NAME¶
foo2oak - Convert Ghostscript pbmraw, pgmraw or bitcmyk format into an OAKT
printer stream
SYNOPSIS¶
foo2oak [
options] <
pbmraw-file >
OAKT-file
foo2oak [
options] <
pgmraw-file >
OAKT-file
foo2oak [
options] <
bitcmyk-file >
OAKT-file
DESCRIPTION¶
foo2oak converts Ghostscript pbmraw or bitcmyk output formats to
monochrome or color OAKT streams, for driving the HP Color LaserJet 1500 laser
printer, Kyocera KM-1636/KM-2035 copiers, and other OAKT-based printers.
COMMAND LINE OPTIONS¶
Normal Options¶
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
- -c
- Force color mode if autodetect doesn't work.
- -d duplex
- Duplex code to send to printer [1].
| 1 |
off |
2 |
long edge |
3 |
short edge |
- -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [1].
|
| Media |
Code |
|
| autoselect |
0 |
| plain |
1 |
| preprinted |
2 |
| letterhead |
3 |
| transparency |
4 |
| prepunched |
5 |
| labels |
6 |
| bond |
7 |
| recycled |
8 |
| color |
9 |
| cardstock |
10 |
| envelope |
11 |
| light |
13 |
| tough |
14 |
| vellum |
15 |
| rough |
16 |
| thick |
19 |
| highqual |
20 |
- -p paper
- Paper code to send to printer [1].
| 1 |
letter |
3 |
ledger |
| 5 |
legal |
6 |
statement |
| 7 |
executive |
8 |
A3 |
| 9 |
A4 |
11 |
A5 |
| 12 |
B4 |
13 |
B5jis |
| 14 |
folio |
19 |
env9 |
| 20 |
env10 |
27 |
envDL |
| 28 |
envC5 |
30 |
envC4 |
| 37 |
envMonarch |
257 |
A6 |
| 258 |
B6 |
259 |
B5iso |
| 260 |
env6 |
|
|
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [600x600].
- -s source
- Source (InputSlot) code to send to printer [7].
| 1 |
tray1 |
2 |
tray2 |
| 4 |
manual |
7 |
auto |
- -J filename
- Filename string to send to printer.
- -U username
- Username string to send to printer.
Printer Tweaking Options¶
These are the options used to customize the operation of
foo2oak for a
particular printer.
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left
corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right
corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the OAKT stream [3].
| 0 |
don't send any logical clipping amounts |
| 1 |
only send Y clipping amount |
| 2 |
only send X clipping amount |
| 3 |
send both X and Y clipping amounts |
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input
only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- -M mirror
- Mirror bytes. Mirror is 0 for Kyocera KM-1635/KM-2035 and 1 for the HP
Color LaserJet 1500. The default is 1.
- -z model
- Model is 0 for the HP Color LaserJet 1500, and 1 for the Kyocera
KM-1635/KM-2035 copiers. The default is 0.
Debugging Options¶
These options are used for debugging
foo2oak.
- -S plane
- Output just a single color plane from a color print and print it on the
black plane. The default is to output all color planes.
| 1 |
Cyan |
| 2 |
Magenta |
| 3 |
Yellow |
| 4 |
Black |
- -D level
- Set Debug level [0].
EXAMPLES¶
Create a black and white OAKT stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw
-sOutputFile=- - < testpage.ps
| foo2oak -r600x600 -g5100x6600 -p1 >testpage.oak
Create a color OAKT stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk
-sOutputFile=- - < testpage.ps
| foo2oak -r600x600 -g5100x6600 -p1 >testpage.oak
FILES¶
/usr/bin/foo2oak
SEE ALSO¶
foo2oak-wrapper(1),
oakdecode(1)
AUTHOR¶
Rick Richardson <rick.richardson@comcast.net>
http://foo2oak.rkkda.com/
