NAME¶
pam_abl - PAM Auto Blacklist Module
SYNOPSIS¶
Provides auto blacklisting of hosts and users responsible for repeated failed
authentication attempts. Generally configured so that blacklisted users still
see normal login prompts but are guaranteed to fail to authenticate.
This functionality is only available to services which call PAM as root. If
pam_abl is called for uid != 0 it will silently succeed.
DESCRIPTION¶
Brute force password discovery attacks involve repeated attempts to authenticate
against a service using a dictionary of common passwords. While it is
desirable to enforce strong passwords for users this is not always possible
and in cases where a weak password has been used brute force attacks can be
effective.
The pam_abl module monitors failed authentication attempts and automatically
blacklists those hosts (and accounts) that are responsible for large numbers
of failed attempts. Once a host is blacklisted it is guaranteed to fail
authentication even if the correct credentials are provided.
Blacklisting is triggered when the number of failed authentication attempts in a
particular period of time exceeds a predefined limit. Hosts which stop
attempting to authenticate will, after a period of time, be un-blacklisted.
Commands can be specified which will be run when a host or user switches state
from being blocked to clear or clear to blocked. See below or the
pam_abl.conf(5) manpage for the details.
If pam_abl is called for uid != 0 it will silently succeed. If this was not the
case it would be possible for a malicious local user to poison the pam_abl
data by, for example, discovering the names of the hosts from which root
typically logs in and then constructing PAM authentication code to lock out
root login attempts from those hosts.
OPTIONS¶
| Name |
Arguments |
Description |
| debug |
None |
Enable debug output to syslog. |
| expose_account |
None |
Ignored |
| no_warn |
None |
Disable warnings which are otherwise output to syslog. try_first_pass
None Ignored |
| use_first_pass |
None |
Ignored |
| use_mapped_pass |
None |
Ignored |
| config |
Path to the configuration file. |
The configuration file contains additional arguments. In order for the
pam_abl command line tool to work correctly most of the configuration
should be placed in the config file rather than being provided by
arguments. The format of the config file is described below. |
| limits |
Minimum and maximum number of attempts to keep. |
It’s value should have the following syntax
"<minimum>-<maximum>". If you do not block machines
that do too many attempts, the db can easily become bloated. To prevent
this we introduced this setting. As soon as there are a <maximum>
number of attempts for a user/host, the number of stored attempts is
reduced to <minimum>. A <maximum> of 0 means no limits. Make
sure that <minimum> is larger then any rule specified. We recommend
a value of "1000-1200". |
| db_home |
Directory for db locking and logging files. |
Path to a directory where Berkeley DB can place it’s locking and
logging files. Make sure this dir is writable. |
| host_db |
Path to host database file. |
Path to the Berkeley DB which is used to log the host responsible for
failed authentication attempts. |
| host_purge |
Purge time for the host database. |
Defines how long failed hosts are retained in the host database.
Defaults to 1 day. |
| host_rule |
Rule for host blacklisting. |
The rule (see below for format) which defines the conditions under which
a failed hosts will be blackisted. |
| host_whitelist |
Host that do not need to be tracked. |
;-seperated list of host that do not need to be tracked. You can specify
single IP addresses here or use subnets. For example 1.1.1.1 or
1.1.1.1/24 |
| host_blk_cmd |
Host block command |
Deprecated for security reasons. Please use host_block_cmd |
| host_clr_cmd |
Host clear command |
Deprecated for security reasons. Please use host_clear_cmd |
| host_block_cmd |
Host block command |
Command that should be run when a host is checked, and is currently
blocked. Within the command, the strings %u, %h and %s are substituted
with username, host and service. Not all need to be used. Please see the
manpage of pam_abl.conf for the correct syntax. |
| host_clear_cmd |
Host clear command |
Command that should be run when a host is checked, and is currently
clear. Within the command, the strings %u, %h and %s are substituted with
username, host and service. Not all need to be used. Please see the
manpage of pam_abl.conf for the correct syntax. |
| user_db |
Path to user database file. |
Path to the Berkeley DB which is used to log the user responsible for
failed authentication attempts. |
| user_purge |
Purge time for the user database. |
Defines how long failed users are retained in the user database.
Defaults to 1 day. |
| user_rule |
Rule for user blacklisting. |
The rule (see below for format) which defines the conditions under which
a failed users will be blackisted. |
| user_whitelist |
Users that do not need to be tracked. |
;-seperated list of users whose attempts do not need to be recorded.
This does not prevent the machine they are using from being blocked. |
| user_blk_cmd |
User block command |
Deprecated for security reasons. Please use user_block_cmd |
| user_clr_cmd |
User clear command |
Deprecated for security reasons. Please use clear_block_cmd |
| user_blk_cmd |
User block command |
Command that should be run when a user is checked, and is currently
blocked. Within the command, the strings %u, %h and %s are substituted
with username, host and service. Not all need to be used. |
| user_clr_cmd |
User block command |
Command that should be run when a user is checked, and is currently
clear. Within the command, the strings %u, %h and %s are substituted with
username, host and service. Not all need to be used. |
USAGE¶
Typically pam_abl.so is added to the auth stack as a required module just before
whatever modules actually perform authentication. Here’s a fragment of
the PAM config for a production server that is running pam_abl:
auth required /lib/security/pam_env.so
auth required /lib/security/pam_abl.so
config=/etc/security/pam_abl.conf
auth sufficient /lib/security/pam_unix.so likeauth nullok
auth required /lib/security/pam_deny.so
Although all of accepted arguments can be supplied here they will usually be
placed in a separate config file and linked to using the config argument as in
the above example. The pam_abl command line tool reads the external config
file (/etc/security/pam_abl.conf in this case) to find the databases so in
order for it work correctly an external config should be used.
EXAMPLES¶
auth required /lib/security/pam_env.so
auth required /lib/security/pam_abl.so config=/etc/security/pam_abl.conf
auth sufficient /lib/security/pam_unix.so likeauth nullok
auth required /lib/security/pam_deny.so
SEE ALSO¶
pam_abl.conf(5),
pam_abl(1)
AUTHORS¶
Lode Mertens <pam-abl@danta.be>
Andy Armstrong <andy@hexten.net>
Chris Tasma <pam-abl@deksai.com>
AUTHOR¶
Chris Tasma
Author.
