

A suspended coroutine (i.e., one that has yielded or yieldto-d) may have its state inspected (or modified) at that point by using coroprobe to run a command at the point where the coroutine is at. The command takes the name of the coroutine to run the command in, coroName, and the name of a command (any any arguments it requires) to immediately run at that point. The result of that command is the result of the coroprobe command, and the gross state of the coroutine remains the same afterwards (i.e., the coroutine is still expecting the results of a yield or yieldto as before) though variables may have been changed.

Similarly, the coroinject command may be used to place a command to be run inside a suspended coroutine (when it is resumed) to process arguments, with quite a bit of similarity to coroprobe. However, with coroinject there are several key differences:

  • The coroutine is not immediately resumed after the injection has been done. A consequence of this is that multiple injections may be done before the coroutine is resumed. There injected commands are performed in reverse order of definition (that is, they are internally stored on a stack).
  • An additional two arguments are appended to the list of arguments to be run (that is, the command and its args are extended by two elements). The first is the name of the command that suspended the coroutine (yield or yieldto), and the second is the argument (or list of arguments, in the case of yieldto) that is the current resumption value.
  • The result of the injected command is used as the result of the yield or yieldto that caused the coroutine to become suspended. Where there are multiple injected commands, the result of one becomes the resumption value processed by the next.

The injection is a one-off. It is not retained once it has been executed. It may yield or yieldto as part of its execution.

Note that running coroutines may be neither probed nor injected; the operations may only be applied to

EXAMPLES

This example shows a coroutine that will produce an infinite sequence of even values, and a loop that consumes the first ten of them.

proc allNumbers {} {

yield
set i 0
while 1 {
yield $i
incr i 2
} } coroutine nextNumber allNumbers for {set i 0} {$i < 10} {incr i} {
puts "received [nextNumber]" } rename nextNumber {}

In this example, the coroutine acts to add up the arguments passed to it.

coroutine accumulator apply {{} {

set x 0
while 1 {
incr x [yield $x]
} }} for {set i 0} {$i < 10} {incr i} {
puts "$i -> [accumulator $i]" }

This example demonstrates the use of coroutines to implement the classic Sieve of Eratosthenes algorithm for finding prime numbers. Note the creation of coroutines inside a coroutine.

proc filterByFactor {source n} {

yield [info coroutine]
while 1 {
set x [$source]
if {$x % $n} {
yield $x
}
} } coroutine allNumbers apply {{} {while 1 {yield [incr x]}}} coroutine eratosthenes apply {c {
yield
while 1 {
set n [$c]
yield $n
set c [coroutine prime$n filterByFactor $c $n]
} }} allNumbers for {set i 1} {$i <= 20} {incr i} {
puts "prime#$i = [eratosthenes]" }

This example shows how a value can be passed around a group of three coroutines that yield to each other:

proc juggler {name target {value ""}} {

if {$value eq ""} {
set value [yield [info coroutine]]
}
while {$value ne ""} {
puts "$name : $value"
set value [string range $value 0 end-1]
lassign [yieldto $target $value] value
} } coroutine j1 juggler Larry [
coroutine j2 juggler Curly [
coroutine j3 juggler Moe j1]] "Nyuck!Nyuck!Nyuck!"

This example shows a simple coroutine that collects non-empty values and returns a list of them when not given an argument. It also shows how we can look inside the coroutine to find out what it is doing, and how we can modify the input on a one-off basis.

proc collectorImpl {} {

set me [info coroutine]
set accumulator {}
for {set val [yield $me]} {$val ne ""} {set val [yield]} {
lappend accumulator $val
}
return $accumulator } coroutine collect collectorImpl collect 123 collect "abc def" collect 456 puts [coroprobe collect set accumulator] # ==> 123 {abc def} 456 collect "pqr" coroinject collect apply {{type value} {
puts "Received '$value' at a $type in [info coroutine]"
return [string toupper $value] }} collect rst # ==> Received 'rst' at a yield in ::collect collect xyz puts [collect] # ==> 123 {abc def} 456 pqr RST xyz

This example shows a simple coroutine that collects non-empty values and returns a list of them when not given an argument. It also shows how we can look inside the coroutine to find out what it is doing.

DETAILED SEMANTICS

This example demonstrates that coroutines start from the global namespace, and that command resolution happens before the coroutine stack is created.

proc report {where level} {

# Where was the caller called from?
set ns [uplevel 2 {namespace current}]
yield "made $where $level context=$ns name=[info coroutine]" } proc example {} {
report outer [info level] } namespace eval demo {
proc example {} {
report inner [info level]
}
proc makeExample {} {
puts "making from [info level]"
puts [coroutine coroEg example]
}
makeExample }

Which produces the output below. In particular, we can see that stack manipulation has occurred (comparing the levels from the first and second line) and that the parent level in the coroutine is the global namespace. We can also see that coroutine names are local to the current namespace if not qualified, and that coroutines may yield at depth (e.g., in called procedures).

making from 2
made inner 1 context=:: name=::demo::coroEg

SEE ALSO

apply(3tcl), info(3tcl), proc(3tcl), return(3tcl)

KEYWORDS

coroutine, generator

8.6 Tcl