table of contents
ENC(4) | Device Drivers Manual | ENC(4) |
NAME¶
enc
—
Encapsulating Interface
SYNOPSIS¶
To compile this driver into the kernel, place the following line in your kernel configuration file:
device enc
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_enc_load="YES"
DESCRIPTION¶
The enc
interface is a software loopback
mechanism that allows hosts or firewalls to filter
ipsec(4) traffic using any firewall package that hooks in
via the pfil(9) framework.
The enc
interface allows an administrator
to see incoming and outgoing packets before and after they will be or have
been processed by ipsec(4) via
tcpdump(1).
The “enc0
” interface
inherits all IPsec traffic. Thus all IPsec traffic can be filtered based on
“enc0
”, and all IPsec traffic could be
seen by invoking tcpdump(1) on the
“enc0
” interface.
What can be seen with tcpdump(1) and what will be passed on to the firewalls via the pfil(9) framework can be independently controlled using the following sysctl(8) variables:
Name | Defaults | Suggested |
net.enc.out.ipsec_bpf_mask | 0x00000003 | 0x00000001 |
net.enc.out.ipsec_filter_mask | 0x00000001 | 0x00000001 |
net.enc.in.ipsec_bpf_mask | 0x00000001 | 0x00000002 |
net.enc.in.ipsec_filter_mask | 0x00000001 | 0x00000002 |
For the incoming path a value of 0x1
means
“before stripping off the outer
header
” and 0x2
means
“after stripping off the outer
header
”. For the outgoing path 0x1
means “with only the inner header
” and
0x2
means “with outer and
inner headers
”.
incoming path |------| ---- IPsec processing ---- (before) ---- (after) ----> | | | Host | <--- IPsec processing ---- (after) ----- (before) ---- | | outgoing path |------|
Most people will want to run with the suggested defaults for
ipsec_filter_mask
and rely on the security policy
database for the outer headers.
Note that packets are captured by BPF before firewall processing. The special value 0x4 can be configured in the ipsec_bpf_mask and packets will be also captured after firewall processing.
EXAMPLES¶
To see the packets the processed via ipsec(4), adjust the sysctl(8) variables according to your need and run:
tcpdump -i enc0
SEE ALSO¶
August 9, 2017 | Debian |