NAME¶

fence_ipmilan - Fence agent for IPMI

fence_ilo3 - Fence agent for HP iLO3 (symlink)

fence_ilo4 - Fence agent for HP iLO4 (symlink)

fence_ilo5 - Fence agent for HP iLO5 (symlink)

fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink)

fence_imm - Fence agent for IBM Integrated Management Module (symlink)

fence_idrac - Fence agent for Dell iDRAC (symlink)

DESCRIPTION¶

fence_imm is a Power Fencing agent which can be used with machines controlled by IPMI. This agent calls support software ipmitool (http://ipmitool.sf.net/).

WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.

The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

PARAMETERS¶

-o, --action=[action]

Fencing action (Default Value: reboot)

-A, --auth=[auth]

IPMI Lan Auth type. (md5|password|none)

-C, --cipher=[cipher]

Ciphersuite to use (same as ipmitool -C parameter)

--hexadecimal-kg=[key]

Hexadecimal-encoded Kg key for IPMIv2 authentication

-a, --ip=[ip]

IP address or hostname of fencing device

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 623)

-P, --lanplus

Use Lanplus to improve security of connection (Default Value: 0)

-m, --method=[method]

Method to fence (onoff|cycle) (Default Value: onoff)

-p, --password=[password]

Login password or passphrase

-S, --password-script=[script]

Script to run to retrieve password

-n, --plug=[ip]

IP address or hostname of fencing device (together with --port-as-ip)

-L, --privlvl=[level]

Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)

--target=[targetaddress]

Bridge IPMI requests to the remote target address

-l, --username=[name]

Login name

-q, --quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v, --verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

--verbose-level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

-D, --debug-file=[debugfile]

Write debug information to given file

-V, --version

Display version information and exit

-h, --help

Display help and exit

--plug-separator=[char]

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--disable-timeout=[true/false]

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

--ipmitool-path=[path]

Path to ipmitool binary (Default Value: /usr/bin/ipmitool)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)

--port-as-ip

Make "port/plug" to be an alias to IP address

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 2)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--stonith-status-sleep=[seconds]

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

--ipmitool-timeout=[timeout]

Timeout (sec) for IPMI operation (Default Value: 2)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

--use-sudo

Use sudo (without password) when calling 3rd party software

--sudo-path=[path]

Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS¶

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

manpage

The operational behavior of this is not known.

validate-all

Validate if all required parameters are entered.

diag

Pulse a diagnostic interrupt to the processor(s).

STDIN PARAMETERS¶

action

Fencing action (Default Value: reboot)

auth

IPMI Lan Auth type. (md5|password|none)

cipher

Ciphersuite to use (same as ipmitool -C parameter)

hexadecimal_kg

Hexadecimal-encoded Kg key for IPMIv2 authentication

ip

IP address or hostname of fencing device Obsoletes: ipaddr

ipport

TCP/UDP port to use for connection with device (Default Value: 623)

lanplus

Use Lanplus to improve security of connection (Default Value: 0)

method

Method to fence (onoff|cycle) (Default Value: onoff)

password

Login password or passphrase Obsoletes: passwd

password_script

Script to run to retrieve password Obsoletes: passwd_script

plug

IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port

privlvl

Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)

target

Bridge IPMI requests to the remote target address

username

Login name Obsoletes: login

quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

verbose_level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

debug_file

Write debug information to given file Obsoletes: debug

version

Display version information and exit

help

Display help and exit

plug_separator

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

delay

Wait X seconds before fencing is started (Default Value: 0)

disable_timeout

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

ipmitool_path

Path to ipmitool binary (Default Value: /usr/bin/ipmitool)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

port_as_ip

Make "port/plug" to be an alias to IP address

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 2)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

stonith_status_sleep

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

ipmitool_timeout

Timeout (sec) for IPMI operation (Default Value: 2)

retry_on

Count of attempts to retry power on (Default Value: 1)

use_sudo

Use sudo (without password) when calling 3rd party software Obsoletes: sudo

sudo_path

Path to sudo binary (Default Value: /usr/bin/sudo)