NAME¶

ssh-cron - cron-like daemon able to use ssh-connections

SYNOPSIS¶

ssh-cron [OPTIONS] [crontab-file] [OPTIONS] - cf. section OPTIONS [crontab-file] - file containing jobs to run.

DESCRIPTION¶

Consider the situation where a computer every now and then must access a remote computer to do some useful things at that remote computer (like running a stealth(1) file integrity scan). In order to do so the computer must be allowed to make ssh(1) connections to the remote computer. But since the commands are not executed by the user but by cron(1), the ssh-keys which are required to access the remote computer cannot use passphrases. This is an undesirable situation: if the computer running the ssh commands gets compromised, then the remote computers are compromised as well, since the attacker may access these remote systems using ssh keys not requiring pass phrases. Ssh-Cron offers a way out of this undesirable situation, while still allowing commands to be executed on remote computers. Here’s how this is realized:

o

Normally, ssh-cron runs as a daemon program. When ssh-cron starts it first reads and parses a crontab-like specification file. Following this, ssh-cron spawns a child process, and terminates.

o

Ssh-Cron’s daemon process itself spawns an ssh-agent(1) child process, executing all scheduled commands.

o

In addition, ssh-cron’s daemon defines communcation channels between itself and its ssh-agent(1) child process;

o

Ssh-Cron’s daemon sends the command ssh-add(1) to its child process as its first command to execute, and using normal user-interaction means (e.g., using ssh-askpass(1)) ssh-agent is provided with the required passphrase(s) for the ssh key(s).

o

Ssh-Cron’s daemon now monitors the time, firing off scheduled commands at their required moments in time. If these commands require access to remote computers, then this access is granted, as ssh-agent is able to provide the passphrase(s).

o

If an ssh-cron daemon process is already running, then the --reload option (see below), can be used to load the ssh-cron daemon with the commands and environment variable settings from another crontab-file, replacing the currently stored commands and environment settings by the ones provided in the reloaded file.

When shell control characters (like redirection symbols) must be used in command specifications, they should be escaped. E.g., as in echo hello world \> /dev/null. Users sharing a computer each define their own ssh-cron specification file. When a user logs out and leaves the system the daemon process continues to run, executing its scheduled commands at their scheduled times, using ssh-keys whenever required. If the accounts for which ssh-cron jobs are running are ever compromised, the remote computers remain safe, as the passphrases of the available ssh-keys remain unavailable. To prevent unauthorized modifications of the commands scheduled by the ssh-cron daemon themselves a passphrase is required when starting ssh-cron’s daemon process. The passphrase itself is not stored by the daemon (instead, it stores a sha256(1) hash value), which avoids access to the ssh-cron daemon’s passphrase by browsing the computer’s memory. The passphrase may be empty, but even then that empty passphrase must be provided when reloading ssh-cron daemon’s scheduled commands. The scheduled commands may be listed, however. This is allowed without providing a passphrase since the file containing the scheduled commands will usually also be available on the computer. Likewise, since a user may always terminate his/her own programs an ssh-cron daemon process can be terminated from another ssh-cron program using the --terminate command line option. The above-mentioned facilities are not supported by crontab(1) itself. Cron(1), which is responsible for executing scheduled crontab commands, has no access to the passphrases of ssh-keys (which are otherwise provided ssh-agent).

RETURN VALUE¶

Ssh-Cron returns 0 if the daemon was successfully started. Otherwise 1 is returned.

OPTIONS¶

Where available, single letter options are listed between parentheses following their associated long-option variants. Single letter options require arguments if their associated long options also require arguments. Several options have default values. Run ssh-cron --help for an overview of the implemented default option values. Also, several options can be specified in a configuration file (where this doesn’t hold true, it is explicitly mentioned at the relevant options). The configuration file (not to be confused with the file containing the scheduled commands, which is provided as ssh-cron command-line file argument) ignores empty lines and all information on lines starting at a hash-mark ( #, optionally preceded by blanks and/or tabs). The configuration file is used to specify ssh-cron’s options using their long variants. However, in the configuration file the initial hyphens of command-line options must be omitted, and optionally a colon may be appended to these long options names. Note that multi-word option arguments should not be surrounded by quotes. Examples:

    stdout
    syslog-facility: LOCAL0
    mailer: /usr/bin/mail -s "some subject" me@myhost.warpnet.nl
            

Command-line options always override configuration file options.

o

--agent=agent

 

absolute path to the agent program (plus its argument(s)) providing the ssh-keys.

By default /usr/bin/ssh-agent /bin/bash is used.

o

--config-file=path (-c)

 

config file containing long option specifications.

By default ~/.ssh-cron is used.

This option cannot be specified in the configuration file.

o

--help (-h)

 

basic usage information is written to the standard output stream (only interpreted in combination with --no-daemon).

This option cannot be specified in the configuration file.

o

--ipc-file=path (-p)

 

when ssh-cron runs as a daemon, then path specifies the path of the file holding the daemon’s shared memory ID and process ID. The ipc file must be available if ssh-cron is connecting to or starting a daemon process (the former situation occurs with the options --list, --reload, and --terminate). Ssh-Cron does not start a daemon process if it detects an existing ipc-file, which has to be removed by the user first. To end a daemon process use ssh-cron --terminate, or send a SIGINT ( ctrl-C) or SIGTERM signal to the process-id found as the second value in the ipc-file.

By default ~/.ssh-cron.ipc is used.

o

--list (-l)

 

list the currently defined environment settings and cron-commands (the crontab-file argument must be omitted). This option is incompatible with (--no-daemon, --reload,) and --terminate.

This option cannot be specified in the configuration file.

o

--log=path (-L)

 

log messages are appended to path. If path does not exist, it is created first.

o

--mailer=command (-m)

 

information written to the standard output or standard error streams of the commands executed by ssh-cron is sent by e-mail to the current user. Use --mailer to redefine (or to suppress sending e-mail by specifying an empty mailer command (i.e., --mailer "")).

By default /usr/bin/mail -s \"Ssh-cron $*\" $USER@localhost is used, with $* replaced by the exected command as specified in the crontab file argument.

o

--no-daemon

 

ssh-cron is not run as a daemon. To properly end ssh-cron if not running as a daemon, press the `Enter’ key, enter ctrl-C or send ssh-cron a SIGTERM signal. This option is incompatible with ( --list, --reload,) and --terminate.

This option cannot be specified in the configuration file.

o

--reload (-r)

 

reload the ssh-cron daemon with de cron-commands defined in the crontab-file argument (which must be provided). This option is incompatible with (--list, --no-daemon,) and --terminate.

This option cannot be specified in the configuration file.

o

--stdout (-s)

 

in addition to using a log file and syslog messages send all messages to the standard output. This option is not available if ssh-cron runs as a daemon process.

This option cannot be specified in the configuration file.

o

--syslog

 

messages are sent to the syslog daemon when this option is specified. By default syslog messages are written to the DAEMON facility with priority NOTICE.

o

--syslog-facility=facility

 

the facility that is used to write the syslog messages to. By default this is DAEMON. For an overview of facilities and their meanings, see, e.g., syslog(3). With ssh-cron the facilities DAEMON, LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7, and USER can be used.

By default facility DAEMON is used.

o

--syslog-priority=priority

 

the priority that is used to write the syslog messages to. By default this is NOTICE. For an overview of priorities and their meanings, see, e.g., syslog(3). With ssh-cron all defined priorities can be used. E.g., EMERG, ALERT, CRIT, ERR, WARNING, NOTICE, INFO and DEBUG.

By default priority NOTICE is used.

o

--syslog-tag=tag

 

syslog messages can be provided with a tag, which can be used to filter them from the log-files. See also section RSYSLOG FILTERING below.

By default the tag SSH-CRON is used.

o

--terminate (-t)

 

terminate a running ssh-cron daemon program, using the daemon’s process ID found in the ipc-file’s second value. The crontab-file argument must be omitted. This option is incompatible tt with (--list, --nodaemon,) and --reload . This option cannot be specified in the configuration file.

o

--verbose

 

additional messages about ssh-cron’s mode of operation are sent to ssh-cron’s log facilities (specified by --log, --syslog, and/or --stdout).

o

--version (-v)

 

ssh-cron’s version number is written to the standard output stream.

This option cannot be specified in the configuration file.

RSYSLOG FILTERING¶

When using rsyslogd(1) property based filters may be used to filter syslog messages and write them to a file of your choice. E.g., to filter messages starting with the syslog message tag (e.g., SSH-CRON) use

:syslogtag, isequal, "SSH-CRON:"   /var/log/ssh-cron.log
:syslogtag, isequal, "SSH-CRON:"   ~
        

Note that the colon is part of the tag, but is not specified with the syslog-tag option. This causes all messages having the SSH-CRON: tag to be written on /var/log/ssh-cron.log after which they are discarded. More extensive filtering is also supported, see, e.g., http://www.rsyslog.com/doc/rsyslog_conf_filter.html and http://www.rsyslog.com/doc/property_replacer.html

SEE ALSO¶

cron(1), crontab(1), crontab(5), , rsyslogd(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-askpass(1), stealth(1), syslog(3)

BUGS¶

None reported.

COPYRIGHT¶

This is free software, distributed under the terms of the `GNU General Public License’. Copyright remains with the author. ssh-cron is available at http://sshcron.sourceforge.net/.

ORGANIZATION¶

Center for Information Technology, University of Groningen.

AUTHOR¶

Frank B. Brokken ( f.b.brokken@rug.nl).