NAME¶

qmicli - Control QMI devices

DESCRIPTION¶

Usage:¶

lt-qmicli [OPTION...] - Control QMI devices

Help Options:¶

-h, --help

Show help options

--help-all

Show all help options

--help-dms

Show Device Management Service options

--help-nas

Show Network Access Service options

--help-wds

Show Wireless Data Service options

--help-pbm

Show Phonebook Management options

--help-uim

Show User Identity Module options

--help-wda

Show Wireless Data Administrative options

DMS options

--dms-get-ids

Get IDs

--dms-get-capabilities

Get capabilities

--dms-get-manufacturer

Get manufacturer

--dms-get-model

Get model

--dms-get-revision

Get revision

--dms-get-msisdn

Get MSISDN

--dms-get-power-state

Get power state

--dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]

Set PIN protection in the UIM

--dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]

Verify PIN

--dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]

Unblock PIN

--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]

Change PIN

--dms-uim-get-pin-status

Get PIN status

--dms-uim-get-iccid

Get ICCID

--dms-uim-get-imsi

Get IMSI

--dms-uim-get-state

Get UIM State

--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]

Get CK Status

--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]

Disable CK protection

--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]

Unblock CK

--dms-get-hardware-revision

Get the HW revision

--dms-get-operating-mode

Get the device operating mode

--dms-set-operating-mode=[(Operating mode)]

Set the device operating mode

--dms-get-time

Get the device time

--dms-get-prl-version

Get the PRL version

--dms-get-activation-state

Get the state of the service activation

--dms-activate-automatic=[Activation Code]

Request automatic service activation

--dms-activate-manual=[SPC,SID,MDN,MIN]

Request manual service activation

--dms-get-user-lock-state

Get the state of the user lock

--dms-set-user-lock-state=[(disable|enable),(current lock code)]

Set the state of the user lock

--dms-set-user-lock-code=[(old lock code),(new lock code)]

Change the user lock code

--dms-read-user-data

Read user data

--dms-write-user-data=[(User data)]

Write user data

--dms-read-eri-file

Read ERI file

--dms-restore-factory-defaults=[(Service Programming Code)]

Restore factory defaults

--dms-validate-service-programming-code=[(Service Programming Code)]

Validate the Service Programming Code

--dms-get-band-capabilities

Get band capabilities

--dms-get-factory-sku

Get factory stock keeping unit

--dms-list-stored-images

List stored images

--dms-select-stored-image=[modem#,pri#] where # is the index

Select stored image

--dms-delete-stored-image=[modem#|pri#] where # is the index

Delete stored image

--dms-reset

Reset the service state

--dms-noop

Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options

--nas-get-signal-strength

Get signal strength

--nas-get-signal-info

Get signal info

--nas-get-tx-rx-info=[(Radio Interface)]

Get TX/RX info

--nas-get-home-network

Get home network

--nas-get-serving-system

Get serving system

--nas-get-system-info

Get system info

--nas-get-technology-preference

Get technology preference

--nas-get-system-selection-preference

Get system selection preference

--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma]

Set system selection preference

--nas-network-scan

Scan networks

--nas-get-cell-location-info

Get Cell Location Info

--nas-reset

Reset the service state

--nas-noop

Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options

--wds-start-network=[(APN),(PAP|CHAP|BOTH),(Username),(Password)]

Start network (Authentication, Username and Password are optional)

--wds-follow-network

Follow the network status until disconnected. Use with `--wds-start-network'

--wds-stop-network=[Packet data handle]

Stop network

--wds-get-packet-service-status

Get packet service status

--wds-get-packet-statistics

Get packet statistics

--wds-get-data-bearer-technology

Get data bearer technology

--wds-get-current-data-bearer-technology

Get current data bearer technology

--wds-get-profile-list=[3gpp|3gpp2]

Get profile list

--wds-get-default-settings=[3gpp|3gpp2]

Get default settings

--wds-reset

Reset the service state

--wds-noop

Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options

--pbm-get-all-capabilities

Get all phonebook capabilities

--pbm-noop

Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options

--uim-read-transparent=[0xNNNN,0xNNNN,...]

Read a transparent file given the file path

--uim-get-file-attributes=[0xNNNN,0xNNNN,...]

Get the attributes of a given file

--uim-get-card-status

Get card status

--uim-reset

Reset the service state

--uim-noop

Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options

--wda-set-data-format=[raw-ip|802-3]

Set data format

--wda-get-data-format

Get data format

--wda-noop

Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

Application Options:¶

-d, --device=[PATH]

Specify device path

--get-service-version-info

Get service version info

--device-set-instance-id=[Instance ID]

Set instance ID

--device-open-version-info

Run version info check when opening device

--device-open-sync

Run sync operation when opening device

-p, --device-open-proxy

Request to use the 'qmi-proxy' proxy

--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]

Open device with specific link protocol and QoS flags

--client-cid=[CID]

Use the given CID, don't allocate a new one

--client-no-release-cid

Do not release the CID when exiting

-v, --verbose

Run action with verbose logs, including the debug ones

--silent

Run action with no logs; not even the error/warning ones

-V, --version

Print version

qmicli 1.10.2 Copyright (2012) Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

SEE ALSO¶

The full documentation for qmicli is maintained as a Texinfo manual. If the info and qmicli programs are properly installed at your site, the command

info qmicli

should give you access to the complete manual.