NAME¶
ce —
driver for synchronous Cronyx Tau-PCI/32 WAN
adapters
SYNOPSIS¶
To compile this driver into the kernel, place the following line in your kernel
configuration file:
device ce
Alternatively, to load the driver as a module at boot time, place the following
line in
loader.conf(5):
Additional options:
device sppp
options NETGRAPH
options NETGRAPH_CRONYX
DESCRIPTION¶
The
ce driver needs either
sppp(4) or
netgraph(4). Which one to use is determined by
the
NETGRAPH_CRONYX option. If this option
is present in your kernel configuration file, the
ce driver will be compiled with
netgraph(4) support. Otherwise, it will be
compiled with
sppp(4) support.
Refer to
sconfig(8) for information about the
ce adapter configuration.
HARDWARE¶
The
ce driver supports the following models
of Tau-PCI/32 WAN adapters:
- Cronyx Tau-PCI/32
- two fractional/unframed E1 interfaces, with 32 HDLC channels shared
between them with total adapter throughput 2048 kbps.
- Cronyx Tau-PCI/32-Lite
- single fractional/unframed E1 interface, with 32 HDLC channels.
SEE ALSO¶
cp(4),
ctau(4),
cx(4),
sppp(4),
ifconfig(8),
sconfig(8),
spppcontrol(8)
HISTORY¶
The
ce driver was added in
FreeBSD 6.2,
FreeBSD 5.5 and
FreeBSD 4.11. The
ce driver for previous versions of
FreeBSD is available from
http://www.cronyx.ru/.
