Scroll to navigation

AO-LOAD(1) General Commands Manual AO-LOAD(1)

NAME

ao-cal-freq - Calibrate AltOS flight computer frequency

SYNOPSIS

ao-cal-freq [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] [-v] [--verbose] [-n] [--nosave] [-o cal-value-output-file] [--output cal-value-output-file]

DESCRIPTION

ao-cal-freq drives the frequency calibration process and saves the result.

OPTIONS

This selects which tty device the debugger uses to communicate with the target device. The special name 'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial port connected to a suitable cc1111 debug node.
Search for a connected device. This requires an argument of one of the following forms:
TeleMega:2
TeleMega
2
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
Writes the resulting calibration value to the specified file.
Inhibits saving the calibration value on the device. Necessary for devices which don't have on-board configuration storage.
Makes ao-cal-freq chatty about communication with the target device.

USAGE

ao-cal-freq opens the target device, interactively calibrates the frequency, then shows the resulting calibration values and (optionally) saves them to configuration memory and/or a file.

AUTHOR

Keith Packard

ao-cal-freq