NAME¶

DPGEN_DFFT - Dynamic Flip-Flop with Scan-Path Macro-Generator

SYNOPSIS¶

#include <genlib.h> void GENLIB_MACRO (DPGEN_DFFT, char * modelname, long flags, long N);

DESCRIPTION¶

Generate a N bits dynamic flip-flop with scan-path named modelname. The two latches of this flip-flop are dynamic, i.e. the data is stored in a capacitor. How it works :

•

scan when set to '1' enables the scan-path mode. Note that in scan-path mode, the wen signal is not effective.

•

scin : the input of the scan-path. This terminal is different from i0[0].

The scout is q[N-1] (in the following example this is q[31]).

•

wen when set to '1' enables the writing of the flip-flop.

TERMINAL NAMES¶

1.

scan : scan-path mode (input, 1 bit).

2.

scin : scan path in (input, 1 bit).

3.

wen : write enable (input, 1 bit).

4.

ck : clock signal (input, 1 bit).

5.

i0 : data input (N bits).

6.

q : output (N bits).

7.

vdd : power.

8.

vss : ground.

EXAMPLE¶

GENLIB_MACRO(DPGEN_DFFT, "model_dfft_32"
                       , F_BEHAV|F_PLACE
                       , 32
                       );

GENLIB_LOINS( "model_dfft_32"
            , "instance1_dfft_32"
            , "scan"
            , "scin"
            , "wen"
            , "ck"
            , "i0[31:0]"
            ,  "q[31:0]"  /* a[31] is "scout". */
            , "vdd", "vss", NULL
            );
    

SEE ALSO¶

GENLIB_MACRO(3), genlib(1)