Verbose¶

Start daemon in debug mode, so that all internal debug information is printed out on the console.

Default: Off
    

Daemonize¶

If set to 1 DLT daemon is started in background as daemon. This option is only needed in System V init systems. In systemd based startup systems the daemon is started by spawning own process.

Default: 0
    

SendSerialHeader¶

If set to 1 DLT daemon sends each DLT message to the client with prepanding the serial header “DLS0x01”.

Default: 0
    

SendContextRegistration¶

If set to 1 each context which is registered from an application in the DLT daemon generates a message to inform the DLT client about the new context.

Default: 1
    

SendMessageTime¶

If set to 1 DLt daemon sends each second a DLT control message to the client with the current timestamp from the system.

Default: 0
    

ECUId¶

This value sets the ECU Id, which is sent with each DLT message.

Default: ECU1
    

SharedMemorySize¶

This value sets the size of the shared memory, which is used to exchange DLT messages between applications and daemon. This value is defined in bytes. If this value is changed the system must be rebooted to take effect.

Default: 100000
    

PersistanceStoragePath¶

This is the directory path, where the DLT daemon stores its runtime configuration. Runtime configuration includes stored log levels, trace status and changed logging mode.

Default: /tmp
    

LoggingMode¶

The logging console for internal logging of dlt-daemon. 0 = log to stdout, 1 = log to syslog, 2 = log to file (see LoggingFilename), 3 = log to stderr

Default: 0
    

LoggingLevel¶

The internal log level, up to which logs are written. LOG_EMERG = 0, LOG_ALERT = 1, LOG_CRIT = 2, LOG_ERR = 3, LOG_WARNING = 4, LOG_NOTICE = 5, LOG_INFO = 6, LOG_DEBUG = 7

Default: 6
    

LoggingFilename¶

If LoggingMode is set to 2 logs are written to the file path given here.

Default: /tmp/dlt.log
    

EnableLoggingFileLimit¶

Only relevant for logging in file (LoggingMode = 2). If EnableLoggingFileLimit is set to 0, the daemon logs to one logging file without any size limit. If EnableLoggingFileLimit is set to 1, the daemon considers the size limits configured by LoggingFileSize and LoggingFileMaxSize. If the limits are configured accordingly, multiple log files are used.

Default: 0
    

LoggingFileSize¶

Only considered for logging in file (LoggingMode = 2) and EnableLoggingFileLimit = 1. Maximum size in bytes of one logging file.

Default: 250000
    

LoggingFileMaxSize¶

Only considered for logging in file (LoggingMode = 2) and EnableLoggingFileLimit = 1. Maximum size in bytes of all logging files.

Default: 1000000
    

TimeOutOnSend¶

Socket timeout in seconds for sending to clients.

Default: 4
    

RingbufferMinSize¶

The minimum size of the Ringbuffer, used for storing temporary DLT messages, until client is connected.

Default: 500000
    

RingbufferMaxSize¶

The max size of the Ringbuffer, used for storing temporary DLT messages, until client is connected.

Default: 10000000
    

RingbufferStepSize¶

The step size the Ringbuffer is increased, used for storing temporary DLT messages, until client is connected.

Default: 500000
    

Daemon FIFOSize¶

The size of Daemon FIFO (MinSize: depend on pagesize of system, MaxSize: please check /proc/sys/fs/pipe-max-size) This is only supported for Linux.

Default: 65536
    

ContextLogLevel¶

Initial log-level that is sent when an application registers. DLT_LOG_OFF = 0, DLT_LOG_FATAL = 1, DLT_LOG_ERROR = 2, DLT_LOG_WARN = 3, DLT_LOG_INFO = 4, DLT_LOG_DEBUG = 5, DLT_LOG_VERBOSE = 6

Default: 4
    

ContextTraceStatus¶

Initial trace-status that is sent when an application registers. DLT_TRACE_STATUS_OFF = 0, DLT_TRACE_STATUS_ON = 1

Default: 0
    

ForceContextLogLevelAndTraceStatus¶

Force log level and trace status of contexts to not exceed “ContextLogLevel” and “ContextTraceStatus”. If set to 1 (ON) whenever a context registers or changes the log-level it has to be lower or equal to ContextLogLevel.

Default: 0
    

InjectionMode¶

If set to 0, the injection mode (see here) is disabled.

Default: 1
    

GatewayMode¶

Enable Gateway mode

Default: 0
    

GatewayConfigFile¶

Read gateway configuration from another location

Default: /etc/dlt_gateway.conf
    

DaemonFifoGroup¶

Owner group of daemon FIFO directory (If not set, primary group of dlt-daemon process is used) Application should have write permission to this group for tracing into dlt For this opton to work, dlt-daemon should have this group in it’s Supplementary group

Default: group of dlt-daemon process (/tmp/dlt)
    

ControlSocketPath¶

Path to control socket.

Default: /tmp/dlt-ctrl.sock
    

OfflineTraceDirectory¶

Store DLT messages to local directory, if not set offline Trace is off.

Default: /tmp
    

OfflineTraceFileSize¶

This value defines the max size of a offline trace file, if offline trace is enabled. This value is defined in bytes. If the files size of the current used log file is exceeded, a new log file is created.

Default: 1000000
    

OfflineTraceMaxSize¶

This value defines the max offline Trace memory size, if offline trace is enabled. This value is defined in bytes. If the overall offline trace size is excedded, the oldest log files are deleted, until a new trace file fits the overall offline trace max size.

Default: 4000000
    

OfflineTraceFileNameTimestampBased¶

Filename timestamp based or index based. 1 = timestamp based, 0 = index based

Default: Function is disabled
    

PrintASCII¶

Prints each received DLT message from the application in ASCII to the local console. This option should only be anabled for debugging purpose.

Default: Function is disabled
    

PrintHex¶

Prints each received DLT message from the application in ASCII to the local console. The payload is printed in Hex. This option should only be anabled for debugging purpose.

Default: Function is disabled
    

PrintHeadersOnly¶

Prints each received DLT message from the application in ASCII to the local console. Only the header is printed. This option should only be anabled for debugging purpose.

Default: Function is disabled
    

RS232DeviceName¶

If this value is set to a serial device name, e.g. /dev/ttyS0, a serial port is used for logging to a client.

Default: Serial port for logging is disabled
    

RS232Baudrate¶

The used serial baud rate, if serial loggin is enabled. The RS232DeviceName must be set to enable serial logging.

Default: 115200
    

RS232SyncSerialHeader¶

If serial logging is enabled, each received DLT message is checked to contain a serial header. If the DLT message contains no serial header, the message is ignored.

Default: Function is disabled
    

TCPSyncSerialHeader¶

Each received DLT message on a TCP connection is checked to contain a serial header. If the DLT message contains no serial header, the message is ignored.

Default: Function is disabled
    

SendECUSoftwareVersion¶

Periodically send ECU version info. 0 = disabled, 1 = enabled

Default: Function is disabled
    

OfflineLogstorageMaxDevices¶

Maximum devices to be used as offline logstorage devices. 0 = disabled, 1 .. DLT_OFFLINE_LOGSTORAGE_MAX_DEVICES

Default: 0 (Function is disabled)
    

OfflineLogstorageDirPath¶

Path to store DLT offline log storage messages.

Default: off
    

OfflineLogstorageTimestamp¶

Appends timestamp in log file name. 0 = disabled, 1 = enabled

Default: 0
    

OfflineLogstorageDelimiter¶

Appends delimiter in log file name, only punctuation characters allowed.

Default: _
    

OfflineLogstorageMaxCounter¶

Wrap around value for log file count in file name.

Default: UINT_MAX
    

OfflineLogstorageCacheSize¶

Maximal used memory for log storage cache in KB.

Default: 30000 KB
    

UDPConnectionSetup¶

Enable or disable UDP connection. 0 = disabled, 1 = enabled

UDPMulticastIPAddress¶

The address on which daemon multicasts the log messages

UDPMulticastIPPort¶

The Multicase IP port. Default: 3491