Scroll to navigation

IFLIBTXTX(9) Kernel Developer's Manual IFLIBTXTX(9)

NAME

iflibtxrxDevice Dependent Transmit and Receive Functions

SYNOPSIS

#include <ifdi_if.h>

Interface Manipulation Functions

int
isc_txd_encap(void *sc, if_pkt_into_t pi);

void
isc_txd_flush(void *sc, uint16_t qid, uint32_t _pidx_or_credits_);

int *
isc_txd_credits_update(void *sc, uint16_t qid, uint32_t credits);

int *
isc_rxd_available(void *sc, uint16_t qsid, uint32_t cidx);

void *
isc_rxd_refill(void *sc, uint16_t qsid, uint8_t flid, uint32_t pidx, uint64_t *paddrs, caddr_t *vaddrs, uint16_t count);

void *
isc_rxd_flush(void *sc, uint16_t qsid, uint8_t flid, uint32_t pidx);

int
isc_rxd_pkt_get(void *sc, if_rxd_info_t ri);

Global Variables

extern struct if_txrx

DATA STRUCTURES

The device dependent mechanisms for handling packet transmit and receive are primarily defined by the functions named above. The if_pkt_info data structure contains statistics and identifying info necessary for packet transmission. While the data structure for packet receipt is the if_rxd_info structure.

The if_pkt_info Structure

The fields of struct if_pkt_info are as follows:

ipi_len
(uint32_t) Denotes the size of packet to be sent on the transmit queue.
ipi_segs
(bus_dma_segment_t *) A pointer to the bus_dma_segment of the device independent transfer queue defined in iflib.
ipi_qsidx
Unique index value assigned sequentially to each transmit queue. Used to reference the currently transmitting queue.
ipi_nsegs
(uint16_t) Number of descriptors to be read into the device dependent transfer descriptors.
ipi_ndescs
(uint16_t) Number of descriptors in use. Calculated by subtracting the old pidx value from the new pidx value.
ipi_flags
(uint16_t) Flags defined on a per packet basis.
ipi_pidx
(uint32_t) Value of first pidx sent to the isc_encap function for encapsulation and subsequent transmission.
ipi_new_pidx
(uint32_t) Value set after the termination of the isc_encap function. This value will become the first pidx sent to the isc-encap the next time that the function is called.
The Following Fields Are Used For Offload Handling
 
ipi_csum_flags
(uint64_t) Flags describing the checksum values, used on a per packet basis.
ipi_tso_segsz
(uint16_t) Size of the TSO Segment Size.
ipi_mflags
(uint16_t) Flags describing the operational parameters of the mbuf.
ipi_vtag
(uint16_t) Contains the VLAN information in the Ethernet Frame.
ipi_etype
(uint16_t) Type of ethernet header protocol as contained by the struct ether_vlan_header.
ipi_ehrdlen
(uint8_t) Length of the Ethernet Header.
ipi_ip_hlen
(uint8_t) Length of the TCP Header
ipi_tcp_hlen
(uint8_t) Length of the TCP Header.
ipi_tcp_hflags
(uint8_t) Flags describing the operational parameters of the TCP Header.
ipi_ipproto
(uint8_t) Specifies the type of IP Protocol in use. Example TCP, UDP, or SCTP.

The if_rxd_info Structure

The fields of struct if_rxd_info are as follows:

iri_qsidx
(uint16_t) Unique index value assigned sequentially to each receive queue. Used to reference the currently receiving queue.
iri_vtag
(uint16_t) Contains the VLAN information in the Ethernet Frame.
iri_len
(uint16_t) Denotes the size of a received packet.
iri_next_offset
(uint16_t) Denotes the offset value for the next packet to be receive. A Null value signifies the end of packet.
iri_cidx
(uint32_t) Denotes the index value of the packet currently being processed in the consumer queue.
iri_flowid
(uint32_t) Value of the RSS hash for the packet.
iri_flags
(uint)
Flags describing the operational parameters of the mbuf contained in the
receive packet.
iri_csum_flags
(uint32_t) Flags describing the checksum value contained in the receive packet.
iri_csum_data
(uint32_t) Checksum data contained in the mbuf(9) packet header.
iri_m
(struct mbuf *) A mbuf for drivers that manage their own receive queues.
iri_ifp
(struct ifnet *) A link back to the interface structure. Utilized by drivers that have multiple interface per softc.
iri_rsstype
(uint8_t) The value of the RSS hash type.
iri_pad
(uint8_t) The length of any padding contained by the received data.
iri_qidx
(uint8_t) Represents the type of queue event. If value >= 0 then it is the freelist id otherwise it is a completion queue event.

FUNCTIONS

All function calls are associated exclusively with either packet transmission or receipt. The void *sc passed as the first argument to all of the following functions represents the driver's softc.

Transmit Packet Functions

()
Transmit function that sends a packet on an interface. The if_pkt_info data structure contains data information fields describing the packet. This function returns 0 if successful, otherwise an error value is returned.
()
Flush function is called immediately after the isc_txd_encap function transmits a packet. It updates the hardware producer index or increments the descriptors used to pidx_or_credits in the queue designated by the qid number. This is often referred to as poking the doorbell register.
()
Credit function advances the buffer ring and calculates the credits (descriptors) processed. Until the I/O is complete it cleans the range in case of multisegments and updates the count of processed packets. The function returns the number of processed credits.

Receive Packet Functions

()
Function calculates the remaining number of descriptors from a position given by idx. The function returns this value.
()
Starting with the physical address paddrs, the function reads a packet into the rx_ring until a value designated by count is reached. vaddrs is typically not needed and is provided for devices that place their own metadata in the packet header.
()
Flush function updates the producer pointer on the free list flid in queue set number qid to pidx to reflect the presence of new buffers.
()
Process a single software descriptor. rxr->rx_base[i] contains a descriptor that describes a received packet. Hardware specific information about the buffer referred to by ri is returned in the data structure if_rxd_info

SEE ALSO

iflibdd(9), iflibdi(9), mbuf(9)

AUTHORS

This manual page was written by Nicole Graziano

March 23, 2017 Debian